Advertisement
Quick Links
height-adjustable bench
INDEX
By Section
Product
Product Name
Code
INSTALLATION SUPPORT DOCUMENTS
Typical Installation Sequence
LIVELLO
FRAMES AND WORKSURFACE
Rectangular Worksurface
HABWRL
Livello Frame
HABFLV
Frame Link
HABFLF
System Link - HAB to Interpret
HABFLS1
SCREENS AND GABLES
Fixed Centre Screen - Glass
HABCFG
Fixed Centre Screen - Solid
HABCFS
Fixed Centre Screen - Fabric
HABCFF
Desk Edge Screen - Solid
HABCDS
Desk Edge Screen - 6 mm Glass
HABCDG
Desk Edge Screen - 10 mm Glass
HABCDG
Desk Edge Screen - Fabric
HABCDF
HAB End Gable-Metal
HABCGEML 203a
HAB Cable Channel
HABFCC
HAB Mid Gable-Metal
HABCGMML
HAB End Gable-Solid
HABCGESL 203b
HAB Cable Channel
HABFCC
HAB Mid Gable-Solid
HABCGMSL
End Cover - Metal
HABCCEML 203c
Mid Cover - Metal
HABCCMML
Study Carrel
GYKB
ELECTRICS
Power Harness
HABEPH
High Capacity Power Module
HABEPMH
Standard Power Module
HABEPMS
Receptacle Outlet
HABERO
I-Connector
HABEIC
Base Feed
HABEBF
Chicago Base Feed
HABEBFCH
Base Feed Cover
HABEBC
E-Chain
YEEC
Central Electrical Grommet Option
CEG1
Central Electrical Grommet Option
CEG2
Under Worksurface Mount w/ Cable
YEPD6A
Tray
September 2019
*Click on the desired Installation Guide to jump to the Guide
page.
Guide
Last
No.
Updated
Product Name
Ceiling Feed
Sep 2018
Chicago Ceiling Feed
Power Pole - End
Ceiling Feed
101
May 2017
Chicago Ceiling Feed
Power Pole - Mid
Power Conservation System
HISPACE
102
May 2017
FRAMES AND WORKSURFACE
201a
May 2017
hiSpace Universal Frame
201b
May 2017
hiSpace Rectangular Worksurface
201c
May 2017
Frame Grommet Cap
202a
May 2017
SCREENS AND GABLES
202b
May 2017
hiSpace - Center Casual Screen - Solid
202c
May 2017
hiSpace Center Casual Screen - Fabric
202d
May 2017
hiSpace - Desk Edge Screen - Solid
May 2017
hiSpace - Desk Edge Screen - Fabric
hiSpace - Desk Edge Screen - Glass
ELECTRICS
Aug 2017
Power Harness
Power Box
Chicago Power Box
May 2017
Extension Harness
hiSpace Base Feed
204
Sep 2019
hiSpace Split Base Feed
hiSpace Chicago Base Feed
301a
Jun 2017
hiSpace Cable Riser
E-Chain - hiSpace
hiSpace Under Worksurface Cover
hiSpace Cable Tray Cover
hiSpace Ceiling Feed
301b
Jun 2017
hiSpace Chicago Ceiling Feed
hiSpace Power Pole
NAVIGATE
301c
May 2017
FRAMES AND WORKSURFACE
301d
Jun 2017
Navigate Frame
Navigate Frame Link
Navigate Rectangular Worksurface
Navigate Systems Link
Product
Guide
Last
Code
No.
Updated
Product Name
302a
Jan 2017
Navigate 120 Frame
HABECF
Navigate 120 Worksurface
HABECFCH
Navigate Wire Channel
HABEPP
302b
Jun 2017
Navigate Power Module
HABECF
Navigate E-Chain Vertical Cable Manager HNBEEE
HABECFCH
Navigate Power Pole
HABEPP
303
Jan 2018
Navigate 120 Mid Gable
HABEPC
Navigate Ceiling Feed
Navigate Single-Sided Frame
111
Jul 2017
Navigate Single-Sided Rectangular
HBBFYS
Extended Worksurface
HBBWRL
Navigate Single-Sided Rectangular
HHBFGC
Worksurface
SCREENS AND GABLES
211a
May 2017
HHBCCS
211b
May 2017
Navigate Desk Edge Screen - Glass
HHBCCF
212a
May 2017
Navigate Desk Edge Screen - Solid
HHBCDS
212b
May 2017
Navigate Desk Edge Screen - Fabric
HHBCDF
212c
May 2017
Navigate Fixed Center Screen - Glass
HHBCDG
Navigate Fixed Center Screen - Solid
311a
May 2017
Navigate Fixed Center Screen - Fabric
HHBEPH
Navigate Cable Channel
HHBEPB
Navigate End Gable - Metal
HHBEPBCH
Navigate Mid Gable - Metal
HHBEEH
311b
May 2017
Navigate Cable Channel
HHBEBF
Navigate Mid Gable - Solid
HHBEBFS
Navigate End Gable - Solid
HHBEBFCH
Navigate End Cover - Metal
HHBECR
311c
May 2017
Navigate Mid Cover - Metal
HHBEEC
311d
Aug 2017
Navigate End Screen Cover - Metal
HHBWUC
Navigate End of Run Screen - Fabric
HHBFCC
312
May 2017
Navigate End Screen Gable - Metal
HHBECF
Navigate End of Run Screen - Fabric
HHBECFCH
Navigate Single-Sided Corridor Screen - HNBLSF
HHBEPP
Fabric
Navigate Single-Sided Corridor Screen - HNBLSS
121
May 2019
Solid
HNBFNA
Navigate 120 Mid Cover
HNBFNF
Navigate Single-Sided End Cover - Metal HNBCCEMS 225a
HNBWRN
122
May 2019
Navigate Single-Sided Mid Cover - Metal
HNBFNS
Product
Guide
Last
Code
No.
Updated
123
May 2019
HNBFNT
HNBWTN
HNBFCN
HNBEPM
HNBEPP
HNBCGMMT
HNBECF
124
Sep 2019
HNBFNZ
HNBWES
HNBWRS
221a
May 2019
HNBCDG
221b
May 2019
HNBCDS
221c
May 2019
HNBCDF
222a
Sep 2019
HNBCFG
222b
Sep 2019
HNBCFS
222c
Sep 2019
HNBCFF
223a
Sep 2019
HNBFCN
HNBCGEMN
HNBCGMMN
223b
Sep 2019
HNBFCN
HNBCGMSN
HNBCGESN
HNBCCEMN 223c
May 2019
HNBCCMMN
HNBCCSMN 223d
Aug 2019
HNBTEF
HNBCGSMN 223e
Sep 2019
HNBTEF
224
Sep 2019
HNBCCMMT 224a
May 2019
Sep 2019
PAGE 1 OF 2
Advertisement
Related Manuals for Teknion Navigate Series
Summary of Contents for Teknion Navigate Series
- Page 1 height-adjustable bench INDEX *Click on the desired Installation Guide to jump to the Guide By Section page. Product Guide Last Product Guide Last Product Guide Last Product Name Code Updated Product Name Code Updated Product Name Code Updated INSTALLATION SUPPORT DOCUMENTS Ceiling Feed 302a Jan 2017...
- Page 2 height-adjustable bench INDEX *Click on the desired Installation Guide to jump to the Guide By Section page. Product Guide Last Product Guide Last Product Guide Last Product Name Code Updated Product Name Code Updated Product Name Code Updated Navigate Single-Sided End Screen HNBCCSMS 225b Sep 2019 Center Electrical Grommet...
- Page 3 height-adjustable bench Sequence Guides Date: Sept 2018 Page No: 1 of 4 HAB_Typical 1: Pre-assemble Frame 2: Assemble Frame. Installation Guide Reference (101) Installation Guide Reference (101) 3a: Connect Frames together as required (HAB to HAB). 3b: Connect Frames together as required (HAB to Interpret). Installation Guide Reference (101) Installation Guide Reference (102)
- Page 4 height-adjustable bench Sequence Guides Date: Sept 2018 Page No: 2 of 4 HAB_Typical 4a: Install Connecting Bracket - Only if Mid Power Pole specified. 4b: Install Base Feed Middle Bracket - Only if Mid Base Feed Installation Guide Reference ( 302b ) specified.
- Page 5 height-adjustable bench Sequence Guides Date: Sept 2018 Page No: 3 of 4 HAB_Typical 6: Install Electrics inside of Cable Channel. 7: Install Cable Channel & Accessory Rail. Installation Guide Reference (Power Module/Harness 301a, Base Feed 301b ) Installation Guide Reference ( 203a or 203b ) 8: Install Power Feed.
- Page 6 height-adjustable bench Sequence Guides Date: Sept 2018 Page No: 4 of 4 HAB_Typical 10: Install Contol Boxes. 11: Install E-Chain. Installation Guide Reference ( 101 ) Installation Guide Reference ( 301c ) Note: Worksurface shown elevated for visual reference only. 12: Install Power Bar with Cable Tray &...
- Page 7 1 of 8 Description: STANDARD/EXTENDED RANGE FRAMES & WORKSURFACE HAB_101 Rev. No: 3 Livello Rectangular Worksurface (HABWRL), Livello Frame (HABFLV), Frame Link (HABFLF) NOTE: Frame Link is not included with the Frame. Must be ordered separately. For Customer Support please contact product.support@teknion.com...
- Page 8 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: May 2017 Page No: 2 of 8 Description: STANDARD/EXTENDED RANGE FRAMES & WORKSURFACE HAB_101 Rev. No: 3 Part and Product Identification B - Frame Link (HABFLF) x1 B2 - 1/4-20 X 5/8" Mach Screw, Quad, Truss A - Livello Rectangular Worksurface (HABWRL)x2 B1 - Frame Link (N09-5913) x2 (E01-1010) x8...
- Page 9 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: May 2017 Page No: 3 of 8 Description: STANDARD/EXTENDED RANGE FRAMES & WORKSURFACE HAB_101 INSTALL LEVELERS & ATTACH LEGS TO TOP CHANNEL Bracket NOTE: Make sure the circular cutouts on the Top Channel face the same side as the brackets welded on the Legs.
- Page 10 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: May 2017 Page No: 4 of 8 Description: STANDARD/EXTENDED RANGE FRAMES & WORKSURFACE HAB_101 ATTACH STRETCHER BAR TO LEGS STEP 2: Attach Stretcher Bars to Legs.
- Page 11 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: May 2017 Page No: 5 of 8 Description: STANDARD/EXTENDED RANGE FRAMES & WORKSURFACE HAB_101 ATTACH STRUTS TO LEGS STEP 3: Attach Struts to Legs.
- Page 12 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: May 2017 Page No: 6 of 8 Description: STANDARD/EXTENDED RANGE FRAMES & WORKSURFACE HAB_101 INSTALL FRAME LINK (NOT INCLUDED WITH FRAME - MUST ORDER SEPARATELY) NOTE: Level Both frames before attaching them to each other.
- Page 13 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: May 2017 Page No: 7 of 8 Description: STANDARD/EXTENDED RANGE FRAMES & WORKSURFACE HAB_101 PLACE CONTROL BOXES INSIDE OF CHANNELS INSTALL WORKSURFACES Top Channel Circular Cutout NOTE: Control Boxes are to remain lose inside of Top Channel STEP 5: Place Control Boxes inside of Top Channels &...
- Page 14 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: May 2017 Page No: 8 of 8 Description: STANDARD/EXTENDED RANGE FRAMES & WORKSURFACE HAB_101 SECURE DISPLAY SWITCHES IN PLACE Bracket - Display Switch STEP 7: Insert Bracket into slot at the back of Display Switch until it snaps in place. Attach Display Switches to Worksurface as shown, with the four #10x3/4" Pan Quad Screws provided (two per Display Switch).
- Page 15 E - 1/4-20X3/4" Mach. Screw Quad Truss (E01-2010) x2 IMPORTANT: The System Link is not intended to provide structural support to the Interpret Frame. The System Link MUST ONLY be installed to Complete Interpret Frames with End Legs. For Customer Support please contact product.support@teknion.com...
- Page 16 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACE Date: May 2017 Page No: 2 of 4 Description: SYSTEM LINK - HEIGHT-ADJUSTABLE BENCH (HAB) TO INTERPRET HAB_102 ATTACH TOP BRACKET TO INTERPRET FRAME PLACE BOTTOM BRACKET IN PLACE Center Beam Interpret Frame NOTE : DO NOT fully tighten Nuts...
- Page 17 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACE Date: May 2017 Page No: 3 of 4 Description: SYSTEM LINK - HEIGHT-ADJUSTABLE BENCH (HAB) TO INTERPRET HAB_102 ATTACH BOTTOM BRACKET TO HAB FRAME TIGHTEN BRACKET NUTS Stretcher Bar - HAB Frame NOTE: Make sure to level both Frames before tightening the...
- Page 18 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACE Date: May 2017 Page No: 4 of 4 Description: SYSTEM LINK - HEIGHT-ADJUSTABLE BENCH (HAB) TO INTERPRET HAB_102 ROUTE CABLES THROUGH SYSTEM LINK INSTALL FRAME LINK COVER Connects to Interpret OPTIONAL Connects to HAB Underside View...
- Page 19 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 1 of 10 Description: FRAME & WORKSURFACES ASSEMBLY HAB_111 Rev. No: 4 Part and Product Identification hiSpace Universal Frame (HHBFYS), hiSpace Rectangular Worksurface (HHBWRL) & Frame Grommet Cap (HHBFGC) Hispace Frame Reconfiguration Kit, End (HHBFRK1) x1 Hispace Frame Reconfiguration Kit, Mid...
- Page 20 C1 -Gable Frame Sub Assy Sub Assembly (N09-5359)x2 & Front (N09-5358) x2 Covers (A16-3590)x4 D11 -M6X16mm Hex Socket D2 -Worksurface Channel D8 -Based on Teknion Quebec Button Hd Screw Zn Assy Hispace part E01-50702: M6 X 1 X (E01-0967)x16 (N09-5814-X)x2 14mm (E01-0602)x8...
- Page 21 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 3 of 10 Description: ASSEMBLE END GABLES HAB_111 REMOVE END GABLES INNER COVER INSTALL END GABLES TOP PLATE Mid Vertical Tube NOTE: End Gables are shipped assembled, except for Top Plate.
- Page 22 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 4 of 10 Description: ASSEMBLE MID GABLES - IF SPECIFIED HAB_111 REMOVE MID GABLE TOP COVERS INSTALL MID GABLE TOP PLATES IMPORTANT: If Mid Gables are not specified, skip steps 3 to 5 NOTE: Mid Gable is shipped assembled,...
- Page 23 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 5 of 10 Description: ASSEMBLE END & MID GABLES HAB_111 LOOSEN THE SET SCREWS FROM GABLES INSERT & SECURE LEGS INTO GABLES NOTE: Before installing legs, ensure the set screws on the gables are removed Gable to prevent scratches.
- Page 24 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 6 of 10 Description: FRAME ASSEMBLY HAB_111 DETERMINE GABLES PROPER LOCATION INSTALL WORKSURFACE CHANNELS STEP 9: Place Worksurface Channels on top of Legs. Make sure the holes align and fasten as shown, using four screws per leg.
- Page 25 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 7 of 10 Description: ASSEMBLE END & MID GABLES HAB_111 TIGHTEN GABLES SET SCREW REINSTALL COVERS BACK Legs & Cable Tray not End Gables shown for better visibility NOTE: Remove the covers if needed.
- Page 26 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 8 of 10 Description: FRAMES & WORKSURFACES HAB_111 INSTALL CONTROL BOX DETAIL Underside View NOTE: Electrical Power Plug should be installed facing the location of the power box. Support Plate - Worksurface Channel...
- Page 27 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 9 of 10 Description: FRAMES & WORKSURFACES HAB_111 INSTALL WORKSURFACES Underside View Note: Gables, Cable Tray and Control Box Cable connections not shown STEP 14: Bring Worksurfaces on top of Hispace Frame. Align Worksurface holes with Worksurface Angle holes, Worksurface Channel and Control Box. Fasten worksurfaces in place, as shown.
- Page 28 height-adjustable bench Installation Guides Section: FRAMES & WORKSURFACES Date: July 2017 Page No: 10 of 10 Description: FRAMES & WORKSURFACES HAB_111 INSTALL SWITCHES INSTALL GROMMETS - IF SPECIFIED Underside View Underside View STEP 15: Align Swithches & Worksurfaces holes. Fasten Switches to Worksurface with screws STEP 16: When specified, insert Bottom part of Rectangular Grommet into Worksurface cut provided.
- Page 29 height - adjustable bench Installation Guides Date: May 2019 Page: 1 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 Rev. 00 Navigate 120 Frame, Navigate 120 Worksurface, and Navigate Power Pole...
- Page 30 height - adjustable bench Installation Guides Date: May 2019 Page: 2 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVIGATE 120 FRAME (HNBFNT) NAVIGATE 120 HAB MID GABLE N09-8966...
- Page 31 height - adjustable bench Installation Guides Date: May 2019 Page: 3 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION NUMBER QTY. NUMBER NAVIGATE STRUT (55DPF1C00012016) A25-0630\23 N09-5600 ALU CAST 23 MEMORY, LVWR7...
- Page 32 height - adjustable bench Installation Guides Date: May 2019 Page: 4 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER (550105) 3/16” MOTOR WIRE CLAMP, CABLE PVC N09-8402\05 1.14.5...
- Page 33 height - adjustable bench Installation Guides Date: May 2019 Page: 5 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 3. CABLE ORGANIZER, WITH FELT COVER - YEYA01 (OPTIONAL) (720025) WD SCREW 1.14.12 PAN QUAD #8x5/8"...
- Page 34 height - adjustable bench Installation Guides Date: May 2019 Page: 6 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 7. NAVIGATE 120 MID GABLE - HNBCGMST (OPTIONAL) YEPD2A Bracket PB03-E007-01 TOP COVER MID...
- Page 35 height - adjustable bench Installation Guides Date: May 2019 Page: 7 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 8. NAVIGATE 120 POWER POLE - HNBEPP (OPTIONAL) #10-16 X 7/16 PAN FS10-16X7- HEAD-QUADREX...
- Page 36 height - adjustable bench Installation Guides Date: May 2019 Page: 8 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER 8.13 CEILING PLATE MPA15-2666 CABLE CHANNEL COVER PLATE - A16-3220...
- Page 37 height - adjustable bench Installation Guides Date: May 2019 Page: 9 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 LEVELLER ADJUSTMENT - 1 LEVELLER ADJUSTMENT - 2 STEP 1: Adjust the leveller to have 0.5" gap STEP 2: Adjust the leveller to have 0.5" gap...
