Table of Contents
Advertisement
ENIS-1670 - User's Guide
Chapter 3: Using the ENIS-1670 for the First Time
3.1 Charging Your ENIS-1670
For initial use, please make sure to fully charge the battery of ENIS-1670 device.
Just plug in the charger/adaptor into the DC socket to enter the charging state.
Make sure the charging time to be about 10 hours for the first two times to use, and
be about 5 hours in future use.
[Notes]: An inner setting lithium polymer battery is applied in this device. Please select a
specialized charger to charge the device.
Battery icon will scroll while charging.
For the first two times to use, we suggest to charge the device after the power is
used up, so as to extend the service life.
Please make sure to turn off the power switch when not using the device.
[Notes]:
1. If do not use for a long time, please make sure to charge and discharge the
battery for once within one month to avoid damage caused by overuse of battery.
2. When the device is shut down due to low power, the device will indicate that the
power is critically low and it is charging now. Please wait for a while at this
moment. It will enter the main interface automatically when the device gets
enough power.
3. Please make sure to charge the inner setting lithium polymer battery regularly.
Damage caused by overuse of lithium polymer battery is not covered by player
warranty range. Problems caused by using an unspecialized charger are also
not covered by player warranty range.
3.2 Turn ON/OFF ENIS-1670
Press and hold on the
description of device.
[Notes]:
1. System will shut down automatically under the status of low battery.
2. System will scan and repair disc automatically when restarted after illegal
shutdown, and the interface will stay in the image of progress bar for a while.
key to turn on/off the ENIS-1670 device. See also the
Advertisement
Table of Contents
