Related Manuals for Aeon co-in 125
Summarization of Contents
Instrument and Operation
Parts Location
Identifies key components and their locations on the vehicle's handlebars.
Instrument Panel Overview
Details the functions and indicators of the digital and analog instrument displays.
Main Switch Operation
Explains the functions of the main switch (ON, OFF, LOCK, FUEL, OPEN) and key usage.
Handlebar Lock System
Describes how to lock and unlock the handlebar for security.
Electric Starter Operation
Instructions for starting the engine using the electric starter and associated cautions.
Headlight Switch Functions
Explains the different positions of the headlight switch and their effects.
Headlight Dimmer Switch
Details the operation of the high and low beam settings for the headlight.
Horn Button Operation
Describes how to use the horn and provides a caution for silent zones.
Signal Light Switch
Explains how to operate the turn signals for right and left turns.
Helmet Box Storage
Information on accessing and using the under-seat helmet storage compartment.
Previously Inspection
Engine Oil Level Check
Instructions on how to check the engine oil level and the importance of regular checks.
Engine Oil Change Procedure
Step-by-step guide for changing the engine oil, including capacity and frequency.
Gear Oil Change
Details the recommended intervals and procedure for changing the gear oil.
Air Cleaner Maintenance
Guidance on cleaning and replacing the air filter, with cautions for dusty conditions.
Brake Pad Wear Inspection
How to inspect brake pads for wear and when to replace them.
Brake Fluid Level Check
Instructions for checking and refilling the front and rear brake fluid.
Brake Light Check
Procedure to verify the functionality of the brake light.
Signal Light Functionality Check
Steps to ensure the front and rear signal lights are working correctly.
Spark Plug Inspection
Information on spark plug fouling, gap, and the standard type used.
Battery Maintenance and Storage
Details on the sealed battery type, maintenance, and storage instructions.
Tire Inspection and Pressure
Guidance on inspecting tires for damage and checking normal tire pressure.
Shock Absorber Check
Method to check the function of front and rear shock absorbers.
Front and Rear Light Check
Procedure to check the operation of all front and rear lights.
Horn Functionality Check
Steps to confirm the horn is working correctly.
License Plate Screw Check
Instruction to inspect the screws securing the license plate.
Muffler and Exhaust Check
How to check the muffler sound and for exhaust leaks.
Idle Speed Adjustment
Information regarding factory-set idle speed and recommendations for EFI system service.
Fuse Replacement
Guidance on replacing blown fuses and a list of fuse ratings.
Engine Start-Up and Caution
Engine Start-Up Procedure
Step-by-step instructions and cautions for starting the engine.
Speed Control Operation
How to control speed by rotating the throttle handle.
Correct Riding Point
Vehicle Performance Maintenance
Guidelines for new vehicle break-in and maintenance intervals for performance.
Brake Application Technique
Proper technique for applying both front and rear brakes simultaneously.
Stopping the Vehicle
Procedures for safely stopping the vehicle and approaching a parking spot.
Completing a Stop
How to turn off the engine safely after the vehicle has completely stopped.
Parking Procedures
Instructions on how to park the vehicle safely on a flat surface.
Troubleshooting
General Troubleshooting
Basic steps for diagnosing and addressing engine start or running issues.
Need help?
Do you have a question about the co-in 125 and is the answer not in the manual?
Questions and answers