- Page 38 height - adjustable bench Installation Guides Date: May 2019 Page: 10 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ASSEMBLE LEG AND MID GABLE STRETCHER ATTACH POWER POLE MOUNT (OPTIONAL) 1.14.3 STEP 3: Assemble Legs and Mid Gable Stretcher as shown above. STEP 4: Attach Power Pole Mount as shown above with Screws ans Washers provided.
- Page 39 height - adjustable bench Installation Guides Date: May 2019 Page: 11 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ATTACH GABLE SIDE COVER (OPTIONAL) PLACE TOP COVER (OPTIONAL) STEP 5: Assemble Legs and Gable Side Cover as shown above. STEP 6: Place Top Cover as shown above.
- Page 40 height - adjustable bench Installation Guides Date: May 2019 Page: 12 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 PLACE LOWER POLE BODY (OPTIONAL) FASTEN LOWER POLE BODY (OPTIONAL) STEP 7a: Place Lower Pole Body as shown above. STEP 7b: Fasten Lower Pole Body to Power Pole Mount with Screws provided.
- Page 41 height - adjustable bench Installation Guides Date: May 2019 Page: 13 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 PLACE UPPER POLE BODY (OPTIONAL) FASTEN UPPER POLE BODY (OPTIONAL) STEP 8: Place Upper Pole Body as shown above. STEP 9: Fasten Upper Pole Body with Bracket and Screws provided.
- Page 42 height - adjustable bench Installation Guides Date: May 2019 Page: 14 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 CEILING FEED - 1 (OPTIONAL) CEILING FEED - 2 (OPTIONAL) STEP 10: Place Ceiling Feed Cable through cut-out in the Pole Body. Slide Junction Box STEP 11: Put Feed Outlet in the 120 Gable.
- Page 43 height - adjustable bench Installation Guides Date: May 2019 Page: 15 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ATTACH LOWER POLE COVER (OPTIONAL) ATTACH UPPER POLE COVER (OPTIONAL) 8.12 8.11 STEP 12: Assemble Lower Pole Cover as shown above. STEP 13: Assemble Upper Pole Cover as shown above.
- Page 44 height - adjustable bench Installation Guides Date: May 2019 Page: 16 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ASSEMBLE CEILING PLATES (OPTIONAL) FASTEN HARDWARE (OPTIONAL) 8.13 STEP 14: Assemble Ceiling Plates as shown above. STEP 15: Attach T-Nut then, fasten Screws and attach cap as shown above.
- Page 45 height - adjustable bench Installation Guides Date: May 2019 Page: 17 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ASSEMBLE CENTRE LEG TOP MOUNT 1.14.2 STEP 15: Assemble Centre Top Mount with screws provided.
- Page 46 height - adjustable bench Installation Guides Date: May 2019 Page: 18 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 PLACE CROSS BEAM STEP 16: Place cross beam as shown above.
- Page 47 height - adjustable bench Installation Guides Date: May 2019 Page: 19 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 FASTEN SCREWS ON CROSS BEAM 1.14.9 STEP 17: Fasten cross beam with screws provided.
- Page 48 height - adjustable bench Installation Guides Date: May 2019 Page: 20 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 PLACE LEG ASSEMBLIES STEP 18: Place Leg Assembly as shown above.
- Page 49 height - adjustable bench Installation Guides Date: May 2019 Page: 21 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 FASTEN SCREWS 1.14.2 STEP 19: Fasten Leg Assembly with screws provided.
- Page 50 height - adjustable bench Installation Guides Date: May 2019 Page: 22 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 PLACE STRETCHER WELDMENT STEP 20: Place Stretcher Weldment as shown above.
- Page 51 height - adjustable bench Installation Guides Date: May 2019 Page: 23 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ATTACH STRETCHER WELDMENT 1.14.3 STEP 21: Assemble Stretcher Weldment with screws provided.
- Page 52 height - adjustable bench Installation Guides Date: May 2019 Page: 24 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ATTACH STRUTS 1.14.2 STEP 22: Attach Struts with screws provided.
- Page 53 height - adjustable bench Installation Guides Date: May 2019 Page: 25 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ATTATCH STRUT COVERS 1.14.4 STEP 23: Attach Strut Cover with screws provided as shown.
- Page 54 height - adjustable bench Installation Guides Date: May 2019 Page: 26 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 REMOVE SUPPORT BRACKETS STEP 24: Remove Support Brackets from the Cable Channel as Shown.
- Page 55 height - adjustable bench height - adjustable bench Installation Guides Installation Guides Date: May 2019 Date: May 2019 Page: 27 of 39 Page: 27 of 39 Section: Section: FRAMES AND WORKSURFACES / ELECTRICS FRAMES AND WORKSURFACES / ELECTRICS HAB_123 HAB_123 INSTALL ELECTRICS NOTE: Refer to Install Guide NOTE: Refer to Install Guide HAB_321b for...
- Page 56 height - adjustable bench Installation Guides Date: May 2019 Page: 28 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ATTACH SUPPORT BRACKET ATTACH & SECURE WIRE CHANNEL NOTE: Legs of the Frame are Hidden for Illustration Purpose. NOTE: Legs of the Frame are Hidden for Illustration Purpose. STEP 26: Insert Support Bracket through the Cut-Out and fasten the Brackets as Shown.
- Page 57 height - adjustable bench Installation Guides Date: May 2019 Page: 29 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 REMOVE COVER PLATE - 1 REMOVE COVER PLATE - 2 STEP 28: Remove Screws from Cable Channel Cover Plate STEP 29: Remove the Cable Channel Cover Plate to Install the Wire Manager E-Chain.
- Page 58 height - adjustable bench Installation Guides Date: May 2019 Page: 30 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 ATTACH CIELING FEED - 1 ATTACH CIELING FEED - 2 NOTE: The wire from E- chain is hidden for Illustration Purpose. STEP 30: Pull the Cieling Feed through the Mid-Gable Cut-Out.
- Page 59 height - adjustable bench Installation Guides Date: May 2019 Page: 31 of 39 FRAMES AND WORKSURFACES / ELECTRICS Section: HAB_123 POWER MODULE (OPTIONAL) POWER MODULE COVER (OPTIONAL) 1.14.15 1.14.15 STEP 32a: Attach Power Module as shown above STEP 32b: Attach Power Module Cover as shown above...
- Page 60 height - adjustable bench Installation Guides Date: May 2019 Page: 32 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 WIRE CONNECTION NOTE: Wire Channel is hidden for Illustration Purpose 1.13 1.14.9 1.11 1.12 STEP 33: Connect all the wires as shown above...
- Page 61 height - adjustable bench Installation Guides Date: May 2019 Page: 33 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 WORKSURFACE AND SWITCH - 1 1.14.13 1.14.1 STEP 34: Place Worksurface on the Frame Assembly and fasten with screws provided. Place the switch under the Worksurface and fasten with screws provided.
- Page 62 height - adjustable bench Installation Guides Date: May 2019 Page: 34 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 WORKSURFACE AND SWITCH - 2 NOTE: Align the edges of Worksurfaces and the top surfaces STEP 27: Place Worksurface on the frame and align side edges and top surfaces with other Worksurfaces. Then, assemble remainging Worksurfaces...
- Page 63 height - adjustable bench Installation Guides Date: May 2019 Page: 35 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 WORKSURFACE AND SWITCH - 3 1.14.14 STEP 28: Fasten Worksurface with the Frame Assembly.
- Page 64 height - adjustable bench Installation Guides Date: May 2019 Page: 36 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 CONTROL BOX COVER - 1 1.14.6 1.10 STEP 29: Fasten screws to the Control Modules as shown. Then, attach Control Box Cover.
- Page 65 height - adjustable bench Installation Guides Date: May 2019 Page: 37 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 CONTROL BOX COVER - 2 1.13 STEP 30: Attach Control Box Cover.
- Page 66 height - adjustable bench Installation Guides Date: May 2019 Page: 38 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 MOUNT MOUNTING BRACKET WIRE MANAGEMENT STEP 31: Attach Mounting Bracket as shown above. STEP 32: Organize cords and wires.
- Page 67 height - adjustable bench Installation Guides Date: May 2019 Page: 39 of 39 Section: FRAMES AND WORKSURFACES / ELECTRICS HAB_123 PLACE FELT COVER ROTATE SCREW LOCKS STEP 33: Place the Felt Cover with Screw Locks provided STEP 34: Rotate Screw Locks clock-wise to fasten in place...
- Page 68 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 15 Section: FRAMES AND WORKSURFACES HAB_124 Rev. 0 Navigate Single-Sided Frame (HNBFNZ), Navigate Single-Sided Rectangular Extended Worksurface (HNBWES) 1.11...
- Page 69 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 15 Section: FRAMES AND WORKSURFACES HAB_124 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVIGATE SINGLE-SIDED FRAME (HNBFNZ) SINGLE SIDE BENCH N09-8573L REAR LEG ASSY.
- Page 70 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 15 Section: FRAMES AND WORKSURFACES HAB_124 Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER M5 X 0.8 -10, FLAT 1.13.4 HEAD CAP E01-0989 SCREW (680214) COUNTER...
- Page 71 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 15 Section: FRAMES AND WORKSURFACES HAB_124 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 2. ELECTRICS MEMORY POWER BAR N09-8157 N09-5600 SWITCH POWER BAR B02-0736 HOLE COVER...
- Page 72 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 15 Section: FRAMES AND WORKSURFACES HAB_124 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 3. FELT COVER CABLE ORGANIZER (YEYA) 5. NAVIGATE SINGLE SIDED WORKSURFACE SMALL CABLE ORGANIZER N09-9012...
- Page 73 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 15 Section: FRAMES AND WORKSURFACES HAB_124 ATTACH LEGS TO CROSS BEAM FASTEN LEGS TO CROSS BEAM 1.13.2 STEP 1: Attach Leg Assembly to Cross Beam as shown above. STEP 2: Fasten Leg Assembly to the Cross Beam with screws provided.
- Page 74 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 15 Section: FRAMES AND WORKSURFACES HAB_124 ASSEMBLE STRUT ATTACH STRUT COVERS 1.13.4 1.13.2 STEP 3: Attach Struts as shown above with screws provided. STEP 4: Attach Strut Covers with screws provided.
- Page 75 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 15 Section: FRAMES AND WORKSURFACES HAB_124 ASSEMBLE STRETCHER REMOVE COVER FROM LEG 1.13.3 STEP 5: Attach Stretcher to Frame as shown above. STEP 6: Remove covers from Counterbalance Legs.
- Page 76 height-adjustable bench Installation Guides Date: Sept 2019 Page: 9 of 15 Section: FRAMES AND WORKSURFACES HAB_124 ADD WEIGHTS TO COUNTERBALANCE ATTACH STRETCHER BARS 1.10 STEP 7: Place Counterweights inside Counterbalance Leg. STEP 8: Attach Stretcher Bars to Legs...
- Page 77 height-adjustable bench Installation Guides Date: Sept 2019 Page: 10 of 15 Section: FRAMES AND WORKSURFACES HAB_124 POWER BAR (OPTIONAL) POWER BAR COVER (OPTIONAL) STEP 9a: Attach Power Bar as shown above. STEP 9b: Attach Power Bar Cover as shown above.
- Page 78 height-adjustable bench Installation Guides Date: Sept 2019 Page: 11 of 15 Section: FRAMES AND WORKSURFACES HAB_124 WIRE CONNECTION 1.12 1.13 STEP 10: Connect all the wires as shown above.
- Page 79 height-adjustable bench Installation Guides Date: Sept 2019 Page: 12 of 15 Section: FRAMES AND WORKSURFACES HAB_124 ATTACH WORKSURFACE TO THE FRAME 1.1.14.1 1.13.12 STEP 11: Place Worksurface on the Frame Assembly and fasten with screws provided. Attach the Switch under the Worksurface and fasten with screws.
- Page 80 height-adjustable bench Installation Guides Date: Sept 2019 Page: 13 of 15 Section: FRAMES AND WORKSURFACES HAB_124 ATTACH CONTROL BOX COVER 1.13.8 1.11 STEP 12: Fasten screws to the Control Module as shown above. Then, attach Control Box Cover.
- Page 81 height-adjustable bench Installation Guides Date: Sept 2019 Page: 14 of 15 Section: FRAMES AND WORKSURFACES HAB_124 ATTACH CABLE CLAMPS Rear View Front View 1.13.6 1.13.5 1.13.7 1.13.7 STEP 13: Using Wire/Cable Clips and screws, organize wires as shown above.
- Page 82 height-adjustable bench Installation Guides Date: Sept 2019 Page: 15 of 15 Section: FRAMES AND WORKSURFACES HAB_124 CABLE ORGANIZER (OPTIONAL) PLASTIC TRAY CABLE MANAGEMENT (OPTIONAL) NOTE: Refer to COM_151b for Plastic Tray Cable Management NOTE: Refer to COM_151a for Cable Organizer installation STEP 14a: Refer to COM_151a for Cable Organizer STEP 14b: Refer to COM_151b for Dual Plastic Tray Cable Management...
- Page 83 D6 -Set Screw Casual Screen 1/4-20 X1/4 (A25-0395) x1 Hex Socket NOTE: Fixed Center Black Flat Screen (HABCFG7251) Point shown as an example. (E01-0760) x3 D3 -Spacer, Wood D7 -Mounting Casual Screen (A25-0396) x2 (A25-0386) x1 For Customer Support please contact product.support@teknion.com...
- Page 84 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 7 Description: FIXED CENTER SCREEN - 10 mm GLASS HAB_201a INSERT CLAMP INTO CENTER RAIL CLAMP LOCATIONS Center FRONT VIEW Rail EQ=Equally Spaced NOTE: Make sure to USE ALL THE CLAMPS PROVIDED and space them as indicated on 3 Clamps - Length 48"...
- Page 85 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 7 Description: FIXED CENTER SCREEN - 10 mm GLASS HAB_201a LOCK CLAMPS STEP 2: Insert Springs into the the Clamps slots. Use Allen Key to rotate Mounting Nuts and lock Clamps into Center Rail.
- Page 86 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 4 of 7 Description: FIXED CENTER SCREEN - 10 mm GLASS HAB_201a INSTALL END CAPS STEP 3: Insert both End Caps into Clamps.
- Page 87 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 5 of 7 Description: FIXED CENTER SCREEN - 10 mm GLASS HAB_201a INSERT RUBBER PADS AND GLASS SCREEN INSERT SPACERS Side View STEP 4: Insert Rubber pads and Glass Screen into Clamps, as shown. STEP 5: Insert spacers as shown, on one side first, in between Rubber Pads and Clamps.
- Page 88 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 6 of 7 Description: FIXED CENTER SCREEN - 10 mm GLASS HAB_201a LOCK IN PLACE & LEVEL GLASS Opposite Side Secure Glass NOTE: Tighten Set Screws on both sides at the same time to make sure Glass is located in the center of Clamps.
- Page 89 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 7 of 7 Description: FIXED CENTER SCREEN - 10 mm GLASS HAB_201a INSTALL BOTTOM COVERS Spring Clamp & Bottom Cover Section View STEP 7: Mount Bottom Covers on both sides of Clamps. NOTE: Make sure Covers click on the springs.
- Page 90 D5 -Set Screw 1/4-20 X1/4 Hex Socket D2 -Spacer, Wood Black Flat Point Casual Screen (E01-0760) x1 (A25-0396) x2 NOTE: Fixed Center Screen (HABCFS7251) D6 -Mounting Nut shown as an example. (A25-0386) x1 D3 -Spring (A09-0032) x2 For Customer Support please contact product.support@teknion.com...
- Page 91 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 7 Description: FIXED CENTER SCREEN - SOLID HAB_201b INSERT CLAMP INTO CENTER RAIL CLAMP LOCATIONS Center SIDE VIEW NOTE: Make sure to USE ALL Rail THE CLAMPS PROVIDED and space them as indicated on these drawings.
- Page 92 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 7 Description: FIXED CENTER SCREEN - SOLID HAB_201b LOCK CLAMPS STEP 2: Insert Springs into the the Clamps slots. Use Allen Key to rotate Mounting Nuts and lock Clamps into Center Rail.
- Page 93 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 4 of 7 Description: FIXED CENTER SCREEN - SOLID HAB_201b INSTALL END CAPS Spring STEP 3: Insert both End Caps into Clamps.
- Page 94 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 5 of 7 Description: FIXED CENTER SCREEN - SOLID HAB_201b INSERT SPACERS INTO ONE SIDE AND SOLID SCREEN INTO CLAMPS DETAIL CROSS SECTION VIEW STEP 4: Insert Spacers into Clamps on the side with one hole for set of screws. Insert Screen panel into Clamps. NOTE: Make sure to insert spacers into one side of clamps only.
- Page 95 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 6 of 7 Description: FIXED CENTER SCREEN - SOLID HAB_201b INSERT REMAINING SPACERS SECURE SCREEN IN PLACE Secure Screen STEP 5: Insert remaining spacers into the clamp side with two holes for set of screws. STEP 6: Tighten Set Screws to secure Solid Screen in place.
- Page 96 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 7 of 7 Description: FIXED CENTER SCREEN - SOLID HAB_201b INSTALL BOTTOM COVERS Spring Clamp & Bottom Cover Section View STEP 7: Mount Bottom Covers on both sides of Clamps. NOTE: Make sure Covers click on the springs.
- Page 97 (A18-0251) x2 A1b - Mounting Nut (A25-0386) x2 A1c - Support Bracket - Fabric Screen (A16-3499) x2 A1d - Bushing - Fabric Screen (B02-0469) x2 A1e - #8x0.75" Quadrex Flat Head Screw For Customer Support please contact (E01-0947) x4 product.support@teknion.com...
- Page 98 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 5 Description: FIXED CENTER SCREEN - FABRIC HAB_201c SUPPORT BRACKET ASSEMBLY ATTACH SUPPORT BRACKETS STEP 1: Attach Mounting Pin, Support Bracket and Bushing as shown. INSERT ALLEN KEY Detail View STEP 2: Insert Allen Key through the hole on Mounting Pin.
- Page 99 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 5 Description: FIXED CENTER SCREEN - FABRIC HAB_201c ATTACH SCREEN TIGHTEN MOUNTING NUTS Top View Top View STEP 4: Rotate Mounting Nuts parallel with the Center Rail Channel, then attach Fabric Screen STEP 5: Rotate Allen Key to tighten Mounting Nuts and make sure it positioned as shown in into the Center Rail Channel.
- Page 100 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 4 of 5 Description: FIXED CENTER SCREEN - FABRIC HAB_201c REMOVE ALLEN KEYS Detail View STEP 6: Remove Allen Keys.
- Page 101 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 5 of 5 Description: FIXED CENTER SCREEN - FABRIC HAB_201c PRESS SCREEN SECURE SCREEN Detail View STEP 7: Press Fabric Screen down and make sure Screen Frame secured with Bushing. STEP 8: Fasten Support Brackets with Fabric Screen with Screws provided.
