Related Manuals for Aerial AB 1000 Series
Summary of Contents for Aerial AB 1000 Series
- Page 1 Instruction manual _____________________________________ Sound box with high pressure blower Series AB 200 / AB 500 / AB 1000 _____________________________________ valid: 12-2010 page 1 of 12...
-
Page 2: Table Of Contents
Index Scetches 1.1. front of AB 200 1.2. front of AB 500 / AB 1000 General advice Mode of functioning and features 4 - 5 Safety 5 - 6 Installation and transport Operation 6.1. electrical connection 6.2. Putting into operation 6.3. -
Page 3: Scetches
1.Scetches 1.1 Front of AB 200 (a) Power counter (i) grip, hinged (kW/h) (b) device socket (max. 8 A) (d) On-/Off-switch, iluminated ( e) fuse for device socket ( 8 A) ( c) Ammeter (see 6.3) (looks similar) (f) cable keeper with main cable (app. -
Page 4: General Advice
2.General advice You have bought a high pressure blower with sound box (in following mentioned as “sound box”) made by AERIAL thus deciding for a proven quality product "Made in Germany". If nevertheless complications should occur, you will find some advice hereinafter how to eliminate such difficulties as quickly as possible. -
Page 5: Safety
The sound box is furnished also with a power counter ( ( a) shows kWh from the very first start of the unit) and a device socket (b) max. 8 A). During the using of the sound box in connection with an adsorption dryer, the electrical supply of the dryer can occur via this device socket. -
Page 6: Installation And Transport
5. Installation and transport The AB-sound boxes has been designed for mobile application. For installation and transport, the following instructions must be adhered to: The sound boxes must be installed so that the air can pass through it without any obstacles. The side, reverse and front wall of the case must not be covered! Before any change of the place of installation, the appliance is to be switched off by the ON-OFF-switch, the mains plug is to be removed from the socket! The sound box must be moved only using the provided handle system! -
Page 7: Putting Into Operation
Attention! Exceeding the maximally permissible operating currents leads to shutdown of the blower and consequently, stops the drying out. For further questions please contact your supplier or AERIAL. page 7 of 12... -
Page 8: Operating Conditions
In the case of doubtful operating conditions it is recommended to contact the Technical Department of Messrs. AERIAL or a specialized dealer. Using the sound box under inadequate operating conditions will entail that the warranty becomes null and void. -
Page 9: Service & Maintenance
If subjects should be in the side channel blower (stones etc.), the side channel blower must be dismantle and must be repaired by an authorized specialized firm or the AERIAL GmbH. Switch off the unit and pull the plug from the socket. -
Page 10: Disposal
If you have any questions regarding defects and malfunctions of AERIAL-air dryers we recommend get in touch with your supplier. The producer AERIAL GmbH you reach under 0049-40-526879-0 or www.aerial.de 11.Disposal... -
Page 11: Ab 200
12. E-circuit 12.1. AB 200 12.2. AB 500 / AB 1000 Leistungzähler Netzkabel 000000,00 KW/h Main cable M1 – high pressure blower M2 – cooling fan A – Ammeter G – device socket K1 – power relay F1 – Fuse for device socket page 11 of 12... -
Page 12: Manufacturer´s Declaration
13. Manufacturer´s declaration (EU-directive 2006/42/EG) (EU-directive 2004/108/EG) (EU-directive 2006/95/EG) Manufacturer: AERIAL GmbH - Systeme zur Luftbehandlung Oststr. 128, D-22844 Norderstedt Product description: sound box AB 200 with high pressure blower HB 2 Sound box AB 500 with high pressure blower HB 3...
Need help?
Do you have a question about the AB 1000 Series and is the answer not in the manual?
Questions and answers