1. Manuals
  2. Brands
  3. Sony Manuals
  4. Monitor
  5. CPD-100ES
  6. Service manual

Sony CPD-100ES - 15" CRT Display Service Manual

Service manual
Hide thumbs Also See for CPD-100ES - 15" CRT Display:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL

Picture Tube
0.25 mm aperture grill pitch
15 inches measured diagonally
90-degree deflection
Video image area
(14" maximum viewing image)
Approx. 284 x 212 mm (w/h)
1/4
(11
x 8
Logical resolution
Horizontal: Max. 1280 dots
Vertical: Max. 1024 lines
Physical resolution
Horizontal: Max. 1024 dots
Vertical: Max. 768 lines
MICROFILM
Southern Hemisphere Model
SPECIFICATIONS
Standard image area
Deflection frequency
AC input voltage / current
3/8
inches)
Dimensions
Mass
Design and specifications are subject to change without notice.
TRINITRON
®
—
CPD-100ES
Equator Model
X2R
COLOR COMPUTER DISPLAY
—
1
CPD-100ES
CPD-100ES
Chassis No.SCC-L15B-A
CHASSIS
Approx. 270 x 202 mm (w/h)
(10
3/4
x 8 inches)
Horizontal: 30 to 70 KHz
Vertical: 50 to120 Hz
100 to 120 V, 50-60 Hz, 1.8 A
220 to 240 V, 50-60 Hz, 1.0 A
368 x 373 x 384.5 mm (w/h/d)
1/2
3/4
1/4
(14
x 14
x 15
inches)
Approx. 14.0kg (30 lb 14 oz)

Advertisement

Table of Contents
loading

Related Manuals for Sony CPD-100ES - 15" CRT Display

Summary of Contents for Sony CPD-100ES - 15" CRT Display

  • Page 1: Service Manual

    CPD-100ES CPD-100ES SERVICE MANUAL CPD-100ES Southern Hemisphere Model Equator Model Chassis No.SCC-L15B-A CHASSIS SPECIFICATIONS Picture Tube 0.25 mm aperture grill pitch Standard image area Approx. 270 x 202 mm (w/h) 15 inches measured diagonally x 8 inches) 90-degree deflection Deflection frequency Horizontal: 30 to 70 KHz Video image area (14"...
  • Page 2 CPD-100ES POWER SAVING FUNCTION This monitor meets the power saving guidelines set The Power Saving function will automati- CAUTION: by the EPA Energy Star Program as well as the more cally put the monitor into Active-off state stringent TC092 guidelines (NUTEK). It is capable of if the power switch is turned on without reduced power consumption when used with a com- any video signal input.

  • Page 3: Table Of Contents

    CPD-100ES TABLE OF CONTENTS Section Title Page 1. GENERAL ................... 4 2. DISASSEMBLY 2-1. Cabinet Removal ............7 2-2. Service Position ...............7 2-3. D Board Removal ............7 2-4. Picture Tube Removal ........... 8 3. SAFETY RELATED ADJUSTMENT ......... 9 4. ADJUSTMENTS ................

  • Page 4: General

    VESA 1 0 0 For the customers using the Windows ®4) nstall the new model information of the Sony computer display 3 1 . 5 kHz/70Hz Apple computer from “Windows95 Monitor Information Disk” into your PC. (To to video output For vertical adjustment install the file, refer to the attached “About the Windows95 Monitor...

  • Page 5: Adjusting The Picture Size

    Adjustments Press the ¨ >/. buttons. Adjusting the Picture Size Resetting the Adjustment Setting the Color Temperature > . . .to rotate clockwise Data to Factory-preset Levels ..to rotate counterclockwise The adjustment data becomes the individual setting for each The selected color temperature becomes the common setting input signal received.

  • Page 6: Troubleshooting

    20 minutes for the best result. the u POWER switch once to activate the Auto- degauss cycle*. If the problem persists, call your authorized Sony dealer from a location near your monitor. Picture is flickering Note the model name and the serial number of your monitor.

  • Page 7: Disassembly

    CPD-100ES SECTION 2 DISASSEMBLY 2-1. CABINET REMOVAL 2-2. SERVICE POSITION Cabinet A board Screw cover Screw cover D board Four screws (BVTP 4 x 16) 2-3. D BOARD REMOVAL A board Five screws (BVTP 3 x 12) One screw (BVTT 4 x 8) Cable stopper Two screws (BVTP 3 x 12)

  • Page 8: Picture Tube Removal

    CPD-100ES 2-4. PICTURE TUBE REMOVAL Demagnetization coil Two screws (BVTP 4 x 16) Tension spring A board Neck assy Deflection yoke Two degaussing Tow degaussing coil holders coil holders Picture tube Four screws (Tapping screw 5) Stand assy (D board) Anode cap Two degaussing Tow degaussing...

  • Page 9: Safety Related Adjustment

    CPD-100ES SECTION 3 SAFETY RELATED ADJUSTMENT b) HV Hold-Down Check When replacing parts shown in the table below, the 1) Using an external DC Power supply, apply the following operational checks must be performed as a safety precaution against X-rays emissions from the unit. voltage shown below between cathode of D511 on "D"...

  • Page 10: Adjustments

    CPD-100ES SECTION 4 ADJUSTMENTS Connect the communication cable of the connector located on the D board on the monitor. Run the service software and then follow the instructions. 1-690-391-21 A-1500-819-A 3-702-691-01 Interface Unit Connector Attachment IBM AT Computer To BUS CONNECTOR as a Jig D-sub mini Din...
  • Page 11 CPD-100ES Receive White cross-hatch. <Zero Position NECK Ass'y> Adjust HMC and VMC at six-pole magnet. Purity 4-Pole Mg 6-Pole Mg < 6 Pole Magnet> DY XBV Dot adjustment Receive R.B. cross-hatch. Adjust XBV at DY four-pole magnet. XBV Correction Vertical and Horizontal Position and Size a When Specification Less than...