- Page 102 1/4-20x1-1/8" Long, Flat, Quadrex, Zinc (E01-0906) 48"-54" x3 60"-66" x4 72"-96" x5 B4 - #10x1", Pan, Quadrex Wood Screw, Deep Thread, Zink (E07-0097) 48" x10 54"-60" x14 For Customer Support please contact 66"-72" x18 product.support@teknion.com 78"-84" x22 90" x26 96" x30...
- Page 103 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 3 Description: DESK EDGE SCREEN - SOLID HAB_202a SCREEN MOUNTING KIT ASSEMBLY MARK CENTERLINE Underside View STEP 1: Fasten Screen Bar-Subassembly and Mounting Bracket to the Solid Screen. STEP 2: Mark the center on the bottom of the Worksurface with pencil as shown.
- Page 104 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 3 Description: DESK EDGE SCREEN - SOLID HAB_202a ATTACH & ALIGN SCREEN SECURE SCREEN Underside View Detail View Underside View Detail View STEP 3: Attach Mounting Bracket to the back of the Worksurface. Make sure the cut out of the STEP 4: Fasten Mounting Bracket to the underside of the Worksurface as shown.
- Page 105 72"-96" x5 B4 - 1/4-20x3/4" Machine Screw, Flat (E01-0484) 48"-54" x3 60"-66" x4 72"-96" x5 B5 - #10x1", Pan, Quadrex Wood Screw, Deep Thread, Zink For Customer Support please contact (E07-0097) 48" x10 product.support@teknion.com 54"-60" x14 66"-72" x18 78"-84" x22...
- Page 106 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 3 Description: DESK EDGE SCREEN - 6mm GLASS HAB_202b SCREEN MOUNTING KIT ASSEMBLY MARK CENTERLINE Underside View STEP 1: Fasten Screen Bar-Subassembly and Mounting Bracket to the 6mm Glass Screen. STEP 2: Mark Centerline at the bottom of the Worksurface with pencil as shown.
- Page 107 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 3 Description: DESK EDGE SCREEN - 6mm GLASS HAB_202b ATTACH & ALIGN SCREEN SECURE SCREEN Underside View Detail View Detail View Underside View STEP 3: Attach Mounting Bracket to the back of the Worksurface. Make sure the cut out of the STEP 4: Fasten Mounting Bracket to the underside of the Worksurface as shown.
- Page 108 72"-96" x5 B4 - 1/4-20x3/4" Machine Screw, Flat (E03-0723) 48"-54" x3 60"-66" x4 72"-96" x5 B5 - #10x1", Pan, Quadrex Wood Screw, Deep Thread, Zink For Customer Support please contact (E07-0097) 48" x10 product.support@teknion.com 54"-60" x14 66"-72" x18 78"-84" x22...
- Page 109 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 3 Description: DESK EDGE SCREEN - 10mm GLASS HAB_202c SCREEN MOUNTING KIT ASSEMBLY MARK CENTERLINE Underside View STEP 1: Fasten Screen Bar-Subassembly and Mounting Bracket to the 6mm Glass Screen. STEP 2: Mark the center on the bottom of the Worksurface with pencil as shown.
- Page 110 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 3 Description: DESK EDGE SCREEN - 10mm GLASS HAB_202c ATTACH & ALIGN SCREEN SECURE SCREEN Underside View Detail View Detail View Underside View STEP 3: Attach Mounting Bracket to the back of the Worksurface. Make sure the cut out of the STEP 4: Fasten Mounting Bracket to the underside of the Worksurface as shown.
- Page 111 Rectangular Grommet CAN NOT be installed at center. Desk Edge Screen - Fabric (HABCDF1360) shown as an example. B4 - Slotted Washer, 1" OD x 3/8 ID x1/16 THK, Zinc For Customer Support please contact (E03-0640) 48" x2 product.support@teknion.com 54"-84" x3...
- Page 112 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 4 Description: DESK EDGE SCREEN - FABRIC HAB_202d SCREEN MOUNTING KIT ASSEMBLY INSERT WASHER & TIGHTEN BRACKET Side View STEP 1: Fasten Screen Bar-Subassembly and Mounting Bracket to the Solid Screen loosely. STEP 2: Insert Slotted Washers to Screws between Bracket and Fabric Frame.
- Page 113 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 4 Description: DESK EDGE SCREEN - FABRIC HAB_202d MARK CENTER ATTACH & ALIGN SCREEN Underside View Detail View Underside View STEP 3: Mark the center on the bottom of Worksurface with pencil. STEP 4: Attach Mounting Bracket to the back of the Worksurface.
- Page 114 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 4 of 4 Description: DESK EDGE SCREEN - FABRIC HAB_202d SECURE SCREEN Underside View Detail View STEP 5: Fasten Mounting Bracket to the underside of the Worksurface as shown. NOTE: Fasten Screws to outer pilot holes.
- Page 115 (N09-5185) x2 & Top Cover for Metal Mid or (N09-5186) x2 Gable w/Power Pole (A16-3086) x1 C2 - Front Cover Assembly Mid Gable C4b - Top Cover for Metal Mid For Customer Support please contact (N09-5182) x2 Gable (A16-3025) x2 product.support@teknion.com...
- Page 116 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a REMOVE SUPPORT BRACKETS & COMMUNICATION PLATE COVER STEP 1: Remove Support Brackets and Communication Plate Cover as shown.
- Page 117 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a APPLY FOAM RUBBERS ATTACH SUPPORT BRACKET STEP 2: Attach Foam Rubbers onto the center of the Table Legs' inner side. STEP 3: Insert Support Bracket through the cut-out on the Inside Cover Assembly as shown.
- Page 118 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 4 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a LOOSEN LEGS HEX BOLT MOUNT INSIDE COVER Leveler Leg Hex Bolt STEP 4: Loosen Legs Hex Bolt to allow enough room for Gable Connecting Plate. Strretcher Bar ATTACH CONNECTING PLATES TO FRAME LEGS STEP 5: Fasten Gable Connecting Plates to Frame Legs.
- Page 119 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 5 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a FASTEN INSIDE COVER IN PLACE SECURE INSIDE COVER ASSEMBLY TO FRAME Opposite Side STEP 7: Make sure the face of the Inside Cover Assembly is flush with the Leg. Secure Inside STEP 8: Secure Inside Cover Assembly to Stretcher Bar with Bolts.
- Page 120 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 6 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a MOUNT OUTSIDE COVER ASSEMBLY Opposite Side STEP 9: Mount Outside Cover Assembly to the highlighted part of the Inside Cover Assembly as shown. STEP 9: Mount Outside Cover Assembly to the highlighted part of the Inside Cover Assembly as shown.
- Page 121 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 7 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a MID POWER POLE SUPPORT PLATE (OPTIONAL) ATTACH SUPPORT BRACKET NOTE: Please refer to installation guide HAB_302b for detail. Connecting Bracket Hex Bolt 5/16-18x1"...
- Page 122 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 8 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a SCREENS AND GABLES SECURE SIDE COVER ASSEMBLY NOTE: Please refer to Specification Drawing to mount the correct Side Cover Assembly.
- Page 123 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 9 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a CABLE CHANNEL ASSEMBLY Power Module Cover Standard Power Module E-Chain High Capacity Power Module Base Feed NOTE: Install Cable Channel Cover Plate(B9) on Cable Channel where E-Chain is not specified or unused location.
- Page 124 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 10 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a ATTACH CABLE CHANNEL & CENTER RAIL SECURE CABLE CHANNEL Underside View STEP 13: Align holes on Support Brackets, Cable Channel Assembly. Insert Bolts inside Center STEP 14: Secure Cable Channel in place with Nuts.
- Page 125 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 11 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a ATTACH SUPPORT BRACKET MOUNT SIDE COVER ASSEMBLY STEP 15: Insert Support Bracket through the cut-out on the Side Cover Assembly. STEP 16: Mount Side Cover Assembly onto the Stretcher Bar as shown.
- Page 126 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 12 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a SECURE SIDE COVER ASSEMBLY ATTACH MAGNET NOTE: Attach Magnets approximately to the locations to the Legs. STEP 17: Secure Side Cover Assembly with Stretcher Bar with Bolts. STEP 18: Attach Magnets to the inside of the Front Covers as shown.
- Page 127 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 13 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a MOUNT FRONT COVER ASSEMBLIES Opposite Side Detail View Detail View NOTE: Make sure Magnets are attached to the Legs. STEP 19: Mount Front Covers onto the Side Covers as shown in Detail View.
- Page 128 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 14 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a CABLE CHANNEL ASSEMBLY ATTACH TOP COVER Underside View STEP 20: Align holes on Support Brackets, Cable Channel Assembly. Insert Bolts inside Center STEP 21: Attach Top Covers onto the highlighted extrusions on the Side and Front Cover Rail Extrusion through Cable Channel Assembly and Brackets as shown.
- Page 129 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 15 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a TOP COVER w/POWER POLE CUTOUT (OPTIONAL) STEP 22: If Mid Gable Power Pole is specified. Attach Top Covers onto the highlighted extrusions on the Side and Front Cover Assemblies as shown. Repeat Step 1-14 to install End Gable and Cable Channel on another side of the Table.
- Page 130 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 16 of 16 Description: METAL GABLES & CABLE CHANNEL HAB_203a CENTER RAIL EXTRUSION CAP STEP 23: Insert Center Rail Extrusion Caps onto Center Rail Extrusions as shown.
- Page 131 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 1 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b Rev. No: 06 HAB End Gable-Solid (HABCGESL), HAB Cable Part and Product Identification Channel (HABFCC) & HAB Mid Gable-Solid (HABCGMSL) A1 - Inside Cover Assembly A2 - Cover for End Gable for Wood End Gable...
- Page 132 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 2 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b REMOVE SUPPORT BRACKETS AND COMMUNICATION PLATE COVER STEP 1: Remove Support Brackets and Communication Plate Cover as shown.
- Page 133 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 3 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b ATTACH SUPPORT BRACKET APPLY FOAM RUBBERS STEP 2: Fasten Brackets to Outside Cover Assembly. STEP 3: Insert Support Bracket through the cut-out on the Inside Cover Assembly as shown.
- Page 134 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 4 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b ATTACH CONNECTION PLATES TO FRAME LEGS Leveler Leg Hex Bolt Please refer to Installation Guide No. HAB_101a for information. STEP 4: Loosen Legs Hex Bolt to allow enough room for Gable Connecting Plate.
- Page 135 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 5 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b MOUNT INSIDE COVER ASSEMBLY Section View STEP 5: Mount Inside Cover Assembly onto Stretcher Bar. Make sure the face of the Inside Cover Assembly is flush with the Leg as shown in Section View. Secure Inside Cover Assembly to Gable Connecting Plate on both sides using Tap Quad Pan screws provided.
- Page 136 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 6 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b SECURE TO THE STRETCHER BAR Opposite Side STEP 6: Secure Inside Cover Assembly to Stretcher Bar with Bolts.
- Page 137 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 7 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b MOUNT OUTSIDE COVER ASSEMBLY Section View Section View STEP 7: Mount Outside Cover Assembly to the highlighted part of the Inside Cover Assembly as shown.
- Page 138 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 8 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b ATTACH CONNECTING PLATES TO FRAME LEGS Leveler Leg Hex Bolt STEP 8: Loosen Legs Hex Bolt to allow enough room for Gable Connecting Plate. Fasten Gable Connecting Plates to Frame Legs.
- Page 139 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 9 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b MOUNT BOTTOM ANGLE BAR STEP 9: Mount Bottom Angle Bar and secure to Gable Connecting Plate on both sides using Tap Quad Pan screws provided.
- Page 140 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 10 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b MID POWER POLE SUPPORT PLATE ATTACH SUPPORT BRACKET NOTE: Please refer to installation guide HAB_302b for detail. Connecting Bracket Hex Bolt 5/16-18x1"...
- Page 141 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 11 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b MOUNT SIDE COVER ASSEMBLY SECURE SIDE COVER ASSEMBLY NOTE: Side Cover with Base Feed Cut-out shown as an example. NOTE: Please refer to Specification Drawing to mount the correct Side...
- Page 142 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 12 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b CABLE CHAIN ASSEMBLY E-Chain NOTE: Electrics components have to Power Module installed on Cable Channel Cover before connecting to Support Bracket.
- Page 143 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 13 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b CABLE CHANNEL ASSEMBLY AND CENTER RAIL SECURE CABLE CHANNEL NOTE: Please repeat STEP 1 to 14 if second Cable Channel is specified .
- Page 144 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 14 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b MOUNT FRONT COVER ASSEMBLIES Section View STEP 15: Mount Front Covers onto the Frame Link and Bottom Connecting Brackets.
- Page 145 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 15 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b TOP COVER W/ POWER POLE CUTOUT (OPTIONAL) STEP 16a: If Mid Gable Power Pole is specified. Attach Top Covers onto the highlighted extrusions on the Side and Front Cover Assemblies as shown. Repeat Step 1-14 to install End Gable and Cable Channel on another side of the Table.
- Page 146 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: Aug 2017 Page No: 16 of 16 Description: SOLID GABLES & CABLE CHANNEL HAB_203b ATTACH TOP COVER CENTER RAIL EXTRUSION CAP STEP 16b: STEP 17: Rest Top Covers onto Gable structures as shown. Insert Center Rail Extrusion Caps onto Center Rail Extrusions as shown.
- Page 147 NOTE: Mid Cover with Cable Cutout shown as an example. For Cable Channel installation procedures, please refer to guide For Customer Support please contact For Customer Support please contact For Customer Support please contact HAB_203a or 203b product.support@teknion.com product.support@teknion.com product.support@teknion.com...
- Page 148 height-adjustable bench Installation Guides Section: SCREENS & GABLES Date: May 2017 Page No: 2 of 3 Description: MID & END COVER - METAL HAB_203c SLIDE SUPPORT BRACKET INTO END COVER SECURE END COVER IN PLACE Support Bracket - Ships with Cable Channel NOTE: End Cover with Cable Cutout shown as an example.
- Page 149 height-adjustable bench Installation Guides Section: SCREENS & GABLES Date: May 2017 Page No: 3 of 3 Description: MID & END COVER - METAL HAB_203c INSTALL METAL MID COVER NOTE: Mid Cover with Cable Cutout shown as an example. For Cable Channel installation procedures, please refer to guide HAB_203a or 203b Support Bracket...
- Page 150 height-adjustable bench Installation Guides Section: STUDY CARREL Date: Sept 2019 Page No: 1 of 4 Description: STUDY CARREL INSTALLATION HAB_204 Rev. No: 1 Study Carrel (GYKB) Part and Product Identification A - Screen Mounting Pin (A18-0251) x4 B - #10 x 0.875" Lg. Screw (E07-0077) x4 C - Mounting Bracket (N09-8285) x2...
- Page 151 height-adjustable bench Installation Guides Section: STUDY CARREL Date: Sept 2019 Page No: 2 of 4 Description: STUDY CARREL INSTALLATION HAB_204 SCREW MOUNTING PINS SLIDE BRACKET ONTO WORKSURFACE Worksurface STEP 1: Screw Screen Mounting Pin to Brackets STEP 2: Slide Brackets onto Worksurface...
- Page 152 height-adjustable bench Installation Guides Section: STUDY CARREL Date: Sept 2019 Page No: 3 of 4 Description: STUDY CARREL INSTALLATION HAB_204 ATTACH LONG EDGE SCREEN TO BRACKET REMOVE PLASTIC EXTRUSIONS Extrusions STEP 3: Slide Long Edge Screen onto Mounting Pins STEP 4: Remove plastic extrusions...
- Page 153 height-adjustable bench Installation Guides Section: STUDY CARREL Date: Sept 2019 Page No: 4 of 4 Description: STUDY CARREL INSTALLATION HAB_204 MOUNT AND ATTACH SIDE SCREENS SCREW BRACKET TO WORKSURFACE STEP 5: Slide Desk Edge Side Screen onto Mounting Pins and clip Desk Edge Side Screens STEP 6: Screw Bracket onto Worksurface into place to attach to Long Edge Screen...
- Page 154 B2 - 1/4-20 UNC x 0.500" 2A, Cross/ SQ. COMB. Socket, TRS. Head, Machine Screw, Steel, ZN (E01-0110) x4 B3 - Murakoshi Screw, 1/4-20x15mm (JCBB), Zinc (E01-0635) x8 B4 - Joint Connector Nuts; 1/4-20x17mm; (JN96035) (E03-0482) x8 For Customer Support please contact product.support@teknion.com...
- Page 155 height-adjustable bench Section: Date: May 2017 Page No: 2 of 3 Description: HAB_211a INSTALL MOUNTING BRACKETS ATTACH SCREEN STEP 1: Secure Mounting Brackets to Casual Screen with Murakoshi Screws and Joint Nuts. STEP 2: Fasten Mounting Brackets onto Cable Tray loosely.
- Page 156 height-adjustable bench Section: Date: May 2017 Page No: 3 of 3 Description: HAB_211a ADJUST & SECURE SCREEN STEP 3: Ensure Casual Screen is located at the center of the bench, then tighten Screws to secure it in place.
- Page 157 B1 - Support Bracket - Fabric Screen (A16-3492) x2 B2 - #8x1-1/4 Type AB Flat Quadrex Head Self Tapping Screw Steel ZP (E01-0947) x6 B3 - 1/4-20 UNC x0.500"2A, Cross/Square COMB. Socket, TRS Head, Machine Screw, Steel, ZN (E01-0110) x4 For Customer Support please contact product.support@teknion.com...
- Page 158 height-adjustable table Section: Date: May 2017 Page No: 2 of 4 Description: HAB_211b MOUNTING BRACKETS ASSEMBLY STEP 1: Secure Support Brackets to Fabric Screen.
- Page 159 height-adjustable table Section: Date: May 2017 Page No: 3 of 4 Description: HAB_211b FASTEN SCREEN (LOOSELY) Cable Tray STEP 2: Fasten Support Brackets onto Cable Tray with Screws. Make sure to keep Screws loose for adjustment.
- Page 160 height-adjustable table Section: Date: May 2017 Page No: 4 of 4 Description: HAB_211b ADJUST & SECURE SCREEN Top View Detail View STEP 3: Ensure Fabric Screen is located at the center of the Cable Tray, then tighten Screws to secure it in place.
- Page 161 Screw Deep Thread Zn (E07-0097) 48"x10 54"-60"x14 NOTE: If 48" & 54" Desk Edge Screen is 66"-72"x18 78"-84"x22 specified, Rectangular Grommet CAN NOT 90"x26 96"x30 be specified at center. Desk Edge Screen (HHBCDS1354) shown as an example. For Customer Support please contact product.support@teknion.com...
