Download Print this page

LUM-TEC M82 Instructions Manual

Download this manual

Table of Contents

Need help?

Do you have a question about the M82 and is the answer not in the manual?

All LüM-TEC watches feature shock-resistant movements tested to international standards.

Dust ingress can stop the movement; prompt repair is needed if case or crystal is damaged.

Magnetic fields affect timekeeping; quartz watches recover, mechanical ones may need demagnetization.

Periodic maintenance of gaskets and crown is required to maintain water resistance standards.

Unscrew the crown to the 2nd position, turn clockwise to set the date, then push and screw down.

Unscrew the crown to the 3rd position, rotate counter clockwise to set time, then push and screw down.

Set the crown to the 1st position and rotate clockwise to wind the watch movement.

Pull crown to 2nd position, rotate counter clockwise to set date. Avoid 9 PM-1 AM for date changes.

Pull crown to 3rd position, turn to set hour/minute hands. Small second hand runs when crown is pushed back.

Press button 'A' to start/stop chronograph. Press button 'B' to reset chronograph hands to zero.

WIEGAND CUSTOM WATCH, LLC. 7245B INDUSTRIAL PARK BLVD MENTOR, OH 44060.

Reach out via phone (440-951-1296) or visit the official website www.Lum-Tec.com.

Follow LüM-TEC on Twitter (@LUMTECWATCHES) and Facebook for updates.