  • Page 12: Circuit Boards Location

    CPD-100ES 5-2. CIRCUIT BOARDS LOCATION 5-3. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS Note: • All capacitors are in F unless otherwise noted. pF: • When replacing parts shown in the table below, 50 WV or less are not indicated except for electrolytic. be sure to perform the safety related adjustment.

  • Page 15: Semiconductors

    5-4. SEMICONDUCTORS MTZJ-T-77-4.7B EGP20DPKG23 UF3ML-6505 2SC5022-02 EGP30D TDA6103Q SB340L-6489 5TUZ52 MTZJ-T-77-5.6B EGP10GPKG23 RGP02-20EL-6394 2SA1037K-T-146-QR CATHODE MTZJ-T-77-8.2B 1SS133T-77 CATHODE 3DL41A (LC6-15) CATHODE RB441QT-77 HSS 82 CATHODE RD27ES-T1B2 MTZJ-T-77-10B MTZJ-T-77-18 RD4.7ES-T1B2 RD5.6ES-T1B2 1SS119-25TD CATHODE ANODE ANODE ANODE ANODE ANODE LM1281 SN74HCT02AN SNY425 TDA9105S VPC5023CS-095 ST7272N5B1/CKO...

  • Page 16: Exploded Views

    CPD-100ES SECTION 6 EXPLODED VIEWS • Items with no part number and no • Items marked " * " are not stocked The components Identified by shading and mark ¡ ¡ ¡ ¡ ¡ a re critical for safety. description are not stocked because since they are seldom required for routine they are seldom required for routine service.

  • Page 17: Packing Materials

    CPD-100ES 6-2. PACKING MATERIALS REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 3-860-654-01 MANUAL, INSTRUCTION 52 * 4-060-187-01 CUSHION (TOP) ASSY. ¡ 1-765-717-11 CORD SET, POWER (EQ) ¡ 1-558-481-11 CORD SET, POWER (SH) 54 * 4-060-194-01 BAG, POLYETHYLENE 55 * 4-060-192-01...

  • Page 18: Electrical Parts List

    CPD-100ES SECTION 7 ELECTRICAL PARTS LIST RESISTORS Note: The components identified by in this manual • have been carefully factory-selected for each All resistors are in ohms set in order to satisfy regulations regarding X- The components Identified by shading •...
  • Page 19 CPD-100ES Note: Note: The components Identified by shading Les composants identifies per un trame et and mark ¡ ¡ ¡ ¡ ¡ une marque ¡ ¡ ¡ ¡ ¡ sont critiques pout la are critical for safety. Replace only with part number specified. securite.
  • Page 20 CPD-100ES Note: Note: The components Identified by shading Les composants identifies per un trame et and mark ¡ ¡ ¡ ¡ ¡ une marque ¡ ¡ ¡ ¡ ¡ sont critiques pout la are critical for safety. Replace only with part number specified. securite.
  • Page 21 CPD-100ES Note: Note: The components Identified by shading Les composants identifies per un trame et and mark ¡ ¡ ¡ ¡ ¡ une marque ¡ ¡ ¡ ¡ ¡ sont critiques pout la are critical for safety. Replace only with part number specified. securite.
  • Page 22 CPD-100ES Note: Note: Les composants identifies per un trame et The components Identified by shading une marque ¡ ¡ ¡ ¡ ¡ sont critiques pout la and mark ¡ ¡ ¡ ¡ ¡ are critical for safety. securite. Ne les remplacer que par une Replace only with part number specified.
  • Page 23 CPD-100ES Note: Note: The components Identified by shading Les composants identifies per un trame et and mark ¡ ¡ ¡ ¡ ¡ une marque ¡ ¡ ¡ ¡ ¡ sont critiques pout la are critical for safety. Replace only with part number specified. securite.
  • Page 24 CPD-100ES Note: Note: Les composants identifies per un trame et The components Identified by shading une marque ¡ ¡ ¡ ¡ ¡ sont critiques pout la and mark ¡ ¡ ¡ ¡ ¡ are critical for safety. securite. Ne les remplacer que par une Replace only with part number specified.
  • Page 25 CPD-100ES Note: Note: The components Identified by shading Les composants identifies per un trame et and mark ¡ ¡ ¡ ¡ ¡ une marque ¡ ¡ ¡ ¡ ¡ sont critiques pout la are critical for safety. Replace only with part number specified. securite.
  • Page 26 CPD-100ES Note: Note: The components Identified by shading The components identified by in this manual have been and mark ¡ ¡ ¡ ¡ ¡ are critical for safety. carefully factory-selected for each set in order to satisfy regu- lations regarding X-ray radiation. Should replacement be Replace only with part number specified.
  • Page 27 8-734-827-05 CRT 15FR2 (M36LDJ15X) (EQ) ¡ 8-734-829-05 CRT 15FR2 (M36LDJ15X) (SH) 3-860-654-01 MANUAL, INSTRUCTION ¡ X-4033-083-1 TRANSFORMER ASSY, FLYBACK (NX-4130//J1E) Sony Corporation English Sony Technology Center, San Diego 97IJ74208-1 Product Quality Division Printed in U.S.A. 9-978-824-01 Service Promotion Department © 1997.9 — 40 —...

Table of Contents