- Page 162 height-adjustable bench Section: Date: May 2017 Page No: 2 of 3 Description: HAB_212a SCREEN MOUNTING KIT ASSEMBLY ATTACH SCREEN TO WORKSURFACE STEP 1: Fasten Screen Bar-Subassembly and Mounting Bracket with Solid Screen. STEP 2: Attach Screen Mounting Bracket to the back of the Worksurface. NOTE: If 48"...
- Page 163 height-adjustable bench Section: Date: May 2017 Page No: 3 of 3 Description: HAB_212a SECURE SCREEN Underside View Pilot Hole Pilot Hole STEP 3: Locate and align the two Worksurface pilot holes shown above , with the two correspondent Mounting Bracket holes. Fasten Mounting Bracket to the underside of the Worksurface.
- Page 164 48" x2 54"-84" x3 B4 - #10x1" Pan Quad. Wood Screw Deep Thread Zn (E07-0097) x10 NOTE: If 48" & 54" Desk Edge Screen is specified, Rectangular Grommet CAN NOT be specified at center. For Customer Support please contact product.support@teknion.com...
- Page 165 height-adjustable bench Section: Date: May 2017 Page No: 2 of 3 Description: HAB_212b SCREEN MOUNTING KIT ASSEMBLY INSERT WASHER & TIGHTEN BRACKET STEP 1: Fasten Screen Bar-Subassembly and Mounting Bracket with the Fabric Screen STEP 2: Insert Slotted Washers to Screws between Bracket and Fabric Frame. Then Tighten loosely .
- Page 166 height-adjustable bench Section: Date: May 2017 Page No: 3 of 3 Description: HAB_212b ATTACH SCREEN TO WORKSURFACE SECURE SCREEN Underside View Pilot Hole Pilot Hole STEP 3: Attach Mounting Bracket to the back of the Worksurface. STEP 4: Locate and align the two Worksurface pilot holes shown above , with the two correspondent Mounting Bracket holes.
- Page 167 B5 - #10x1" Pan Quad. Wood Screw Deep Thread Zn (E07-0097) 48" x10 54"-60" x14 66"-72" x18 78"-84" x22 NOTE: If 48" & 54" Desk Edge Screen is specified, Rectangular Grommet CAN NOT be specified at center. For Customer Support please contact product.support@teknion.com...
- Page 168 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 2 of 3 Description: HISPACE - DESK EDGE SCREEN - GLASS HAB_212c SCREEN MOUNTING KIT ASSEMBLY ATTACH SCREEN TO WORKSURFACE STEP 1: Fasten Screen Bar-Subassembly and Mounting Bracket with 6mm Glass Screen. STEP 2: Attach Mounting Bracket to the back of the Worksurface.
- Page 169 height-adjustable bench Installation Guides Section: SCREENS AND GABLES Date: May 2017 Page No: 3 of 3 Description: HISPACE - DESK EDGE SCREEN - GLASS HAB_212c LOCATE PILOT HOLES & SECURE SCREEN Pilot Hole Pilot Hole STEP 3: Locate and align the two Worksurface pilot holes shown above , with the two correspondent Mounting Bracket holes. Fasten Mounting Bracket to the underside of the Worksurface.
- Page 170 height-adjustable bench Installation Guides Date: May 2019 Page: 1 of 4 Section: SCREENS AND GABLES HAB_221a Rev. 0 DESK EDGE SCREEN - GLASS (HNBCDG)
- Page 171 height-adjustable bench Installation Guides Date: May 2019 Page: 2 of 4 Section: SCREENS AND GABLES HAB_221a Part & Product Identification ITEM PART ILLUSTRATION DESCRIPTION QTY. NUMBER H01-1921-X 10mm CLEAR (CL) TEMPERED GLASS SCREEN, HAB 10mm FROST (FT) ETCHED TEMPERED GLASS SCREEN, H02-047-X H01-1868-X 6mm CLEAR (CL) TEMPERED GLASS SCREEN, HAB...
- Page 172 height-adjustable bench Installation Guides Date: May 2019 Page: 3 of 4 Section: SCREENS AND GABLES HAB_221a SCREEN MOUNTING KIT ASSEMBLY MARK CENTRELINE STEP 1: Fasten Screen Bar Subassembly and Mounting Bracket to the Glass Screen STEP 2: Mark Centreline at the bottom of the Worksurface with pencil as shown. NOTE: If 48"...
- Page 173 height-adjustable bench Installation Guides Date: May 2019 Page: 4 of 4 Section: SCREENS AND GABLES HAB_221a ATTACH & ALIGN SCREEN SECURE SCREEN Bottom View Detail View STEP 3: Attatch Mounting Bracket to the back of the Worksurface. Make sure the cut out of STEP 4: Fasten mounting Bracket to the underside of the Worksurface as shown.
- Page 174 height-adjustable bench Installation Guides Date: May 2019 Page: 1 of 4 Section: SCREENS AND GABLES HAB_221b Rev. 0 DESK EDGE SCREEN - SOLID (HNBCDS)
- Page 175 height-adjustable bench Installation Guides Date: May 2019 Page: 2 of 4 Section: SCREENS AND GABLES HAB_221b Part & Product Identification ITEM PART ILLUSTRATION DESCRIPTION QTY. NUMBER C05-8870-X DESK EDGE WOOD SCREEN, HAB X06-0339-X SOLID DESK EDGE SCREEN MOUNTING KIT, HAB A16-2959-X DESK EDGE SCREEN MOUNTING BRKT, HAB N09-5045-X...
- Page 176 height-adjustable bench Installation Guides Date: May 2019 Page: 3 of 4 Section: SCREENS AND GABLES HAB_221b SCREEN MOUNTING KIT ASSEMBLY MARK CENTRELINE STEP 1: Fasten Screen Bar Subassembly and Mounting Bracket to the Screen STEP 2: Mark Centreline at the bottom of the Worksurface with pencil as shown. NOTE: If 48"...
- Page 177 height-adjustable bench Installation Guides Date:May 2019 Page: 4 of 4 Section: SCREENS AND GABLES HAB_221b ATTACH & ALIGN SCREEN SECURE SCREEN STEP 3: Attatch Mounting Bracket to the back of the Worksurface. Make sure the cut out of STEP 4: Fasten mounting Bracket to the underside of the Worksurface as shown. he Bracket aligns with the marked Centreline.
- Page 178 height-adjustable bench Installation Guides Date: May 2019 Page: 1 of 6 Section: SCREENS AND GABLES HAB_221c Rev. 0 DESK EDGE SCREEN - FABRIC (HNBCDF)
- Page 179 height-adjustable bench Installation Guides Date: May 2019 Page: 2 of 6 Section: SCREENS AND GABLES HAB_221c Part & Product Identification ITEM PART ILLUSTRATION DESCRIPTION QTY. NUMBER N03-2735-X FABRIC DESK EDGE SCREEN SUB-ASSY - HAB X06-0338-X FABRIC DESK EDGE SCREEN MOUNTING KIT, HAB A16-2959-X DESK EDGE SCREEN MOUNTING BRKT, HAB 1/4-20 X 1"...
- Page 180 height-adjustable bench Installation Guides Date: May 2019 Page: 3 of 6 Section: SCREENS AND GABLES HAB_221c SCREEN MOUNTING KIT ASSEMBLY INSERT WASHER & TIGHTEN BRACKET Side View STEP 1: Fasten Screen Bar Subassembly and Mounting Bracket to the Screen looseley. STEP 2: Insert Slotted Washers to Screws between Bracket and Fabric Frame, then Tighten the Screws fully.
- Page 181 height-adjustable bench Installation Guides Date: May 2019 Page: 4 of 6 Section: SCREENS AND GABLES HAB_221c MARK CENTRELINE STEP 3: Mark Centreline at the bottom of the Worksurface with a pencil as shown.
- Page 182 height-adjustable bench Installation Guides Date: May 2019 Page: 5 of 6 Section: SCREENS AND GABLES HAB_221c ATTACH & ALIGN SCREEN SECURE SCREEN Detail View Detail View STEP 4: Attatch Mounting Bracket to the back of the Worksurface. Make sure the cut-out of STEP 5: Fasten mounting Bracket to the underside of the Worksurface as shown.
- Page 183 height-adjustable bench Installation Guides Date: May 2019 Page: 6 of 6 Section: SCREENS AND GABLES HAB_221c ATTACH SHIMS ATTACH SHIMS OPTIONAL OPTIONAL STEP 6a: Unmount the screen, attach Shims by the edge of the bracket as illustrated and STEP 6b: Unmount the screen and attach Shims on the screen's side of the bracket as reinstall Screen.
- Page 184 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 8 Section: SCREENS AND GABLES HAB_222a Rev. 01 Fixed Centre Screen - Glass (HNBCFG)
- Page 185 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 8 Section: SCREENS AND GABLES HAB_222a Part & Product Identification ITEM ILLUSTRATION PART NUMBER DESCRIPTION QTY. 10mm CLEAR (CL) TEMPERED GLASS, FULL STYLE, FIXED HEIGHT SCREEN, H01-1860-X 10mm FROST (FT) ETCHED TEMPERED GLASS, FULL STYLE, FIXED HEIGHT H02-0467-X SCREEN, HAB 2.
- Page 186 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 8 Section: SCREENS AND GABLES HAB_222a INSERT CLAMP INTO CENTRE RAIL CLAMP LOCATIONS EQ = Eually Spaced FRONT VIEW MAX 27" MAX 27" NOTE: Make sure to USE ALL THE CLAMPS PROVIDED and space them as indicated on these drawings.
- Page 187 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 8 Section: SCREENS AND GABLES HAB_222a INSERT SPRINGS LOCK CLAMP STEP 2: Insert Springs into the Clamps' slots. STEP 3: Use Allen Key to rotate Mounting Nuts and lock Clamps into Centre Rail.
- Page 188 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 8 Section: SCREENS AND GABLES HAB_222a INSTALL END CAPS INSERT RUBBER PADS AND SCREEN STEP 4: Insert both End Caps into Clamps STEP 5: Insert Rubber pads and Glass Screen into Clamps, as shown.
- Page 189 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 8 Section: SCREENS AND GABLES HAB_222a INSERT SPACERS SIDE VIEW STEP 6: Insert spacers as shwon, on one side first, in between the Rubber Pads and the Clamps. Insert remaining spacers on the other side...
- Page 190 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 8 Section: SCREENS AND GABLES HAB_222a LOCK IN PLACE & LEVEL SCREEN (SIDE 1) LOCK IN PLACE & LEVEL SCREEN (SIDE 2) Opposite Side STEP 7a: Tighten Set Screws on both sides at the same time to make sure the Glass is located STEP 7b: Tighten Set Screws on both sides at the same time to make sure the Glass is located in the centre of the Clamps.
- Page 191 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 8 Section: SCREENS AND GABLES HAB_222a INSTALL BOTTOM COVERS SIDE VIEW STEP 8: Mount Bottom Covers on both sides of Clamps. NOTE: Make sure Covers click on the springs.
- Page 192 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 7 Section: SCREENS AND GABLES HAB_222b Rev. 01 Fixed Centre Screen - Solid (HNBCFS)
- Page 193 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 7 Section: SCREENS AND GABLES HAB_222b Part & Product Identification PART ITEM NO. DESCRIPTION QTY. ILLUSTRATION NUMBER C05-8955-X WOOD PANEL, FULL STYLE, FIXED HEIGHT SCREEN, HAB 2. WOOD CLAMP SUB ASSY. (N09-3980) (SEE PAGE 3 FOR QTY) A25-0395 CLAMP, WOOD CASUAL SCREEN A25-0396...
- Page 194 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 7 Section: SCREENS AND GABLES HAB_222b INSERT CLAMP INTO CENTRE RAIL CLAMP LOCATIONS EQ = Eually Spaced FRONT VIEW 27" MAX 27" MAX NOTE: Make sure to use all the clamps provided and space them as indicated on these drawings.
- Page 195 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 7 Section: SCREENS AND GABLES HAB_222b INSERT SPRINGS LOCK CLAMP STEP 2: Insert Springs into the Clamps' slots. STEP 3: Use Alen Key to rotate Mounting Nuts and lock Clamps into Centre Rail.
- Page 196 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 7 Section: SCREENS AND GABLES HAB_222b INSTALL END CAPS FRONT SPACERS AND SCREEN STEP 4: Insert both End Caps into Clamps STEP 5: Insert front spacers and Screen into Clamps, as shown.
- Page 197 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 7 Section: SCREENS AND GABLES HAB_222b INSERT SPACERS SIDE VIEW STEP 6: Insert the remaining spacers spacers as shown on the remaining side.
- Page 198 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 7 Section: SCREENS AND GABLES HAB_222b SECURE SCREEN INSTALL BOTTOM COVERS STEP 7: Secure Screen by tightening Set Screws as shown. STEP 8: Mount Bottom Covers on both sides of Clamps. NOTE: Make sure Covers click as they are pushed into place.
- Page 199 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 6 Section: SCREENS AND GABLES HAB_222c Rev. 02 NAVIGATE FIXED CENTER SCREEN (HNBCFF)
- Page 200 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 6 Section: SCREENS AND GABLES HAB_222c Part & Product Identification ITEM NO. PREVIEW DESCRIPTION PART NUMBER QTY. HNB FIXED CENTRE SCREEN - FRAMED FABRIC HNBCFFXX MOUNTING KIT (X03-0283) SCREEN MOUNTING PIN A18-0251 BUSHING - FABRIC SCREEN B02-0469...
- Page 201 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 6 Section: SCREENS AND GABLES HAB_222c ASSEMBLE SUPPORT BRACKET INSERT ALLEN KEY STEP 1: Attach Mounting Pin, Support Bracket and Bushing as shown STEP 2: Insert Allen Key through the hole on the Mounting Pin...
- Page 202 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 6 Section: SCREENS AND GABLES HAB_222c ATTACH SUPPORT BRACKETS ATTACH SCREEN STEP 3: Insert Mounting Pin into the holes inside the Fabric Screen STEP 4: Rotate Mounting Nuts parallel with the Center Rail Channel, then attach Fabric Screen into the Center Rail Channel...
- Page 203 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 6 Section: SCREENS AND GABLES HAB_222c TIGHTEN MOUNTING NUTS REMOVE ALLEN KEYS STEP 5: Rotate Allen Key to tighten Mounting Nuts STEP 6: Remove Allen Keys...
- Page 204 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 6 Section: SCREENS AND GABLES HAB_222c PRESS DOWN ON SCREEN SECURE SCREEN STEP 7: Press Fabric Screen down and make sure Frame is secured with Bushing STEP 8: Fasten Support Brackets with Fabric Screen with Screws provided...
- Page 205 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a Rev. 01 Navigate End Gable - Metal (HNBCGEMN), Navigate Mid Gable - Metal (HNBCGMMN), Navigate Cable Channel (HNBFCN)
- Page 206 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION PREVIEW DESCRIPTION NUMBER NUMBER 1. Navigate Wire Channel (HNBFCN) x1 1/4-20X5/8" MACH SCR, E01-0113 CABLE BLACK,...
- Page 207 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER 3. Navigate Mid Gable - Metal (HNBCGMMN) x1 2.
- Page 208 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a REMOVE SUPPORT BRACKETS NOTE: Make sure the Bolts do not come out of the assembly. STEP 1: Remove Support Brackets.
- Page 209 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a APPLY FOAM RUBBERS ATTACH SUPPORT BRACKET STEP 2: Attach Foam Rubbers onto the centre of the Table Legs' inner side. STEP 3: Insert Support Bracket through the cut-out on the Inside Cover Assembly as shown.
- Page 210 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a ATTACH CONNECTING PLATES TO FRAME LEGS MOUNT INSIDE COVER NOTE: Parts of the Frames are hidden for Illustration Purpose. Stretcher STEP 4: Loosen Legs Hex Bolt on both Legs to allow enought clearance for gable connecting STEP 5: Mount Inside Cover Assembly onto Frame Stretcher Bar.
- Page 211 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a SECURE INSIDE COVER ASSEMBLY TO FRAME FASTEN INSIDE COVER IN PLACE STEP 6: Secure Inside Cover Assembly to Stretcher Bar with Bolts. STEP 7: Make sure the face of the Inside Cover Assembly is flush with the Leg.
- Page 212 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a MOUNT OUTSIDE COVER ASSEMBLY Opposite side view STEP 8:Mount Outside Cover Assembly to the highlighted part of the Inside Cover Assembly as shown.
- Page 213 height-adjustable bench Installation Guides Date: Sept 2019 Page: 9 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a MID POWER POLE SUPPORT PLATE (OPTIONAL) NOTE:Please refer to installation guide HAB_322b. Connecting Bracket 1/4-2, 5/8" Long Screw NOTE: Cable Channels are Hidden for Illustration Purpose. Optional: If Mid Power Pole is specified.
- Page 214 height-adjustable bench Installation Guides Date: Sept 2019 Page: 10 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a ATTACH SUPPORT BRACKET SCREEN AND GABLES NOTE: Parts of the Frames are NOTE: Please refer to Specification Drawing hidden for Illustration Purpose. to mount the correct Side Cover Assembly STEP 9: Insert Support Bracket through the cut-out on the Side Cover Assembly.
- Page 215 height-adjustable bench Installation Guides Date: Sept 2019 Page: 11 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a SECURE SIDE COVER ASSEMBLY CABLE CHANNEL ASSEMBLY NOTE:Install Cable Channel Cover Plate on Cable Channel Where E-Chain is not specified or unused location. NOTE: Electrics are not included with the Cable Channel.
- Page 216 height-adjustable bench Installation Guides Date: Sept 2019 Page: 12 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a ATTACH CABLE CHANNEL & CENTER RAIL SECURE CABLE CHANNEL Underside View STEP 12: Align holes on Support Brackets, Cable Channel Assembly. Insert Bolts inside STEP 13: Secure Cable Channel in place with Nuts.
- Page 217 height-adjustable bench Installation Guides Date: Sept 2019 Page: 13 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a ATTACH SUPPORT BRACKET MOUNT SIDE COVER ASSEMBLY STEP 14: Insert Support Bracket through the cut-out on the Side Cover Assembly. STEP 15: Mount Side Cover Assembly onto the Stretcher Bar as shown.
- Page 218 height-adjustable bench Installation Guides Date: Sept 2019 Page: 14 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a SECURE SIDE COVER ASSEMBLY ATTACH MAGNET NOTE: Attach Magnets approximately to the locations to the legs NOTE: Parts of the Frame are hidden for Illustration Purpose.
- Page 219 height-adjustable bench Installation Guides Date: Sept 2019 Page: 15 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a MOUNT FRONT COVER ASSEMBLIES NOTE: Legs are Hidden for Illustration Purpose. NOTE: Make sure Magnets are attached to the Legs. STEP 18: Mount Front Covers onto the Side Covers as shown in Detail View. Repeat this on the other side as well. NOTE: Make sure Magnets are attached to the legs...
