Advertisement
Quick Links
11/95 AWA123-1089
Montageanweisung
Installation Instructions
Notice d installation
P10(4)-...
NZM 10(4)-...N/B
NZM 10(4)-...(N)(S)(H) /ZM (M, V)-...
(-NA)
K300-NZM 10
K2x120-NZM 10
K2x240-NZM 10
RG-NZM 10
K2x240W-NZM 10
K2x240 IP-NZM 10
Istruzioni per il montaggio
Instrucciones de montaje
Lebensgefahr durch elektrischen Strom!
Nur Elektrofachkr fte und elektrotechnisch
unterwiesene Personen d rfen die im Folgen-
den beschriebenen Arbeiten ausf hren.
Beachten Sie f r die Installation der Ger te die l nder-
spezifischen Vorschriften.
Electric current! Danger to life!
Only skilled or instructed persons may carry out the
following operations.
The national regulations/specificationes must be
observed for the installation of the devices.
Tension lectrique dangereuse !
Seules les personnes qualifi es et averties doivent
ex cuter les travaux ci-apr s.
Veuillez respecter les normes de mise en oeuvre
sp cifiques aux diff rents pays.
Tensione elettrica: Pericolo di morte!
Solo persone abilitate e qualificate possono eseguire
le operazione di seguito riportate.
Per l installazione degli apparecchi necessario
rispettare le normative specifiche di ciascun paese.
`Corriente el ctrica! `Peligro de muerte!
El trabajo a continuaci n descrito debe ser realizado
por personas cualificadas y advertidas.
Para la instalaci n de los aparatos han de tenerse en
cuenta las normativas/especificaciones a nivel local.
10 mm
Ø 2 mm
PZD 2
5 mm
1/11
Advertisement
Related Manuals for Moeller P10 Series
Summarization of Contents
General Safety Warnings
Electric Current Danger to Life
Warning about danger to life from electric current and requirement for skilled personnel.
National Regulations Compliance
Requirement to observe national regulations for the installation of devices.
Installation Dimensions and Mounting
Mounting Orientation and Clearances
Diagrams showing mounting angles and required minimum clearance for installation.
Enclosure Mounting Specifications
Technical drawing with dimensions for panel mounting and enclosure cutouts.
Trip Block Installation
Mounting Trip Block (Steps 1-3)
Step-by-step instructions for mounting the trip block and setting the device to OFF.
Trip Block Adjustments
Adjusting Thermal Release Time (tr)
Instructions for adjusting the thermal release time (tr) setting on the trip block.
Adjusting Instantaneous Trip Current (Irmv)
Instructions for adjusting the instantaneous trip current (Irmv) setting on the trip block.
Thermal Memory and Testing
Thermal Memory Function Explained
Explanation of the thermal memory feature and delay before reclosing after tripping.
Operational Testing Procedures
Guides for performing operational tests, including 'push to trip' function.
Final Tests and Connections
Accessory Installation (SVB-NZM 10)
Instructions for installing the SVB-NZM 10 accessory or variant.
Terminal Connections Guide
Diagrams illustrating how to make terminal connections with specified torque.
Terminal Wiring and Specifications
Wiring K22 x 21 and K300 Terminals
Specifications for wiring K22 x 21 and K300 terminals, including wire size and torque.
Wiring K2 x 120 and K2 x 240 Terminals
Specifications for wiring K2 x 120 and K2 x 240 terminals, including wire size and torque.
Specific Model Wiring Examples
Wiring K22x21-NZM10 and K300-NZM10
Step-by-step wiring instructions for K22x21-NZM10 and K300-NZM10 models.
Wiring K2x120-NZM10 Model
Step-by-step wiring instructions for the K2x120-NZM10 model.
Additional Model Wiring Examples
Wiring K2x240-NZM10 Model
Step-by-step wiring instructions for the K2x240-NZM10 model.
Wiring K2x240IP-NZM10 Model
Step-by-step wiring instructions for the K2x240IP-NZM10 model.
Final Model Wiring and Dimensions
Wiring K2x240W-NZM10 and RG-NZM10
Wiring instructions for K2x240W-NZM10 and RG-NZM10 models.
RG-NZM10 Dimensional Data
Key dimensional specifications for the RG-NZM10 model.
Technical Specifications and UL Data
Current Limiting Data (UL 489)
Table detailing current limiting data for circuit breakers according to UL 489 standard.
Field Wiring Terminal Kit Specifications
Specifications for field wiring terminal kits, including wire size and tightening torque.
Product Discontinuation Notice
Discontinued Product Information
Notification that the product is discontinued and recommendation for successor products.
Need help?
Do you have a question about the P10 Series and is the answer not in the manual?
Questions and answers