Table of Contents
Related Manuals for Böning AHD 1215 Series
Summarization of Contents
General Information
About these Installation Instructions
Details the purpose and scope of the installation manual, and its relation to the operation manual.
Explanation of Symbols
Defines hazard symbols (DANGER, WARNING, CAUTION) and tips used throughout the manual.
Limitation of Liability
Outlines the manufacturer's responsibilities and limitations regarding product use and damages.
Safety
Operator's Responsibilities
Specifies the operator's duties regarding workplace safety, risk assessment, and personnel training.
Personnel Requirements
Defines the qualifications and conditions for personnel performing installation and operation tasks.
Introduction
Required Tools
Lists all necessary tools and hardware components for the installation of panel PCs and displays.
Installation Location
Provides guidance on selecting an appropriate installation location and angle for optimal viewing.
Preparation
Details the necessary preparation steps for the mounting surface to ensure proper installation.
Viewing Angle AHD 1219 X / AHD 1119 X
Illustrates the optimal viewing angles for the AHD 1219 X and AHD 1119 X panel PCs.
Viewing Angle AHD 1215 X / AHD 1115 X
Illustrates the optimal viewing angles for the AHD 1215 X and AHD 1115 X panel PCs.
Console Installation
Explains critical considerations for installing the devices within a console, focusing on cooling.
Panel Cutouts and Drill Holes
Panel Cutout and Drill Holes AHD 1219 X / AHD 1119 X
Provides precise dimensions for panel cutouts and drill hole placement for 19-inch devices.
Panel Cutout and Drill Hole AHD 1215 X / AHD 1115 X
Provides precise dimensions for panel cutouts and drill hole placement for 15-inch devices.
Installing the Panel PCs / Displays
Marking the Panel Cutouts and Drill Holes
Guides users on using the mounting frame to mark cutouts and drill hole locations accurately.
Outdoor Installation
Offers advice for outdoor installation, focusing on maintaining IP 66 protection class and surface sealing.
Installing the Device
Details the process of placing the device into the panel cutout, ensuring bolts are not stressed.
Securing the Fixture Nuts
Explains the correct sequence and method for tightening fixture nuts to prevent damage.
Tightening Pattern
Illustrates the specific pattern to be followed when tightening mounting nuts for secure installation.
Earthing
Emphasizes the importance of proper earthing for device protection and system error prevention.
Need help?
Do you have a question about the AHD 1215 Series and is the answer not in the manual?
Questions and answers