Schonstedt XT512 Instruction Manual

Pipe & cable locator

Advertisement

Quick Links

Instruction Manual
Model XTpc
Pipe & Cable Locator
Product Line
Manufactured By
Schonstedt Instrument Company
100 Edmond Road
Kearneysville, WV 25430
(304) 725-1050
Fax (304) 725-1095
Made in USA
February 2012
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XT512 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Section I: Operating Modes
Passive 50/60 Hz (P)
Describes the Passive 50/60 Hz operating mode for signal tracing.
Passive Cathodic (PC)
Describes the Passive Cathodic operating mode for corrosion detection.
Conductive (C)
Describes the Conductive operating mode using direct contact.
Inductive Clamp (IC)
Describes the Inductive Clamp operating mode using a clamp.
Inductive (I)
Describes the Inductive operating mode using an antenna.
Sonde (S)
Describes the Sonde operating mode for non-metallic pipes.
Section II: The XTpc Product Line
Products Covered By This Manual
Lists the specific XTpc models included in this manual.
Model Comparison Chart
Presents a feature comparison of different XTpc models.
Section III: Operating Controls
Receiver Controls Overview
Details the function of each control button on the XTpc receiver.
Transmitter Controls Overview
Details the function of each control button on the XTpc transmitter.
Section IV: Visual and Audible Indicators
Receiver Indicators
Explains the various display indicators on the XTpc receiver.
Transmitter Indicators
Explains the various display indicators on the XTpc transmitter.
Section V: Connectors and Accessories
Receiver Connector Details
Describes the connector used for audio output on the receiver.
Transmitter Connector Details
Details the 8-pin connector for accessories on the transmitter.
Standard Included Accessories
Lists the accessories that come standard with XTpc models.
Optional Accessories Available
Lists common optional accessories for the XTpc line.
Section VI: Batteries and Charger
Receiver Battery Type
Specifies the type of battery used for the XTpc receiver.
Transmitter Battery Pack
Details the rechargeable battery pack for the XTpc transmitter.
Transmitter Battery Charger
Explains the operation and indicators of the transmitter battery charger.
Section VII: Specifications
Receiver Specifications
Technical specifications for the XTpc receiver unit.
Transmitter Specifications
Technical specifications for the XTpc transmitter unit.
Section VIII: Operating Recommendations
Best Practices for Operation
Provides guidance and tips for optimal XTpc locator operation.
Section IX: Troubleshooting Guide
Common Issues and Solutions
Lists common problems, their causes, and recommended actions.
Section X: Technical Support
Contacting Support
Provides contact information for technical and sales support.
Section XI: Warranty / Service Information
Warranty Terms and Conditions
Details the warranty period, coverage, and exclusions for Schonstedt products.

Table of Contents