- Page 220 height-adjustable bench Installation Guides Date: Sept 2019 Page: 16 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a CABLE CHANNEL ASSEMBLY ATTACH TOP COVER NOTE: Parts of the Frames are hidden for Illustration Purpose. STEP 19: Align holes on Support Brackets, Cable Channel Assembly. Insert Bolts inside STEP 20: Attach Top Covers onto the highlighted extrusions on the Side and Front Cover Center Rail Extrusion through Cable Channel Assembly and Brackets as shown.
- Page 221 height-adjustable bench Installation Guides Date: Sept 2019 Page: 17 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a TOP COVER WITH POWER POLE COUTOUT (OPTIONAL) NOTE: Only when Power Pole option is selected. STEP 21: If Mid gable Power Pole is Specified, attach Top Covers onto the hightlighted extrusions on the Side and Front Cover Assemblies as shown.
- Page 222 height-adjustable bench Installation Guides Date: Sept 2019 Page: 18 of 18 Section: METAL GABLES & CABLE CHANNEL HAB_223a CENTER RAIL EXTRUSION CAP STEP 22: Insert Center Rail Extrusion Caps onto Center Rail Extrusion as Shown.
- Page 223 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b Rev.01 Navigate Mid Gable - Solid (HNBCGMSN), Navigate Cable Channel (HNBFCN), Navigate End Gable - Solid (HNBCGESN) 3.10 3.11...
- Page 224 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER 1. Navigate Wire Channel (HNBFCN) x1 1/4-20X5/8"...
- Page 225 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION PREVIEW DESCRIPTION NUMBER NUMBER 2. Navigate End Gable - Solid (HNBCGESN) x1 1/4-20 UNCx0.500"...
- Page 226 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER FRONT HANGING BRKT 3. Navigate Mid Gable - Solid - Mid Condition (HNBCGMSN) x1 FOR WOOD MID GABLE, A16-3028 BOTTOM BRKT FOR...
- Page 227 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER 4. Navigate Wire Channel_Single Sided (HNBFCN_S) x1 5/16-18 HEX NUT, 1/2 A/F, E01-0755...
- Page 228 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b REMOVE SUPPORT BRACKETS STEP 1: Remove Support Brackets.
- Page 229 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b ATTACH GABLE SUPPORT BRACKET ATTACH SUPPORT BRACKET STEP 2: Attach and Fasten Gable Brackets. STEP 3: Insert Support Bracket through the cut-out on the Inside Cover Assembly as shown.
- Page 230 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b ATTACH CONNECTING PLATES TO FRAME LEGS MOUNT INSIDE COVER ASSEMBLY NOTE: Parts of the Frame are hidden for Illustration Purpose. Leveler Leg Hex Bolt STEP 4: Loosen Legs Hex Bolt on both Legs to allow enough clearance for gable connecting STEP 5: Mount Inside Cover Assembly onto Frame Stretcher Bar.
- Page 231 height-adjustable bench Installation Guides Date: Sept 2019 Page: 9 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b SECURE INSIDE COVER IN PLACE SECURE INSIDE COVER ASSEMBLY TO FRAME STEP 6: Make sure the face of the Inside Cover Assembly is flush with the Leg. Secure Inside STEP 7: Secure Inside Cover Assembly to Stretcher Bar with Bolts.
- Page 232 height-adjustable bench Installation Guides Date: Sept 2019 Page: 10 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b MOUNT OUTSIDE COVER ASSEMBLY NOTE: Parts of the Frame are hidden for Illustration Purpose. Section View Section View STEP 8:Mount Outside Cover Assembly to the highlighted part of the Inside Cover Assembly as shown.
- Page 233 height-adjustable bench Installation Guides Date: Sept 2019 Page: 11 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b ATTACH CONNECTING PLATES TO FRAME Leg Hex Bolt 3.11 STEP 9: Loosen Hex Bolt to allow enough room for Gable Connecting Plate. Fasten Gable Connecting Plates to Frame Legs.
- Page 234 height-adjustable bench Installation Guides Date: Sept 2019 Page: 12 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b MOUNT BOTTOM ANGLE BAR MID POWER POLE SUPPORT PLATE 3.12 3.10 Connecting Bracket 3.10 Hex Bolt 5/16" x1" Long ZP NOTE: Refer to installation Underside View 3.12 guide HAB_322b for detail.
- Page 235 height-adjustable bench Installation Guides Date: Sept 2019 Page: 13 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b ATTACH MID GABLE SUPPORT BRACKET MOUNT SIDE COVER ASSEMBLY NOTE: Parts of the Frame are hidden for Illustration Purpose. 3.14 3.15 3.13 NOTE: Please Refer to Specificstion Drawing to mount the correct side Cover Assembly.
- Page 236 height-adjustable bench Installation Guides Date: Sept 2019 Page: 14 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b SECURE SIDE COVER ASSEMBLY CABLE CHANNEL ASSEMBLY NOTE:Install Cable Channel Cover Plate on Cable Channel Where E-Chain is not specified or unused location. NOTE: Electrics are not included with the Cable Channel.
- Page 237 height-adjustable bench Installation Guides Date: Sept 2019 Page: 15 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b ATTACH CABLE CHANNEL & CENTER RAIL SECURE CABLE CHANNEL Underside View NOTE: Electrics Components to be installed on Cable Channel before connecting to support Bracket.
- Page 238 height-adjustable bench Installation Guides Date: Sept 2019 Page: 16 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b MOUNT FRONT COVER ASSEMBLY Sectrion View STEP 16: Mount Front Covers onto the Frame Link and Bottom connecting Brackets.
- Page 239 height-adjustable bench Installation Guides Date: Sept 2019 Page: 17 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b TOP COVER W/ POWER POLE CUTOUT (OPTIONAL) NOTE: Parts of the Frames are hidden for Illustartion Pupose. NOTE: Parts of the Frames are hidden for Illustartion Pupose.
- Page 240 height-adjustable bench Installation Guides Date: Sept 2019 Page: 18 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b ATTACH TOP COVER NOTE: Parts of the Frames are Hidden for Illustration Purpose. 3.16 STEP 17b: Rest Top Covers onto Gable structures as Shown.
- Page 241 height-adjustable bench Installation Guides Date: Sept 2019 Page: 19 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b CENTER RAIL EXTRUSION CAP STEP 18: Insert Center Rail Extrusion Caps onto Center Rail Extrusion as Shown.
- Page 242 height-adjustable bench Installation Guides Date: Sept 2019 Page: 20 of 20 Section: SOLID GABLES & CABLE CHANNEL HAB_223b INSTALL CABLE CHANNEL (120 FRAME) INSTALL CABLEE CHANNEL (SINGLE SIDED FRAME) 120 Frame Single Sided Frame NOTE: Follow the similiar steps to Install Cable Channel onto the 120 Frame.
- Page 243 height-adjustable bench Installation Guides Date: May 2019 Page: 1 of 4 SCREENS & GABLES Section: HAB_223c Rev. 0 Navigate End Cover - Metal (HNBCCEMN), Navigate Mid Cover - Metal (HNBCCMMN) Note: Mid Cover with Power Pole Cut-out is Shown as Example. For Cable Channel installation procedures, please refer to guide HAB_223a/223b...
- Page 244 height-adjustable bench Installation Guides Date: May 2019 Page: 2 of 4 SCREENS & GABLES Section: HAB_223c Part & Product Identification ITEM NO. PREVIEW DESCRIPTION PART NUMBER QTY. END COVER, DOUBLE SIDED, HAB A16-7445-X MID COVER, DOUBLE SIDED, HAB A16-7446B\60...
- Page 245 height-adjustable bench Installation Guides Date: May 2019 Page: 3 of 4 Section: SCREENS & GABLES HAB_223c PLACE END COVER & BRACKET ON FRAME BAR SECURE END COVER IN PLACE Note: Support Bracket ships with Cable Channel. For Cable Channel installation procedures, please refer to guide HAB_223a/223b STEP 1: Slide Cable Channel Support Bracket into End Cover, making sure holes align.
- Page 246 height-adjustable bench Installation Guides Date: May 2019 Page: 4 of 4 Section: SCREENS & GABLES HAB_223c PLACE MID COVER ON STRETCHER BARS SECURE MID COVER IN PLACE Note:For Cable Channel installation procedures, please refer to guide HAB_223a/223b STEP 3: Place Metal Mid Cover on top of Stretcher Bars and Cable Channel Support STEP 4: Use Screws provided with Support Brackets to secure Metal Mid Cover in place.
- Page 247 height-adjustable bench Installation Guides Date: Aug 2019 Page: 1 of 5 Section: SCREENS & GABLES HAB_223d Rev. 01 Navigate End Screen Cover - Metal (HNBCCSMN), Navigate End of Run Screen (HNBTEF) 1.2.1 1.2.2...
- Page 248 height-adjustable bench Installation Guides Date: Aug 2019 Page: 2 of 5 Section: SCREENS & GABLES HAB_223d Rev. 01 Part & Product Identification ITEM NO. PREVIEW DESCRIPTION PART NUMBER QTY. 1. Navigate End of Run Fabric Screen (HNBTEF) x1 NAVIGATE END OF RUN FABRIC SCREEN HNBTEF-X 1.2.
- Page 249 height-adjustable bench Installation Guides Date: Aug 2019 Page: 3 of 5 Section: SCREENS & GABLES HAB_223d ATTACH BRACKETS TO SCREEN ATTACH BRACKETS TO FRAME NOTE: Ensure the Screen is leveled. 1.2.3 1.2.2 1.2.3 1.2.1 STEP 1: Attach Outer Brackets to Screen using Screws provided. STEP 2: Attach Inner Brackets to Frame using Screws provided.
- Page 250 height-adjustable bench Installation Guides Date: Aug 2019 Page: 4 of 5 Section: SCREENS & GABLES HAB_223d ATTACH SCREEN TO FRAME PLACE END COVER & BRACKET ON FRAME BAR NOTE: Support Bracket ships with Cable Channel. For Cable Channel installation procedures, please refer to guide HAB_223a/223b 1.2.2 1.2.1...
- Page 251 height-adjustable bench Installation Guides Date: Aug 2019 Page: 5 of 5 Section: SCREENS & GABLES HAB_223d INSTALL END COVER PLACE TOP COVER IN POSITION NOTE: Parts of the Frame are hidden for Illustration purpose. STEP 5: Secure Inside Cover in place using Support Bracket screws STEP 6: Place Top Cover on top of Inside Cover...
- Page 252 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 6 Section: SCREENS & GABLES HAB_223e Rev. 01 Navigate End Screen Gable - Metal (HNBCGSMN), Navigate End of Run Screen (HNBTEF) 1.2.2 1.2.1...
- Page 253 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 6 Section: SCREENS & GABLES HAB_223e Rev. 01 Part & Product Identification ITEM NO. PREVIEW DESCRIPTION PART NUMBER QTY. 1. Navigate End of Run Fabric Screen. (HNBTEF) x1 NAVIGATE END OF RUN FABRIC SCREEN HNBTEF 1.2.
- Page 254 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 6 Section: SCREENS & GABLES HAB_223e ATTACH OUTER BRACKETS TO SCREEN ATTACH GABLE CONNECTORS TO LEGS NOTE: Ensure the Screen is Leveled. NOTE: Bolts come with the Table Frame. 1.2.2 1.2.3 STEP 1: Attach Outer Bracket to End Screen using Screws provided STEP 2: Loosen Bolts that come with the Table Frame, and slide Gable Connector to...
- Page 255 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 6 Section: SCREENS & GABLES HAB_223e LINE UP INSIDE COVER AND BRACKET SECURE INSIDE COVER TO CONNECTOR STEP 3: Line up the Cable Channel Bracket with the Inside Cover, and place against the STEP 4: Use Screws provided to secure the Inside Cover to the Gable Connector horizontal frame...
- Page 256 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 6 Section: SCREENS & GABLES HAB_223e SCREW COVER TO BRACKET ATTACH BRACKETS TO FRAME NOTE: Support Bracket ships with Cable Channel. For Cable Channel installation procedures, please refer to guide HAB_223a/223b 1.2.3 1.2.1 STEP 5: Screw the Inside Cover to the bracket using the Screws provided in the Cable...
- Page 257 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 6 Section: SCREENS & GABLES HAB_223e ATTACH END SCREEN TO FRAME PLACE TOP COVER ON FRAME NOTE: Raise the 1.2.2 frame to its' maximum height before placing the Top Cover NOTE: Parts of the Frame are Hidden for Illustration Purpose.
- Page 258 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 8 Section: SCREENS AND GABLES HAB_224 Rev. Navigate Single-Sided Corridor Screen – Fabric (HNBLSF), Navigate Single-Sided Corridor Screen – Solid (HNBLSS) 1.5.3 1.5.1 1.5.2...
- Page 259 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 8 Section: SCREENS AND GABLES HAB_224 Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER 1. NAVIGATE SINGLE SIDED CORRIDOR SCREEN - FABRIC (HNBLSF) 1.5.
- Page 260 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 8 SCREENS AND GABLES Section: HAB_224 Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER 2. NAVIGATE SINGLE SIDED CORRIDOR SCREEN - SOLID (HNBLSS) 2.3.
- Page 261 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 8 Section: SCREENS AND GABLES HAB_224 ATTACH BRACKETS ASSEMBLE T-NUTS NOTE: HNBLSF Shown 1.5.1 1.5.2 1.5.3 1.5.4 STEP 1a: Attach Brackets as shown above with screws provided. STEP 2a: Assemble T-Nuts as shown above.
- Page 262 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 8 Section: SCREENS AND GABLES HAB_224 ATTACH BRACKETS ASSEMBLE T-NUTS NOTE: HNBLSS Shown 2.3.3 2.3.1 2.3.2 2.3.4 STEP 1b: Attach Brackets as shown above with screws provided. STEP 2b: Assemble T-Nuts as shown above.
- Page 263 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 8 Section: SCREENS AND GABLES HAB_224 ALIGN T-NUTS NOTE: Frame and Worksurface Assmbly is not shown for illustration purpose. STEP 3: Align T-Nuts parallel to the wire channel.
- Page 264 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 8 Section: SCREENS AND GABLES HAB_224 FASTEN SCREWS NOTE: Worksurface not shown for illustration purpose. STEP 4: Fasten T-Nuts with an Allen Key. Make sure the screen is perpendicular to the ground.
- Page 265 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 8 Section: SCREENS AND GABLES HAB_224 ADJUST LEVERLLERS (OPTIONAL) STEP 5: Using a wrench, adjust Levellers to achieve stability.
- Page 266 height-adjustable bench Installation Guides Date: May 2019 Page: 1 of 4 Section: SCREENS & GABLES HAB_224a Rev. 00 Navigate 120 Mid Cover - Metal (HNBCCMMT)
- Page 267 height-adjustable bench Installation Guides Date: May 2019 Page: 2 of 4 Section: SCREENS & GABLES HAB_224a Rev. 00 Part & Product Identification ITEM NO. PREVIEW DESCRIPTION PART NUMBER QTY. TOP COVER MID GABLE WELDED ASSY. 120 NAV. HAB N09-8988X SPACER MID GABLE 120 NAVIGATE HAB A16-7672 COVER PLATE MID-GABLE 120 NAVIGATE HAB A16-7449...
- Page 268 height-adjustable bench Installation Guides Date: May 2019 Page: 3 of 4 Section: SCREENS & GABLES HAB_224a Rev. 00 ATTACH COVER PLATE TO FRAME ATTACH SPACER TO FRAME NOTE: Bracket and Screws come NOTE: Please refer to HAB_123 for with Cable Channel hardware components required STEP 1: Attach the Cover Plate to the Legs and Mid-Gable Stretcher Assembly using the STEP 2: Attach the Spacer to the Mid-Gable Stretcher Frame along with the Bracketm using...
- Page 269 height-adjustable bench Installation Guides Date: May 2019 Page: 4 of 4 Section: SCREENS & GABLES HAB_224a Rev. 00 PLACE TOP COVER STEP 3: Place the Top Cover on top of the Assembly.
- Page 270 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 4 Section: SCREENS AND GABLES HAB_225a Rev. Navigate Single-Sided End Cover – Metal (HNBCCEMS), Navigate Single-Sided Mid Cover – Metal (HNBCCMMS)
- Page 271 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 4 Section: SCREENS AND GABLES HAB_225a Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVIGATE END COVER, SINGLE SIDED, HAB (HNBCCEMS30L) 3.
- Page 272 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 4 Section: SCREENS AND GABLES HAB_225a PLACE GABLE COVER (RIGHT) PLACE GABLE COVER (LEFT) STEP 1a: Place the End Gable Cover - Right as shown above. STEP 1b: Place the End Gable Cover - Left as shown above.
- Page 273 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 4 Section: SCREENS AND GABLES HAB_225a PLACE THE MID GABLE COVER STEP 3: Place Mid-Gable Cover as shown above.
- Page 274 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 6 Section: SCREENS AND GABLES HAB_225b Rev. 0 NAVIGATE SINGLE-SIDED END SCREEN COVER (HNBCCSMS), NAVIGATE SINGLE-SIDED END OF RUN SCREEN - FABRIC (HNBTSF)
- Page 275 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 6 Section: SCREENS AND GABLES HAB_225b Part & Product Identification ITEM PREVIEW DESCRIPTION PART NUMBER QTY. NAVIGATE END OF RUN FABRIC SCREEN SS HNBTSF-X 2. FABRIC END SCREEN MOUNTING BRKT KIT, SINGLE SIDED, HAB (X06-0618) x1 END SCREEN BRKT ASSY, INNER, SINGLE N09-9207 SIDED, HAB...
- Page 276 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 6 Section: SCREENS AND GABLES HAB_225b ATTACH BRACKETS TO SCREEN ATTACH BRACKETS TO FRAME STEP 1: Attach Outer Brackets to Screen using Screws provided. STEP 2: Attach Inner Brackets to Frame using Screws provided.
- Page 277 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 6 Section: SCREENS AND GABLES HAB_225b ATTACH SCREEN TO FRAME (WITH CORRIDOR SCREEN ONLY) NOTE: For the installation instructions of the Wire Channel (HNBFCN), refer to guide HAB_225d/225e. For the Corridor Screen (HNBLS), refer to guide HAB_224. STEP 3: If a Corridor Screen has already been installed, remove the End Trim from the Corridor Screen, and attach the End-of-Run Screen to the Frame using the Screws provided and by connecting the Corner Connecting Trim to the the Corridor Screen.
- Page 278 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 6 Section: SCREENS AND GABLES HAB_225b ATTACH SCREEN TO FRAME PLACE INSIDE COVER ON FRAME NOTE: If the Screen is tilted forwards or backwards, the slots in the Outer/Inner Brackets allow the screen to be adjusted STEP 4: Attach the End Screen to the Frame using the Screws Provided.
