Features USB specification 2.0 compliant USB audio device class spec. 1.0 and USB HID class spec. 1.1 compliant Full-duplex recording and play-back 7.1 channel connector S/PDIF optical digital input and output 3.5mm jack connectors Support 48/44.1 KHz sampling rate for both playback and recording Dolby digital audio streaming via S/PDIF out Dual microphone support...
Package Contents ENMAB-8CM USB Audio Box Type A to Type B USB Cable Software Driver CD User Manual Hardware Description Figure 1. Buttons & Indicators Volume Mute: Press button to mute, press again to unmute audio outputs. Microphone Mute: Press button to mute, press again to unmute microphone.
Page 4
Microphone Mute LED: LED is on when microphone is unmute. Power/Activity LED: The light will be on when the ENMAB-8CM is on. The light will blink when activity is detected. Figure 2. Connectors (Front View) Headphones: Connects to the headphones.
Page 5
Surround Speakers: Connects to the surround speakers while in 4/6/8 channel modes. Center/Bass Speakers: Connects to the Center/Bass speakers while in 6/8 channel modes. Back Speakers: Connects to back speakers while in 8 channel mode. Figure 3. Connectors (Rear View) S/PDIF IN: Connects to the digital output of an external audio device using an optical S/PDIF cable.
Figure 4. Connectors (Side View) MIC (1) IN: Connects to a microphone (Mono left channel) MIC (2) IN: Connects to a microphone (Mono right channel) Driver Installation 1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear.
Page 7
3. Click “Next” to begin driver installation. 4. Select “Yes, I want to restart my computer now.”, and then click “Finish” to restart your computer. Page 7 ...
Page 8
Launch the Application Software 1. Double click the “USB Multi-Channel Audio Device” icon on the bottom right of the desktop to open the software. 2. “Main Setting” tab • Output Device: click the correct output device for your set up. •...
Page 9
3. “Mixer” tab • Click button to choose the playback and recording devices/sources. • Adjust the volume for a specific playback/recording device. 4. “Effect” tab In this table, you can setup the following sound effect: • Environment • Environment Size •...
The range is -4b to +4#. Vocal Cancellation: Attempts to detect and cancel vocal as much as possible. Technical Support For Technical Support or Installation Hotline contacts please visit our web site at http://www.encore-usa.com Page 10 MN4029400000...
Need help?
Do you have a question about the ENMAB-8CM and is the answer not in the manual?
Questions and answers