Related Manuals for SkyLine M-2
Summarization of Contents
User Manual and Troubleshooting
Getting Started: Instructions
Read the manual carefully before operating the machine to ensure proper use.
Troubleshooting Common Issues
Steps to diagnose and resolve common issues when the machine does not function properly.
Environmental Compliance and Disposal
Product Disposal Guidelines
Guidelines for the separate collection and disposal of the product at the end of its useful life.
Machine Installation and User Requirements
Installation and Placement
Proper placement of the machine on a flat surface with adequate space for air circulation.
User Safety and Restrictions
Information regarding user capabilities and supervision requirements for safe operation.
Electrical Safety and Product Mixing
Electrical Precautions
Important notes on voltage, grounding, and avoiding multiple plugs or extension cords.
Product Preparation Guidelines
Instructions on mixing product concentrate with water, ensuring minimum sugar content.
Machine Operation and Slush Consistency
Bowl Filling and Operation Rules
Proper procedure for filling the bowl and operating the machine without product or only water.
Adjusting Slush Consistency
How to adjust the machine for optimal slush consistency, including milk-based products.
Control Panel Overview
Model 1 Control Panel
Description of the switches and indicators on the control panel for Model 1.
Models 2 & 3 Control Panels
Description of control panel switches and indicators for Models 2 and 3.
Operating Procedures: Slush and Timer
Making Slush
Step-by-step guide on how to operate the machine to produce slush.
Timer Function for Night Mode
Instructions for setting the timer for the night function (cold drink dispenser).
Advanced Operation and Daily Cleaning Start
Cold Drink Dispensing
How to use the machine to make cold drinks, specifying the correct bowl.
Daily Cleaning: Initial Steps
Initial steps for daily cleaning: emptying the bowl and rinsing with water.
Daily Cleaning: Bowl and Spiral Parts
Bowl Removal and Cleaning
Steps to empty the bowl and prepare it for thorough cleaning.
Spiral Blade and Gasket Cleaning
Instructions for removing and cleaning the spiral blade and associated gaskets.
Daily Cleaning: Taps and Components
Tap Component Cleaning and Reassembly
Detailed steps for disassembling, cleaning, and reassembling tap components.
Cleaning Individual Components
Specific instructions for cleaning gaskets, including precautions against abrasive cleaners.
Part Replacement and Spout Maintenance
Replacing Gaskets and Auger
Guidance on correctly replacing gaskets, auger, and the bowl.
Spout Disassembly and Care
Steps for disassembling, washing, and lubricating spout parts.
Lubrication and Monthly Maintenance Checks
Component Lubrication
Daily lubrication points for the machine's components as indicated in the diagrams.
Monthly Maintenance Schedule
Routine checks for specific parts to be performed monthly.
Basic Sanitizing Operations
Sanitizing Procedure
Steps for sanitizing the machine using tepid water and avoiding hot water.
Bowl Removal for Sanitizing
Instructions for safely removing the bowl for cleaning and sanitizing.
Cleaning Operation: Spiral Blade and Bowl Gasket
Removing Spiral Blade and Suction Gasket
Method for removing the spiral blade and suction cap gasket.
Removing Bowl Gasket
Procedure for removing the bowl gasket from the evaporator tube.
Cleaning Operation: Tap Components
Disassembling and Cleaning Tap Parts
Detailed steps for removing the pin, handle, tap pin, and tap spring.
Cleaning Operation: Gaskets
Cleaning Various Gaskets
Instructions for carefully cleaning suction cap, tap o-ring, lower gasket, and bowl gasket.
Reassembly of Components
Reassembling Bowl Gasket
How to correctly position and fix the bowl gasket on the evaporator tube.
Inserting Spiral Blade and Gasket
Procedure for inserting the suction cap gasket and the spiral blade, including lubrication.
Reassembly of the Tap
Reassembling Tap Components
Steps for lubricating and reassembling the tap spring, tap pin, and handle.
Drip Tray Assembly and Disassembly
Drip Tray Installation
How to install the drip tray by connecting hooks to panel slots and pushing down.
Drip Tray Removal
Procedure for removing the drip tray, including removing the small grate first.
Monthly Maintenance: Condenser and Specifications
Condenser Cleaning
Weekly cleaning of the condenser with a brush to prevent damage.
Machine Specifications Plate
Information on the machine's identification plate, including model, voltage, and power.
Spare Parts List
Parts List - Model 1
List of spare parts for Model 1, with part numbers and descriptions.
Parts List - Models 2 & 3
List of spare parts for Models 2 and 3, with part numbers and descriptions.
Wiring Diagrams and Component Lists
Model 1 Wiring Diagram
Schematic showing electrical connections for Model 1, with a list of components.
Model 2 Wiring Diagram
Schematic showing electrical connections for Model 2, with a list of components.
Model 3 Wiring Diagram
Model 3 Wiring Diagram
Schematic showing electrical connections for Model 3, with a list of components.
Warranty and General Sale Conditions
Manufacturer's Warranty Details
Details of the warranty period, exclusions, and conditions for repairs.
Delivery and Competent Court
Information on machine delivery terms and the competent court for disputes.
Need help?
Do you have a question about the M-2 and is the answer not in the manual?
Questions and answers