- Page 279 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 6 Section: SCREENS AND GABLES HAB_225b PLACE TOP COVER IN POSITION STEP 6: Place Top Cover on top of the Inside Cover...
- Page 280 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 6 Section: SCREENS AND GABLES HAB_225c Rev. 0 NAVIGATE SINGLE-SIDED END OF RUN SCREEN GABLE (HNBCGSMS), NAVIGATE SINGLE-SIDED END OF RUN SCREEN - SOLID (HNBTSS)
- Page 281 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 6 Section: SCREENS AND GABLES HAB_225c Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. STICK ON CLEAR BUMPER D04-0050 4. NAVIGATE END SCREEN GABLE, SINGLE SIDED, HAB (HNBCGSMS) x1 NAVIGATE END SCREEN, HNBTSS-X SOLID, SINGLE SIDED, HAB...
- Page 282 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 6 Section: SCREENS AND GABLES HAB_225c ATTACH OUTER BRACKETS TO SCREEN ATTACH GABLE CONNECTORS TO LEGS NOTE: Ensure the screen is leveled. NOTE: Bolts come with the Table Frame STEP 1: Attach Outer Brackets to the End Screen using Screws provided. STEP 2: Loosen Bolts that come with the Table Frame, and slide the Gable Connectors to the underside of the legs.
- Page 283 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 6 Section: SCREENS AND GABLES HAB_225c PLACE INSIDE COVER ON FRAME SECURE INSIDE COVER TO CONNECTOR STEP 3: Place the Inside Cover on the Frame. Ensure the Inside Cover Brackets are mounted STEP 4: Use Screws provided to secure the Inside Cover to the Gable Connector.
- Page 284 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 6 Section: SCREENS AND GABLES HAB_225c ATTACH BRACKETS TO FRAME ATTACH BUMPER (OPTIONAL) NOTE: For the installation instructions of the Wire Channel (HNBFCN), refer to guide HAB_225d/225e. For the Corridor Screen (HNBLS), refer to guide HAB_224. STEP 5: Secure Inner Bracket to Frame using the Screws provided.
- Page 285 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 6 Section: SCREENS AND GABLES HAB_225c ATTACH END SCREEN TO FRAME PLACE TOP COVER ON FRAME NOTE: Raise the frame to its' MAXIMUM height before placing the Top Cover. NOTE: If the screen is tilted forwards or backwards, the slots in the Outer/Inner brackets allow the screen to be adjusted.
- Page 286 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 7 Section: SCREENS AND GABLES HAB_225d Rev. Navigate Single-Sided End Gable - Metal (HNBCGEMS), Navigate Single-Sided Mid Gable - Metal (HNBCGMMS) HNBCGEMS shown HNBCGMMS shown...
- Page 287 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 7 Section: SCREENS AND GABLES HAB_225d Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVIGATE END GABLE, METAL, SINGLE SIDED, HAB (HNBCGEMS) 2.
- Page 288 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 7 Section: SCREENS AND GABLES HAB_225d ATTACH CONNECTING PLATES TO FRAME LEGS MOUNT INSIDE COVER STEP 1: Loosen Leg Hex Bolt to attach Gable Connecting Plates to Frame leg. Then, Fasten STEP 2:Mount Inside Cover Assembly onto Frame Stretcher Bar.
- Page 289 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 7 Section: SCREENS AND GABLES HAB_225d FASTEN INSIDE COVER IN PLACE APPLY FOAM RUBBERS STEP 3: Make sure the face of the Inside Cover Assembly is flush with the Leg. Secure Inside STEP 4: Attach Foam Rubbers onto the center of the Frame Legs' inner side.
- Page 290 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 7 Section: SCREENS AND GABLES HAB_225d MOUNT OUTSIDE COVER ASSEMBLY Side View Detailed Isometric View STEP 5: Mount Outside Cover Assembly to the highlighted part of the Inside Cover Assembly as shown.
- Page 291 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 7 Section: SCREENS AND GABLES HAB_225d MOUNT SIDE COVER ASSEMBLY NOTE: Installation of HNBCGMSS shown Side View STEP 7: Mount Side Cover Assembly as shown above.
- Page 292 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 7 Section: SCREENS AND GABLES HAB_225d FRONT COVER ASSEMBLY PLACE TOP COVERS STEP 8: Place the magnet then, mount Front Cover Assembly as shown above. STEP 9: Place Back Top Cover and Top Cover as shown above.
- Page 293 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 10 Section: SCREENS AND GABLES HAB_225e Rev. Navigate Single-Sided End Gable - Solid (HNBCGESS), Navigate Single-Sided Mid Gable - Solid (HNBCGMSS) 2.13...
- Page 294 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 10 Section: SCREENS AND GABLES HAB_225e Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVITAGE END GABLE, SOLID, SINGLE SIDED, HAB (HNBCGESS30) HANGING BRACKET FOR A16-3021...
- Page 295 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 10 Section: SCREENS AND GABLES HAB_225e Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER GABLE CONNECTING 2.11 A16-3651 PLATE SIDE COVER FOR MID C07- GABLE, SINGLE 4718AL\30...
- Page 296 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 10 Section: SCREENS AND GABLES HAB_225e ATTACH CONNECTION PLATES TO FRAME LEGS ATTACH SUPPORT BRACKETS STEP 1: Loosen Legs Hex Bolt to allow enough room for Gable Connecting Plate. Fasten STEP 2: Fasten Brackets to Outside Cover Assembly Gable Connecting Plates to Frame Legs.
- Page 297 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 10 Section: SCREENS AND GABLES HAB_225e MOUNT INSIDE COVER ASSEMBLY MOUNT INSIDE COVER ASSEMBLY STEP 3: Mount Inside Cover Assembly onto Stretcher Bar. STEP 4: Secure Inside Cover Assembly to Gable Connecting Plate on both sides using Tap Quad Pan screws provided.
- Page 298 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 10 Section: SCREENS AND GABLES HAB_225e MOUNT OUTSIDE COVER ASSEMBLY STEP 5: Mount Outside Cover Assembly to Stretcher Bar as shown above.
- Page 299 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 10 Section: SCREENS AND GABLES HAB_225e ATTACH CONNECTING PLATES TO FRAME LEGS MOUNT BOTTOM ANGLE BAR 2.17 2.11 STEP 6: Loosen Legs Hex Bolt to allow enough room for Gable Connecting Plate. Fasten STEP 7: Mount Bottom Angle Bar and secure to Gable Connecting Plate on both sides using Gable Connecting Plates to Frame Legs Tap Quad Pan screws provided...
- Page 300 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 10 Section: SCREENS AND GABLES HAB_225e ATTACH SUPPORT BRACKETS - 1 ATTACH SUPPORT BRACKETS - 2 2.12 2.16 2.14 2.18 2.16 2.16 STEP 8: Fasten Brackets and Cover Plates to Side Cover Assemblies as shown. STEP 9: Fasten Brackets and Cover Plates to Front Covers as shown.
- Page 301 height-adjustable bench Installation Guides Date: Sept 2019 Page: 9 of 10 Section: SCREENS AND GABLES HAB_225e MOUNT SIDE COVER ASSEMBLY STEP 10: Mount Side Cover Assembly onto the Stretcher Bar as shown.
- Page 302 height-adjustable bench Installation Guides Date: Sept 2019 Page: 10 of 10 Section: SCREENS AND GABLES HAB_225e MOUNT FRONT COVER ASSEMBLY PLACE TOP COVERS STEP 11: Mount Front Covers onto the Frame Link and Bottom Connecting Brackets. STEP 12: Place Top Covers as shown above.
- Page 303 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 6 Section: METAL GABLES & CABLE CHANNEL HAB_225f Rev. 00 Navigate Single-Sided Transition Mid-Gable - Metal (HNBCGMMR)
- Page 304 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 6 Section: METAL GABLES & CABLE CHANNEL HAB_225f Rev. 00 Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER TOP COVER FOR METAL MID GABLE W/POWER A16-7491-X POLE, DOUBLE SIDED,...
- Page 305 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 6 Section: METAL GABLES & CABLE CHANNEL HAB_225f Rev. 00 INSTALL BRACKET INSTALL FRAME LINK NOTE: Refer to HAB_101 for installation steps for the Frame Link STEP 1: Attach Bracket to stretcher bar using Screws provided. STEP 2: Install Frame Link to join both frames.
- Page 306 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 6 Section: METAL GABLES & CABLE CHANNEL HAB_225f Rev. 00 ASSEMBLE BACK COVER ATTACH SIDE COVER TO FRAME NOTE: Bracket and Screws included with Wire Channel, refer to HAB_223a for more steps.
- Page 307 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 6 Section: METAL GABLES & CABLE CHANNEL HAB_225f Rev. 00 ATTACH SIDE COVER INSTALL BACK COVER STEP 5: Hook Side Cover over stretcher bar on Single-Sided Frame. STEP 6: Hook Back Cover assembly over the corners of rhe Side Covers. The magnet should stick to the leg of the Single-Sided Frame.
- Page 308 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 6 Section: METAL GABLES & CABLE CHANNEL HAB_225f Rev. 00 ATTACH FRONT COVER PLACE TOP COVER ON GABLE STEP 7: Place magnets in between the rivets at the bottom of the Front Cover. Hook corners STEP 8: Raise the tables, then place the Top Cover on top of the gable assembly.
- Page 309 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 11 Section: SCREENS & GABLES HAB_225g Rev. 0 Navigate Transition Mid Gable - Solid (HNBCGMSR) NOTE: HNBCGMSR_L is Shown as an Example.
- Page 310 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 11 Section: SCREENS & GABLES HAB_225g Part & Product Identification ITEM PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVIGATE TRANSITION MID GABLE, SOLID (HNBCGMSR)x1 SIDE COVER FOR MID GABLE, DOUBLE SIDED, HAB C07-4593X-X SIDE COVER FOR MID GABLE, SINGLE SIDED, HAB C07-4718R-X...
- Page 311 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 11 Section: SCREENS & GABLES HAB_225g Part & Product Identification ITEM PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVIGATE TRANSITION MID GABLE, SOLID (HNBCGMSR)x1 GABEL CONNECTING PLATE A16-3651 HANGING BRACKET, FOR WOOD MID GABLE, A16-3203 BOTTOM CONNECTING BRKT ,WOOD MID A16-3026...
- Page 312 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 11 Section: SCREENS & GABLES HAB_225g Part & Product Identification ITEM PART PREVIEW DESCRIPTION QTY. NUMBER 1. NAVIGATE TRANSITION MID GABLE, SOLID (HNBCGMSR)x1 HANGING BRACKET, FOR WOOD MID GABLE, A16-7569R SINGLE SIDED, HAB CORNER BRKT, TRANSITION SOLID MID GABLE, A16-7732...
- Page 313 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 11 Section: SCREENS & GABLES HAB_225g INSTALL BRACKET INSTALL FRAME LINK NOTE: Refer to HAB_101 for installation steps for thr Frame Link. STEP 1:Attach Bracket to Stretcher bar using Screws provided. STEP 2: Install Frame Link to join both frames.
- Page 314 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 11 Section: SCREENS & GABLES HAB_225g ATTACH CONNECTING PLATES MOUNT BOTTOM ANGLE BAR NOTE: Parts of the Frames are Hidden for Illustration purpose. STEP 3: Loosen Hex Bolt to allow enough room for gable connecting Plate. Fasten Gable STEP 4: Mount both Bottom Angle Bars and Secure to Gable Connecting Plates on both Connecting plates to the Frame Legs.
- Page 315 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 11 Section: SCREENS & GABLES HAB_225g ATTACH MID GABLE SUPPORT BRACKETS STEP 5: Secure the Brackets and Cover Plates to Side cover, Back Cover, Front Cover and Transition Cover as shown. Rotate Screws Clockwise to Fasten.
- Page 316 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 11 Section: SCREENS & GABLES HAB_225g MOUNT SIDE COVER ASSEMBLY MOUNT BACK COVER ASSEMBLY NOTE: Parts of the Frames are Hidden for Illustration purpose. NOTE: Parts of the Frames are Hidden for Illustration purpose.
- Page 317 height-adjustable bench Installation Guides Date: Sept 2019 Page: 9 of 11 Section: SCREENS & GABLES HAB_225g ATTACH TRANSITION GABLE COVER SECURE TRANSITION GABLE COVER NOTE: Parts of the Frames are Hidden for Illustration purpose. NOTE: Parts of the Frames are Hidden for Illustration purpose.
- Page 318 height-adjustable bench Installation Guides Date: Sept 2019 Page: 10 of 11 Section: SCREENS & GABLES HAB_225g MOUNT SIDE COVER ASSEMBLY MOUNT FRONT COVER ASSEMBLY NOTE: Parts of the Frames are Hidden for Illustration purpose. NOTE: Parts of the Frames are Hidden for Illustration purpose.
- Page 319 height-adjustable bench Installation Guides Date: Sept 2019 Page: 11 of 11 Section: SCREENS & GABLES HAB_225g ATTACH TOP COVER NOTE: Parts of the Frames are Hidden for Illustration purpose. STEP 12: Rest Top Cover ontoGable Assembly as shown.
- Page 320 Standard Power Module (HABEPMS), Chicago Power Module (HABEPMCH), Receptacle Outlet (HABERO), I-Connector (HABEIC) A1 - Standard Power Module (HABEPMS) x1 For Customer Support please contact product.support@teknion.com B1 - Power Module Covers (MPA15-E784) x1 C1 - 8 x 1/2" RND, ROB, Zinc type B (FS8 x 1.2-RRB) x11...
- Page 321 height-adjustable bench Section: Date: Jun 2017 Page No: 2 of 9 Description: HAB_301a HIGH CAPACITY POWER MODULE ASSEMBLY STEP 1a: Place the Receptacle against the STEP 3a: Fasten with Screws. Power Module. DETAIL STEP 2a: Slide to left to engage or right for STEP 4a: Fasten Bracket as Shown.
- Page 322 height-adjustable bench Section: Date: Jun 2017 Page No: 3 of 9 Description: HAB_301a STANDARD POWER MODULE ASSEMBLY STEP 1b: Place the Receptacle against the STEP 3b: Fasten with Screws. Power Module. DETAIL STEP 2b: Slide to left to engage or right for STEP 4b: Fasten Bracket as Shown.
- Page 323 height-adjustable bench Section: Date: Jun 2017 Page No: 4 of 9 Description: HAB_301a HIGH CAPACITY POWER MODULE ASSEMBLY Base Feed Power Module STEP 5a: Fasten Power Module assembly to underside of Cable Tray. Make sure to lineup holes of Cable tray to holes of Brackets.
- Page 324 height-adjustable bench Section: Date: Jun 2017 Page No: 5 of 9 Description: HAB_301a STANDARD POWER MODULE ASSEMBLY IMPORTANT: Fasten Standard Power Module ONLY in this orientation and at the location shown. Base Feed Location STEP 5b: Fasten Power Module assembly to underside of Cable Tray. Make sure to lineup holes of Cable tray to holes of Brackets.
- Page 325 height-adjustable bench Section: Date: Jun 2017 Page No: 6 of 9 Description: HAB_301a CHICAGO POWER MODULE ASSEMBLY NOTE: Licensed Electrician to install Chicago Base Feed. IMPORTANT: Fasten Chicago Power Module ONLY in this orientation and at the location shown. Base Feed Location STEP 5c: Fasten Chicago Power Module assembly to underside of Cable Tray.
- Page 326 height-adjustable bench Section: Date: Jun 2017 Page No: 7 of 9 Description: HAB_301a INSTALL POWER MODULE COVERS Tabs Follow same procedure when Power Modules are not shown installing covers to Standard in Cable Tray for clarification Power Module. only. STEP 6: Install Cover by inserting tabs of Cover inside cutouts of Cable Channel and fasten with screws. Make sure to lineup holes of cover with holes located under the Cable Tray.
- Page 327 height-adjustable bench Section: Date: Jun 2017 Page No: 8 of 9 Description: HAB_301a POWER HARNESS Underside View Underside View STEP 7: Connect Power Harness to Power Module and I-Connector to Power Harness...
- Page 328 height-adjustable bench Section: Date: Jun 2017 Page No: 9 of 9 Description: HAB_301a NOTE M-Clips Data Cover Wire Management Bracket Installers to determine the layout for the data, wire management bracket and m-clips in the hatched area.
- Page 329 height-adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 1 of 8 Description: BASE FEED, BASE FEED COVER AND MID BASE FEED HAB_301b Rev. No: 2 Base Feed End Condition (HABEBF), Split Base Feed (HABEBFS), Chicago Part and Product Identification Base Feed End Condition (HABEBFCH), Base Feed Cover (HABEBC), Base Feed Mid Condition (HABEBF__M) A1 - Base Feed...
- Page 330 height-adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 2 of 8 Description: BASE FEED, BASE FEED COVER AND MID BASE FEED HAB_301b INSTALL SPLIT BASE FEED INSTALL BOX COVER (OPTIONAL) Underside View STEP 1a: Install Split Base Feed. STEP 1b: Install Box Cover...
- Page 331 height-adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 3 of 8 Description: BASE FEED, BASE FEED COVER AND MID BASE FEED HAB_301b INSTALL BASE FEED INSTALL CABLE TRAY NOTE: Flip Cable Tray over and install to Frame. Cable Tray to be installed AFTER ALL Electrical components have been installed.
- Page 332 height-adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 4 of 8 Description: BASE FEED, BASE FEED COVER AND MID BASE FEED HAB_301b BRAKET TO STRETCHER BAR LOOSEN SCREW Stretcher Bar STEP 4: Fasten Bracket to underside of Stretcher Bar. STEP 5: Loosen screw to allow the cover bracket to adjust in height.
- Page 333 height-adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 5 of 8 Description: BASE FEED, BASE FEED COVER AND MID BASE FEED HAB_301b ADJUST COVER TIGHTEN SCREW Finish Floor STEP 6: Adjust Cover so it rest on Finish Floor. STEP 7: Tighten Screws.
- Page 334 height-adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 6 of 8 Description: BASE FEED, BASE FEED COVER AND MID BASE FEED HAB_301b INSERT CABLE INTO BASE FEED COVER Underside View STEP 8: Insert Base Feed Cable into Base Feed Cover as shown on illustration above.
- Page 335 height-adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 7 of 8 Description: BASE FEED, BASE FEED COVER AND MID BASE FEED HAB_301b INSTALL MID BASE FEED Underside View STEP 9: Fasten Middle bracket and Mid Base Feed. Install assembly to Stretcher Bars as shown.
- Page 336 height-adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 8 of 8 Description: BASE FEED, BASE FEED COVER AND MID BASE FEED HAB_301b NOTE M-Clips Data Cover Wire Management Bracket Installers to determine the layout for the data, wire management bracket and m-clips in the hatched area.
