Advertisement
Quick Links
Advertisement
Related Manuals for SERVETTO Automation Motion-V2
Summarization of Contents
Assembly Phases of the Electric Motion Motor
Determine Motor Direction of Rotation
Set the selector of rotation direction (O) on the letter "A" for the electric Motion motor installation.
Determine Motor Direction of Rotation
Set the selector of rotation direction (O) on the letter "B" for the electric Motion motor installation.
Drilling for Installation
Drill Mounting Holes
Place the drilling template and make holes of 5 mm diameter for the installation.
Fixing and Arm Locking
Motor Fixing and Arm Locking
Install the small arm and insert dowel pins, then fix with 4 screws.
Bumpers Replacement and Arm Locking
Replace bumpers and tighten socket head screws on the motion arm.
Dampers Replacement
Replace Dampers
Replace previous dampers with electric Motion ones, ensuring black colour on the back.
Electric Connection and Touch Installation
Electric Connection
Connect the transformer jack male to the female plug and plug into socket, checking red light.
Touch Device Battery Insertion
Insert the battery into the touch device in the correct direction for proper operation.
Touch Device Installation Possibilities
Install Touch Device
Install touch device to interior side of wardrobe door after milling, then place sticker on front.
Touch Programming
Program Touch Command
Place hand on touch sensor until beep to acquire touch command for opening/closing.
Remote Control Programming
Remote Control Battery Setup
Unscrew compartment, insert battery correctly, and retighten screws for remote control.
Program Remote Control Functions
Select compartment, press motor programming button, then press "MOT" on remote.
First Use of the Electric Motion
Initial Operation and Speed Regulation
Press MOT button or single button remote, then regulate opening speed using the trimmer.
Safety Precautions and Technical Specifications
General Safety Precautions
Appliance not for unsupervised use by children; handle power connections and avoid water/heat.
Ecology and Battery Disposal
Dispose of packaging and batteries responsibly; use mercury-free batteries.
Technical Specifications
Lists power sources, voltage, frequency, power, insulation class, and battery type.
Environmental Information and Warranty
Environmental Information
Proper disposal of product and packaging; recycling of natural resources.
Warranty Certificate and Conditions
Details warranty coverage, exclusions, and conditions for the product.
Need help?
Do you have a question about the Automation Motion-V2 and is the answer not in the manual?
Questions and answers