Download Print this page
HANSCRAFT Evolution 40 Installation Instructions Manual

HANSCRAFT Evolution 40 Installation Instructions Manual

Pool heat pump

Advertisement

Advertisement

loading
Need help?

Need help?

Do you have a question about the Evolution 40 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Specifications
2.1 Horizontal Design, R410A, HEATING ONLY
Details specifications for horizontal design models using R410A, heating only.
Installation
4.1 Installation Illustration
Illustrates the installation process of the pool heat pump within a water system.
4.2 Installation Guidelines
Covers essential guidelines for unit placement, ventilation, power, and bypass installation.
4.3 Chemical Handling & Installation Tips
Covers chemical installation, optimal distance, freeze prevention, condensation, and bypass requirements.
Electrical Wiring
Evolution 25 / Evolution 40 Wiring Diagram
Provides the electrical wiring diagram for Evolution 25 and 40 models.
Evolution 60 Wiring Diagram
Provides the electrical wiring diagram for the Evolution 60 model.
Initial Startup
Startup Procedure
Step-by-step guide for initial startup after installation is completed.
Water Flow Switch and Time Delay
Explains the water flow switch function and the 3-minute time delay feature.
Operation
7.1 LED Wire Controller Overview
Describes the components and functions of the LED wire controller interface.
7.2 Setting Operation Parameters
Guides on how to set various operating parameters through the controller.
7.3 Checking Current Status
Explains how to check the current operational status and various temperatures.
7.4 Water Temperature Setting & 7.5 Locking Setting
Details water temperature adjustment and parameter locking/unlocking functions.
7.6-7.10 Timer and Reset Functions
Covers time setting, timer functions, and system reset procedures.
7.4 RUNNING DATA SETTING (Parameter Table)
Comprehensive table detailing all running parameters, ranges, and defaults.
Maintenance
Maintenance Procedures
Covers regular checks for water supply, filtration, unit cleanliness, and winterization.
Troubleshooting Guide
9.1 Error Code Display on LED Wire Controller
Explains error codes displayed on the LED controller and their solutions.
9.2 Other Malfunctions and Solutions
Addresses common malfunctions not indicated by error codes and their resolutions.
Exploded Diagram and Parts List
Parts List
Lists all parts of the heat pump unit with their corresponding numbers.