- Page 337 Robertson Screw (E01-1028) x2 C - WD Screw Pan Quad # 12 x 7/8" Black Oxide (E04-0087) x2 D - E-Chain Cable Tie (B02-0545) x1 E - LV Cable Manager Retainer For Customer Support please contact Clip product.support@teknion.com (A16-3890) x1...
- Page 338 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 2 of 6 Description: E-CHAIN HAB_301c INSTALL BOTTOM LINK INSTALL REINFORCEMENT CLIP Cable Tray Underside View STEP 1: Fasten Bottom Link to underside of Cable Tray. Make sure to lineup holes of Cable STEP 2: Place the Reinforcement Clip on top of the Top Link and connect the E-Chain to the Tray to holes of the Bottom Link.
- Page 339 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 3 of 6 Description: E-CHAIN HAB_301c INSTALL TOP LINK Pilot Holes Side View WorkSurface User Side Underside View Worksurface STEP 3: Install Top Link Assembly to the bottom of Worksurface. Make sure to align pilot holes to holes on top of the Top Link.
- Page 340 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 4 of 6 Description: E-CHAIN HAB_301c ATTACHE E-CHAIN TO TOP AND BOTTOM LINKS cable Cable STEP 4: Push Cable into E-Chain. STEP 5: Attach E-chain to Top Link STEP 6: Secure cables with Cable Tie.
- Page 341 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 5 of 6 Description: E-CHAIN HAB_301c NOTE Worksurface Make sure the E-Chain is installed straight. Side View...
- Page 342 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 6 of 6 Description: E-CHAIN HAB_301c NOTE M-Clips Data Cover Wire Management Bracket Installers to determine the layout for the data, wire management bracket and m-clips in the hatched area.
- Page 343 HAB_301d Rev. No: 2 Central Electrical Grommet Option (CEG1 or CEG2), Cable Tray (YEPD6) Part and Product Identification For Customer Support please contact product.support@teknion.com A1 - Grommet Cover A2 - Power Tray B1 - Grommet Cover B2 - Power Tray C - #10 x 0.875"...
- Page 344 height-adjustable bench Section: Date: Jun 2017 Page No: 2 of 5 Description: HAB_301d INSERT GROMMET COVER IN WORKSURFACE PLACE POWER TRAY UNDER WORKSURFACE Underside View Worksurface NOTE: Make sure outlets and data are centered in opening of Grommet STEP 1: Insert Grommet Cover inside Worksurface Grommet. STEP 1: STEP 2: Place Power Tray to underside of worksurface STEP 2:...
- Page 345 height-adjustable bench Section: Date: Jun 2017 Page No: 3 of 5 Description: HAB_301d FASTEN TRAY NOTE: REFER TO INSTALLATION GUIDE NO. HAB_101 TO INSTALL WORKSURFACE TO FRAME. STEP 3: Fasten with wood screws.
- Page 346 height-adjustable bench Section: Date: Jun 2017 Page No: 4 of 5 Description: HAB_301d ATTACH CABLE TRAY NOTE: Installer to determine location to install Cable Tray. STEP 4: Fasten Cable Tray to underside of Worksurface.
- Page 347 height-adjustable bench Section: Date: Jun 2017 Page No: 5 of 5 Description: HAB_301d INSTALL POWER BAR STEP 5: Snap Power Bar in place as shown on illustration above.
- Page 356 (AEA21-0200-09) x1 M - Flat Washer (FW 0.25) x 8 N - Connecting Bracket (MPA15-E786) x 1 G - Power Pole Cover Base (AEA23-E014-10) x2 O - Hex Bolt 5/16-18x1" For Customer Support please contact Long ZP (E03-0641) x2 product.support@teknion.com...
- Page 357 height adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 2 of 8 Description: POWER POLE - MID & CEILING FEED HAB_302b CONNECTING BRACKET ASSEMBLY ATTACH LOWER EXTRUSION NOTE: Install Connection Bracket then proceed Underside View Mid-Gable installation. STEP 1: Install Connecting Bracket to the underside of the Stretch Bar.
- Page 358 height adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 3 of 8 Description: POWER POLE - MID & CEILING FEED HAB_302b SECURE BOTTOM EXTRUSION CEILING CUT OUT 3-1/2" 3-1/2" Power Pole length = distance + 3" STEP 3: Fasten Bracket to Lower Power Pole. STEP 4: Mark Power Pole position on the ceiling using Plum Bob Line.
- Page 359 height adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 4 of 8 Description: POWER POLE - MID & CEILING FEED HAB_302b UPPER EXTRUSION ASSEMBLY CEILING FEED ASSEMBLY STEP 5: Insert Upper power Pole Extrusion inside ceiling cut-out (uncut edge down). Drop STEP 6: Drop Ceiling Feed cable down through ceiling cut-out down along the Power Pole Power Pole Upper Extrusion on the top of Lower Extrusion and connect them together using Slide junction box bracket inside the Power Pole Extrusion.
- Page 360 height adjustable bench Installation Guides Section: ELETRCIS Date: Jun 2017 Page No: 5 of 8 Description: POWER POLE - MID & CEILING FEED HAB_302b CABLE MANAGEMENT Cable Channel Mid Gable Top Cover STEP 6: Open Mid-Gable Top Cover and Connect Ceiling Feed and fish to the underside of the Cable Channel.
- Page 361 height adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 6 of 8 Description: POWER POLE - MID & CEILING FEED HAB_302b ATTACH LOWER COVER ATTACH UPPER COVER Ceiling STEP 7: Tuck cable and attach Power Pole Covers by engaging them into Lower Extrusion. STEP 8: Insert Upper Covers inside ceiling cut-out then engage into Upper Power Pole Extrusion.
- Page 362 height adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 7 of 8 Description: POWER POLE - MID & CEILING FEED HAB_302b ATTACH CEILING PLATES DRILL HOLES WARNING: Do not connect to power source until installation is complete. All wire connections must be performed by a licensed electrician in accordance with applicable codes and regulations.
- Page 363 height adjustable bench Installation Guides Section: ELECTRICS Date: Jun 2017 Page No: 8 of 8 Description: POWER POLE - MID & CEILING FEED HAB_302b PLATES INSTALLATION NOTE: Temporarily remove plates, in order to push T-nuts into pre-drilled holes,. Bring them back and fasten everything, as shown.
- Page 364 height adjustable bench Installation Guides Section: ELECTRICS Date: Jan 2018 Page No: 1 of 6 Description: POWER CONSERVATION SYSTEM INSTALLATION HAB_303 Rev. No: 0 Power Conservation System (HABEPC) Part and Product Identification A - #8 x 3/4 Slf Tping Scrw FS8x.075QPTEKS x4 B - Control Box Control Box-12.11 x1...
- Page 365 height adjustable bench Installation Guides Section: ELECTRICS Date: Jan 2018 Page No: 2 of 6 Description: POWER CONSERVATION INSTALLATION HAB_303 INSTALL POWER CONSERVATION SYSTEM CONNECT POWER CONSERVATION SYSTEM STEP 1: Install Power Conservation System beneath Cable Channel using Self Tapping Screws STEP 2: Connect Power Conservation System to Base Feed and Power Module...
- Page 366 height adjustable bench Installation Guides Section: ELECTRICS Date: Jan 2018 Page No: 3 of 6 Description: POWER CONSERVATION INSTALLATION HAB_303 MOUNT WORKSURFACES MOUNT SENSORS STEP 3: Mount Worksurfaces STEP 4: Mount Sensors using Wood Screws...
- Page 367 height adjustable bench Installation Guides Section: ELECTRICS Date: Jan 2018 Page No: 4 of 6 Description: POWER CONSERVATION SYSTEM INSTALLATION HAB_303 DESCRIPTION R 8.0' Note: Sensor placement will be based on location of User, Length of CAT3 Cable, and Desk Configuration...
- Page 368 height adjustable bench Installation Guides Section: ELECTRICS Date: Jan 2018 Page No: 5 of 6 Description: POWER CONSERVATION INSTALLATION HAB_303 CONNECT SENSOR TO POWER CONSERVATION SYSTEM Note: Press CAT3 Cable into Wire Manager STEP 5: Connect Sensor to Sensor using CAT3 Cable...
- Page 369 height adjustable bench Installation Guides Section: ELECTRICS Date: Jan 2018 Page No: 6 of 6 Description: POWER CONSERVATION INSTALLATION HAB_303 SENSOR GANGING STEP 6: Connect Sensors together using CAT3 Cable...
- Page 370 A3 - Chicago Power Box (HHBEPBCH) x1 CONNECTOR GUIDE A4 - #8-18 x 1/2" Cross Square Comb. Self (E07-0012) x4 FEMALE B - Power Harness (HHBEPH) x1 FEMALE MALE C - Extension Harness (HHBEEH) x1 FEMALE MALE For Customer Support please contact product.support@teknion.com MALE...
- Page 371 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 2 of 6 Description: HISPACE - POWER HARNESS AND POWER BOX HAB_311a REMOVE PANELS STEP 1: Remove Panels.
- Page 372 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 3 of 6 Description: HISPACE - POWER HARNESS AND POWER BOX HAB_311a INSTALL POWER BOX AND POWER HARNESS REINSTALL PANELS NOTE: Similar procedure for Chicago Power Box installation. NOTE: Please refer to Installation Guide No.
- Page 373 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 4 of 6 Description: HISPACE - POWER HARNESS AND POWER BOX HAB_311a POWER BOX TO CEILING FEED NOTE: Please refer to Installation Guide No. HAB_312 for Power Pole Power information.
- Page 374 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 5 of 6 Description: HISPACE - POWER HARNESS AND POWER BOX HAB_311a MULTIPLE MID GABLE & EXTENSION HARNESS APPLICATION (Connects NOTE: These will be Power Box to located in the Mid Gable. It another Power Box).
- Page 375 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 6 of 6 Description: HISPACE - POWER HARNESS AND POWER BOX HAB_311a MULTIPLE MID GABLE & EXTENSION HARNESS APPLICATION NOTE: These will be Female located in the Mid Gable. It is shown for clarification Male purpose only.
- Page 376 (HHBECR) x1 C - #8-18 x 1/2" Cross Square Comb. Self (E07-0012) x qty. varies D - #8 x 1/2" Long Tek Screw Drilling and Tap (FS8X1/2QPTEKS) x2 E - FS-10-16 x 7-16 QRB x2 For Customer Support please contact product.support@teknion.com...
- Page 377 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 2 of 4 Description: HISPACE - BASE FEED AND BASE FEED COVER HAB_311b INSTALL CABLE RISER ADJUST CABLE RISER Underside View STEP 1: Fasten Base Feed Cover to underside of Tray as shown. STEP 2: Loosen Screw to allow the Cover Bracket to adjust in height (1).
- Page 378 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 3 of 4 Description: HISPACE - BASE FEED AND BASE FEED COVER HAB_311b INSTALL BASE FEED INSTALL SPLIT BASE FEED NOTE: Similar Installation for Chicago Base Feed. Underside View Underside View STEP 3a: Install Base Feed.
- Page 379 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 4 of 4 Description: HISPACE - BASE FEED AND BASE FEED COVER HAB_311b INSERT CABLE INTO BASE FEED COVER NOTE: To be connected to Power Box. Please refer to Installation Guide No. HAB_311a for information.
- Page 380 G - WD Screw Pan Quad #12 x 7 / 8" Black Oxide (Ergotek # 720022) (E04-0087) x2 E - #8-18 x 1/2" Cross Square Comb. Self (E07-0012) x2 F - LE-Chain Cable Tie (Ergotek #740614) (B02-0545) x2 For Customer Support please contact Mid Gable product.support@teknion.com Shown...
- Page 381 height-adjustable bench Section: Date: May 2017 Page No: 2 of 3 Description: HAB_311c INSTALL E-CHAIN (END GABLE LOCATION) Underside View NOTE: Use Cable Tie Wrap to secure cable to Link (B) NOTE: E-Chain to be installed here for Mid Gable. Push cable inside E-Chain Underside View...
- Page 382 height-adjustable bench Section: Date: May 2017 Page No: 3 of 3 Description: HAB_311c INSTALL E-CHAIN (MID GABLE LOCATION) Cover for Mid Galbe Underside View Underside View STEP 2: Install Links at location shown. Fasten with Screws provided. Snap E-Chain to Links. Insert Cables through E-Chain and secure cables with Cable Tie Wrap as shown on Page 2.
- Page 383 height-adjustable bench Installation Guides Section: ELECTRICS Date: Aug 2017 Page No: 1 of 5 Description: HISPACE - UNDER WORKSURFACE COVER AND CABLE TRAY COVER HAB_311d Rev. No: 02 Hispace Under Worksurface Cover (HHBWUC) Part and Product Identification Hispace Cable Tray Cover (HHBFCC) Worksurface Wire Loom- Hispace (YESL) A1 - Tray Cover - Full (A16-3588) x qty.
- Page 384 height-adjustable bench Installation Guides Section: ELECTRICS Date: Aug 2017 Page No: 2 of 5 Description: HISPACE - UNDER WORKSURFACE COVER AND CABLE TRAY COVER HAB_311d INSTALL TRAY DIVIDER INSTALL HALF TRAY COVER STEP 1: Align the holes of Tray Divider with those on Frame and secure in place with Cross STEP 2: Lower Half Tray Cover on an angle to install.
- Page 385 height-adjustable bench Installation Guides Section: ELECTRICS Date: Aug 2017 Page No: 3 of 5 Description: HISPACE - UNDER WORKSURFACE COVER AND CABLE TRAY COVER HAB_311d INSTALL FULL TRAY COVER STEP 3: Lower Full Tray Cover on an angle to install.
- Page 386 height-adjustable bench Section: ELECTRICS Date: Aug 2017 Page No: 4 of 5 Description: HISPACE - UNDER WORKSURFACE COVER AND CABLE TRAY COVER HAB_311d INSTALL WIRE LOOMS INSTALL WIRE LOOMS NOTE: Only Worksurface, Power Module and Wire Loom Assembly is shown. NOTE: For Worksurface &...
- Page 387 height-adjustable bench Installation Guides Section: ELECTRICS Date: Aug 2017 Page No: 5 of 5 Description: HISPACE - UNDER WORKSURFACE COVER AND CABLE TRAY COVER HAB_311d HANG WIRING COVER FASTEN COVER Underside View Underside View NOTE: Worksurface and Wire Loom Assembly is not shown. STEP 6: Hang Wiring Cover off of Worksurface Channel.
- Page 388 G - Power Pole Cover Base (AEA23-E014-10) x2 P1 - 8-32 x 3/4" Quadrex For Ceiling Tile (FS8-32X3/4QRZ) x2 H - Upper Power Pole (AEA21-0200- P2 - 8-32 x 3/4" Quad ECPQ72) x1 For Solid Ceiling Tile (FS8X3/4QPTEKS) x2 For Customer Support please contact product.support@teknion.com...
- Page 389 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 2 of 9 Description: HISPACE - CEILING FEED AND POWER POLE HAB_312 INSTALL BRACKET INSTALL COVER NOTE: Make sure Legs are fully extended when installing cover. STEP 1: Install Bracket to Mid Gable Top Mounting Plate. STEP 2: Install Mid Gable Top Cover.
- Page 390 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 3 of 9 Description: HISPACE - CEILING FEED AND POWER POLE HAB_312 ATTACH LOWER EXTRUSION SECURE BOTTOM EXTRUSION STEP 3: Align and attach Lower Power Pole to Connecting Bracket as shown. STEP 4: Fasten Bracket to Lower Power Pole.
- Page 391 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 4 of 9 Description: HISPACE - CEILING FEED AND POWER POLE HAB_312 CEILING CUT OUT 3-1/2" 3-1/2" Power Pole length = distance + 3" STEP 5: Mark Power Pole position on the ceiling using Plum Bob Line. Cut 3-1/2" x 3-1/2" opening. Measure distance from top of the Lower Power pole Extrusion to the Ceiling. Add approximately 3"...
- Page 392 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 5 of 9 Description: HISPACE - CEILING FEED AND POWER POLE HAB_312 UPPER EXTRUSION ASSEMBLY INSTALL HALF TRAY COVER STEP 6: Insert Upper power Pole Extrusion inside ceiling cut-out (uncut edge down). Drop STEP 7: Drop Ceiling Feed cable down through ceiling cut-out down along the Power Pole.
- Page 393 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 6 of 9 Description: HISPACE - CEILING FEED AND POWER POLE HAB_312 ATTACH LOWER COVER ATTACH UPPER COVER STEP 8: Tuck cable and attach Power Pole Covers by engaging them into Lower Extrusion. STEP 9: Insert Upper Covers inside ceiling cut-out then engage into Upper Power Pole Extrusion.
- Page 394 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 7 of 9 Description: HISPACE - CEILING FEED AND POWER POLE HAB_312 ATTACH CEILING PLATES INSTALL HALF TRAY COVER WARNING : Do not connect to power source until installation is complete. All wire connections must be performed by a licensed electrician in accordance with applicable codes and regulations.
- Page 395 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 8 of 9 Description: HISPACE - CEILING FEED AND POWER POLE HAB_312 PLATES INSTALLATION NOTE: Temporarily remove plates, in order to push T-nuts into pre-drilled holes. Bring them back and fasten everything, as shown.
- Page 396 height-adjustable bench Installation Guides Section: ELECTRICS Date: May 2017 Page No: 9 of 9 Description: HISPACE - CEILING FEED AND POWER POLE HAB_312 PLUG TO POWER BOX NOTE: To be connected to Power Box. Please refer to Installation Guide No. HAB_311a for information.
- Page 397 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 8 Section: ELECTRICS HAB_321a Rev. 01 Navigate Power Module (HNBEPM), Navigate Receptacle Outlet (HNBERO), Navigate Power Harness (HNBEPH)
- Page 398 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 8 Section: ELECTRICS HAB_321a Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVIGATE POWER MODULE (HNBEPM) #8-18X1/2"CROSS SQUARE E07-0012 COMB.SELF COMMUNICATION PLUG OUTLET $OUTLET ASSY...
- Page 399 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 8 Section: ELECTRICS HAB_321a ASSEMBLE OUTLET HOUSING FASTEN SCREWS STEP 1: Place Outlet Housing over Power Module. STEP 2: Fasten Outlet Housing with screws provided.
- Page 400 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 8 Section: ELECTRICS HAB_321a ASSEMBLE RECEPTACLE FASTEN SCREWS STEP 3: Slide and engage Receptacles into Outlet Housing STEP 4: Fasten Receptacles with screws provided.
- Page 401 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 8 Section: ELECTRICS HAB_321a ASSEMBLE PLATES STEP 5: Attach the Bezel by snapping it onto the Housing. Then, attach Blank Plate onto the Bezel.
- Page 402 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 8 Section: ELECTRICS HAB_321a POWER MODULE ASSEMBLY - 1 STEP 6: Fasten Power Module assembly to underside of Cable Tray, make sure to line up holes of Cable Tray to holes from Brackets.
- Page 403 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 8 Section: ELECTRICS HAB_321a POWER MODULE ASSEMBLY - 2 M-Clip Hanger-Club Talk Bracket NOTE: Installer is to determine the layout for Hanger-Club Talk Bracket and M-Clip within the rectangular area. STEP 7: Assemble M-Clips and Hanger-Club Talk Brackets.
- Page 404 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 8 Section: ELECTRICS HAB_321a POWER HARNESS ASSEMBLY NOTE: M-Clips are not illustrated STEP 8: Connect pre-assembled Base Feed to Power Module. If Power Harness is specified, connect Power Harness to Power Module.
- Page 405 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 7 Section: ELECTRICS HAB_321b Rev. 01 Navigate Chicago Power Module (HNBEPMCH), Navigate Single-Sided Chicago Power Module (HNBEPMCH) NOTE: Single-Sided Power Module follows same step.
- Page 406 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 7 Section: ELECTRICS HAB_321b Part & Product Identification ITEM NO. PREVIEW DESCRIPTION PART NUMBER QTY. 1. CHICAGO POWER MODULE (HNBEPMCH) SHEET MATAL HOUSING, CHICAGO MPA16-E020 OUTLET BOX, NAVIGAT HAB Inner Housing Assembly JNECPB Screw,#8x1/2"...
- Page 407 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 7 Section: ELECTRICS HAB_321b LOOSEN SCREWS DISASSEMBLE INNER HOUSING STEP 1: Remove Screws from the Inner Housings to loosen. STEP 2: Disassemble Inner Housing Assembly.
- Page 408 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 7 Section: ELECTRICS HAB_321b MAKE WIRE CONNECTIONS FASTEN SCREWS NOTE: Licensed Electrician need to make the Wire Connections. Before attaching the Inner Housing to Metal Housing. NOTE: The Wires are hidden for illustration purpose.
- Page 409 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 7 Section: ELECTRICS HAB_321b ATTACH CHICAGO POWER MODULE TO WIRE CHANNEL NOTE: Base Feed is pre-assembled STEP 5: Fasten Chicago Power Module assembly to underside of Cable Tray, Make sure to lineup holes of cable tray to holes Brackets.
- Page 410 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 7 Section: ELECTRICS HAB_321b POWER MODULE ASSEMBLY - 1 WARNING! *Do not connect to power source until installation is complete. *Connection to the building power source must be performed by a licensed electrician. *Not following these instruction could result in damage and/or injury.
- Page 411 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 7 Section: ELECTRICS HAB_321b POWER MODULE ASSEMBLY - 2 M-Clip Hanger-Club Talk Bracket NOTE: Installer is to determine the layout for Hanger-Club Talk Bracket and M-Clip within the rectangular area. STEP 7: Assemble M-Clips and Hanger-Club Talk Brackets.
- Page 412 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 10 Section: ELECTRICS HAB_321c Rev. 01 Navigate Base Feed (HNBEBF), Navigate Base Feed Cover (HNBEBC), Navigate Chicago Base Feed (HNBEBFCH), Navigate Split Base Feed (HNBEBFS)
- Page 413 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 10 Section: ELECTRICS HAB_321c Part & Product Identification PART PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER 1. Base Feed - End Condition (HNBEBF_E) x1 5. Chicago Base Feed (HNBEBFCH_M) x1 Base Feed w HNBEBF-END Chicago Base...
- Page 414 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 10 Section: ELECTRICS HAB_321c INSTALL SPLIT BASE FEED INSTALL BOX COVER (OPTIONAL) NOTE: Cable Channel is hidden for Illustration Purpose. Pilot Holes Pilot Holes NOTE: Connect the Base Power Harness (HNBEPH) (24") Feed to the Power Harness.
- Page 415 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 10 Section: ELECTRICS HAB_321c INSTALL BASE FEED ATTACH BASE FEED & INSTALL CABLE TRAY NOTE: Installation for Chicago Base Feed (HNBEBFCH) is Power Harnes (HNBEPH) (24") similar to Base Feed (HNBEBF). NOTE: HNBEBF is Shown.
- Page 416 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 10 Section: ELECTRICS HAB_321c INSTALL BASE FEED COVER LOOSEN SCREW STEP 4: Fasten Bracket to underside of Stretch bar. STEP 5: Loosen screw to allow the cover bracket to adjust the height.
- Page 417 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 10 Section: ELECTRICS HAB_321c ADJUST COVER TIGHTEN SCREW Finish Floor STEP 6: Adjust cover so it rest on Finish Floor. STEP 7: Tighten screw to Secure it.
- Page 418 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 10 Section: ELECTRICS HAB_321c INSERT CABLE INTO BASE FEED COVER Underside View STEP 8: Insert Base Feed cable into Base Feed Cvoer as shown on illustration above.
- Page 419 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 10 Section: ELECTRICS HAB_321c ORIENTATION OF BASE FEED (OPTIONAL) Parallel Orientation Vertical Orientation STEP 9a: Remove Screws and Determine the orientstion for Mid Bracket.
- Page 420 height-adjustable bench Installation Guides Date: Sept 2019 Page: 9 of 10 Section: ELECTRICS HAB_321c INSTALL MID BASE FEED NOTE: Wire channel and other elctrics are Hidden for illustration purposes. STEP 9b: Fasten Middle Bracket and Base Feed. Install assembly to Stretcher bar as shown. Installation for Chicago Power Module is Similar.
- Page 421 height-adjustable bench Installation Guides Date: Sept 2019 Page: 10 of 10 Section: ELECTRICS HAB_321c NOTE Wire Management M-Clips NOTE: Installer is to Determine the layout for the data, wire managemnet bracket and m-clips in the hatched area.
- Page 422 height adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 9 Section: ELECTRICS HAB_322a Rev. 01 Navigate Ceiling Feed (HNBECF), Navigate Chicago Ceiling Feed (HNBECFCH), Navigate Power Pole - End(HNBEPP_E) NOTE: Parts of the Frame are hidden for illustration purpose.
- Page 423 height adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 9 Section: ELECTRICS HAB_322a Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 2. Power Pole - End (HNBEPP_E) x1 Ceiling Feed HNBECF AEA23-E014- Upper Pole Cover...
- Page 424 height adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 9 Section: ELECTRICS HAB_322a INSTALL BRACKET TO POWER POLE ALLIGN LOWER POWER POLE TO HAB FRAME 2.10 2.10 (Do Not Fully Tighten) HAB Frame Stretcher Bar STEP 1:Fasten Bracket to Lower Power Pole Extrusion. Do not fully tighten as bracket needs STEP 2: Bring Lower Power Pole Extrusion underneath Height Adjustable Bench (HAB) to slide up or down.
- Page 425 height adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 9 Section: ELECTRICS HAB_322a SECURE BOTTOM EXTRUSION TO FRAME TIGHTEN BRACKET TO LOWER POWER POLE Underside View 2.10 STEP 3: Use Screws and washers Provided to fasten Power Pole Bracket to HAB Frame as STEP 4: Make sure lower pole ectrusion sits on the floor &...
- Page 426 height adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 9 Section: ELECTRICS HAB_322a CEILING CUT OUT INSTALL UPPER EXTRUSION Top Portion Shown 3 1/2" 3 1/2" Power Pole length Bottom Portion Shown =distance + 3" STEP 5:Mark Power Pole position on the ceiling using Plum Bob line. Cut 3 1/2" x 3 1/2" STEP 6: Insert Upper Power Pole extrusion inside ceiling cut-out (Uncut edge down).
- Page 427 height adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 9 Section: ELECTRICS HAB_322a INSTALL CEILING FEED INSTALL CEILING FEED STEP 7: Drop Ceiling Feed cable down through ceiling cut-out down along the Power Pole. STEP 8: Feed cable underneath Bracket. Slide junction box bracket inside Power Pole Extrusion.
- Page 428 height adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 9 Section: ELECTRICS HAB_322a ATTACH LOWER COVER ATTACH UPPER COVER STEP 9: Tuck Cable and attach Power Pole Covers by engaging them into Lower Extrusion. STEP 10: Insert Upper Covers inside ceiling cut-out then engage into Upper Power Pole Extrusion.
- Page 429 height adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 9 Section: ELECTRICS HAB_322a ATTACH CEILING PLATE & DRILL HOLES INSTALL PLATES 2.11 NOTE: Wire Channel is hiddden for Illustration Purpose. 2.10 STEP 11: Attach Ceiling Plates to Power Pole under the Ceiling. Drill holes for T-Nuts using STEP 12: Push T-nuts inside holes from the Top of the Ceiling tile.
- Page 430 height adjustable bench Installation Guides Date: Sept 2019 Page: 9 of 9 Section: ELECTRICS HAB_322a COVER PLATES INSTALL Backside View STEP 13: Expose the adhesive of the double sided tape on the back of the Cover Plate and slide Cover Plate from the top to cover cut-out on the side of Power Pole.
- Page 431 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 10 Section: ELECTRICS HAB_322b Rev. 1 Navigate Power Pole - Mid (HNBEPP_M), Navigate Power Pole Single Sided - Mid (HNBEPP_S), Navigate Ceiling Feed (HNBECF) & Navigate Chicago Ceiling Feed (HNBECF) NOTE: HNBEPP_M is shown as an Example.
- Page 432 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 10 Section: ELECTRICS HAB_322b Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER AEA23-E014- Upper Pole Cover Ceiling Feed HNBECF Ceiling plate for MPA15-2666 Chicago Ceiling EPQE...
- Page 433 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 10 Section: ELECTRICS HAB_322b Part & Product Identification ITEM PART ITEM PART PREVIEW DESCRIPTION QTY. PREVIEW DESCRIPTION QTY. NUMBER NUMBER 3. Power Pole - Mid (HNBEPM_S) x1 Lower Pole Body- Mid AEA21-0200-09 Connecting Bracket MPA15-E064...
- Page 434 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 10 Section: ELECTRICS HAB_322b CONNECT BRACKET ASSEMBLY ATTACH LOWER EXTRUSION NOTE: Cable Channels are Underside View Hidden for Illustration Purpose. Opposite Side NOTE: Cable Channels are NOTE: Install Connection Hidden for Illustration Purpose. Bracket then proceed Mid- Gable-Installation.
- Page 435 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 10 Section: ELECTRICS HAB_322b MOUNT CONNECTING BRACKET (SINGLE SIDED) ATTACH LOWER EXTRUSION (SINGLE SIDED) Frame Link NOTE: Step 1b and 2b are only for the Installation of Power Pole Single Sided - Mid Condition.
- Page 436 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 10 Section: ELECTRICS HAB_322b SECURE BOTTOM EXTRUSION CEILING CUT OUT NOTE: Frame Legs are hidden for illustration purpose. Power Pole Length = distance + 3" STEP 3: Fasten Bracket to Lower Power Pole STEP 4: Mark Power Pole position on the cieling using Plum Bob line.
- Page 437 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 10 Section: ELECTRICS HAB_322b INSTALL UPPER EXTRUSION CEILING FEED ASSEMBLY NOTE: Cable Channels are Hidden for Illustration Purpose. STEP 5: Insert Upper Power Pole Extrusion inside Ceiling Cut-Out (Uncut edge down). STEP 6: Drop Ceiling Feed cable down through ceiling Cut-out down along the Power Pole Drop Power Pole Upper Extrusion on the Top of Lower Extrusion and Connect them Slide junction box Inside the Power Pole Extrusion.
- Page 438 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 10 Section: ELECTRICS HAB_322b CABLE MANAGEMENT NOTE: Cable Channel are Hidden for Illustration Purpose. Mid Gable Top Cover Cable Channel STEP 7: Open Mid-Gable Top Cover and Connect Ceiling Feed and fish to the underside of the Cable Channel.
- Page 439 height-adjustable bench Installation Guides Date: Sept 2019 Page: 9 of 10 Section: ELECTRICS HAB_322b ATTACH LOWER COVER ATTACH UPPER COVER NOTE: Frame Legs and Cable Channel are hidden for Illuatration Purpose. Cieling STEP 8: Tuck cable and attach Power Pole Covers by engaging them into Lower Extrusion. STEP 9: Insert Upper Covers inside ceiling cut-out then engage into Upper Power Pole Extrusion.
- Page 440 height-adjustable bench Installation Guides Date: Sept 2019 Page: 10 of 10 Section: ELECTRICS HAB_322b ATTACH CEILING PLATE & DRILL HOLES SECURE PLATES 2.10 WARNING:Don't connect to power source untill installation is copmlete. All wire connections must be performed by a licensed electrician in accordance with applicable codes and regulations.
- Page 441 height adjustable bench Installation Guides Section: ELECTRICS Date: Sept 2019 Page No: 1 of 6 Description: NAVIGATE POWER CONSERVATION SYSTEM HAB_323 Rev. No: 01 Power Conservation System (HNBEPC) Part and Product Identification A - #8 x 3/4 Slf Tping Scrw FS8x.075QPTEKS x4 B - Control Box Control Box-12.11 x1...
- Page 442 height adjustable bench Installation Guides Section: ELECTRICS Date: Sept 2019 Page No: 2 of 6 Description: NAVIGATE POWER CONSERVATION SYSTEM HAB_323 INSTALL POWER CONSERVATION SYSTEM CONNECT POWER CONSERVATION SYSTEM STEP 1: Install Power Conservation System beneath Cable Channel using Self Tapping Screws STEP 2: Connect Power Conservation System to Base Feed and Power Module...
- Page 443 height adjustable bench Installation Guides Section: ELECTRICS Date: Sept 2019 Page No: 3 of 6 Description: NAVIGATE POWER CONSERVATION SYSTEM HAB_323 MOUNT WORKSURFACES MOUNT SENSORS STEP 3: Mount Worksurfaces STEP 4: Mount Sensors using Wood Screws...
- Page 444 height adjustable bench Installation Guides Section: ELECTRICS Date: Sept 2019 Page No: 4 of 6 Description: NAVIGATE POWER CONSERVATION SYSTEM HAB_323 DESCRIPTION R 8.0' Note: Sensor placement will be based on location of User, Length of CAT3 Cable, and Desk Configuration...
- Page 445 height adjustable bench Installation Guides Section: ELECTRICS Date: Sept 2019 Page No: 5 of 6 Description: NAVIGATE POWER CONSERVATION SYSTEM HAB_323 CONNECT SENSOR TO POWER CONSERVATION SYSTEM Note: Press CAT3 Cable into Wire Manager STEP 5: Connect Sensor to Sensor using CAT3 Cable...
- Page 446 height adjustable bench Installation Guides Section: ELECTRICS Date: Sept 2019 Page No: 6 of 6 Description: NAVIGATE POWER CONSERVATION SYSTEM HAB_323 SENSOR GANGING STEP 6: Connect Sensors together using CAT3 Cable...
- Page 447 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 8 Section: ELECTRICS HAB_324 Rev. 00 Navigate Power Pole (HNBEPP), Navigate Ceiling Feed (HNBECF)
- Page 448 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 8 Section: ELECTRICS HAB_324 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1. Navigate Power Pole (HNBEPP) MOUNTING BRKT MID 120 MPA16-E042 LOWER POLE HAB POWER AEA23-E014...
- Page 449 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 8 Section: ELECTRICS HAB_324 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1/4-20 5/8 " FS1-4-20X5- LONG SCREW 8RPM FOR ECPQ Screw,#8x1/2" RND, ROB, FS8 x 1-2-RRB BRIGHT ZINC...
- Page 450 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 8 Section: ELECTRICS HAB_324 INSTALL BRACKETS ATTACH LOWER EXTRUSION 1.10 STEP 1: Install Bracket to Mid Gable Top Mounting Plate. STEP 2: Align and attach Lower Power Pole to Connecting Bracket as shown.
- Page 451 height-adjustable bench Installation Guides Date: Sept 2019 Page: 5 of 8 Section: ELECTRICS HAB_324 ATTACH LOWER EXTRUSION FASTEN SCREWS STEP 3: Insert Upper Power Pole Extrusion inside ceiling cut-out (uncut edge down). Drop STEP 4: Connect Upper and Lower Extrusion together using Connection Plate and Screws. Power Pole Upper Extrusion on the top of Lower Extrusion.
- Page 452 height-adjustable bench Installation Guides Date: Sept 2019 Page: 6 of 8 Section: ELECTRICS HAB_324 JUNCTION BOX INSTALLATION WIRE MANAGEMENT NOTE: Junction Box Wire not shown STEP 5: Slide Junction Box Bracket inside the Power Pole Extrusion. STEP 6: Drop Ceiling Feed cable down through ceiling cut-out down along the Power Pole.
- Page 453 height-adjustable bench Installation Guides Date: Sept 2019 Page: 7 of 8 Section: ELECTRICS HAB_324 ATTACH LOWER COVER ATTACH UPPER COVER STEP 7: Tuck cable and attach Power Pole Covers by engaging them into Lower Extrusion STEP 8: Insert Upper Covers inside ceiling cut-out then engage into Upper Power Pole Extrusion.
- Page 454 height-adjustable bench Installation Guides Date: Sept 2019 Page: 8 of 8 Section: ELECTRICS HAB_324 ATTACH CEILING PLATES FASTEN SCREWS 1.11 1.12 1.13 STEP 9: Attach Ceiling Plates to Power Pole under the ceiling. STEP 10: Push T-nuts inside holes from the top of the ceiling tile. Wrap Cover plates around the Power Pole and fasten using hardware provided.
- Page 455 height-adjustable bench Installation Guides Date: Sept 2019 Page: 1 of 4 Section: ELECTRICS HAB_325 Rev. CENTER ELECTRICAL GROMMET (HNBECEG)
- Page 456 height-adjustable bench Installation Guides Date: Sept 2019 Page: 2 of 4 Section: ELECTRICS HAB_325 Part & Product Identification ITEM ITEM PREVIEW DESCRIPTION PART NUMBER QTY. PREVIEW DESCRIPTION PART NUMBER QTY. 1. NAVIGATE CENTER ELECTRICAL GROMMET (HNBECEG) XEPB-PD- POWER MODULE USBAC GROMMET YEAG01-RAW COVER...
- Page 457 height-adjustable bench Installation Guides Date: Sept 2019 Page: 3 of 4 Section: ELECTRICS HAB_325 ASSEMBLE ATTACHMENTS MOUNT POWER MODULE STEP 1: Assemble Plate, Bracket Mount, and Power Module with screws provided. STEP 2: Mount Power Module as shown above.
- Page 458 height-adjustable bench Installation Guides Date: Sept 2019 Page: 4 of 4 Section: ELECTRICS HAB_325 PLACE GROMMET COVER STEP 3: Place the Grommet Cover as shown above.
Need help?
Do you have a question about the Navigate Series and is the answer not in the manual?
Questions and answers