Related Manuals for PARRY Snack Series
Summary of Contents for PARRY Snack Series
- Page 1 Instruction Manual Extraction Canopy Range Available as: Snack Type Range General Type Range Titan Type Range Condensation Canopy Range...
- Page 2 Enjoy the catalogue. And, remember, if you can’t find precisely the product or fit you’re looking for, you can use our bespoke service and we’ll make it for you. If you have comments or questions, we’d be pleased to hear from you. Contact us by calling 01332 875544 or visiting www.parry.co.uk/contact-us.
-
Page 3: Table Of Contents
Contents Contents Contents ..........................3 Product Overview ......................... 4 Safety Instructions ........................ 6 Installation Instructions ......................6 Cleaning Instructions ......................10 Fault Finding ........................11 Service Information ......................11 Wiring diagram ........................12 ............................13 Fixing Diagram ........................14 Parts List ..........................15 Warranty Information ...................... -
Page 4: Product Overview
Product Overview Product Overview The Parry range of canopies has been designed to demystify the process of installing extraction above commercial catering equipment. The standard three designs of extraction canopy we offer can be purchase in packs with either internal fans or external fans. The packs include the associated flanges and speed controller to suit the fans spec for the length of canopy so you can rest assured that you have the key components needed to install the canopy. - Page 5 Product Overview TITAN TYPE DETAIL CANOPY External Dimensions 1000/1200/1500/1800/2100/2400mm (w) x 1200mm (d) x 750mm (h) Removable drip tray Fans packs available Internal or external Filters All units provided with baffle filters Construction Stainless steel CONDENSATE DETAIL CANOPY External Dimensions 1000/1200/1700/2100mm (w) x 1100mm (d) x 500mm (h) Integral drip tray...
-
Page 6: Safety Instructions
Please consult HVCA Specification DW/172 and current local regulations, when specifying a canopy for a room. Parry cannot specify extraction equipment or ducting due to the numerous factors that influence the selection of equipment for a certain environment. Please ensure that you have checked that the canopy you select will have adequate air flow to extract the gases from the equipment that you propose to fit underneath it. - Page 7 Installation Instructions Internal fan canopies For canopies that have internal fans please ensure the fan is in the correct position before attempting to mount the canopy to a wall. The centrifugal fan used within the internal fan packs draws air from both sides, so to work most effectively it has to be located centrally to give an even draw across the length of the canopy.
- Page 8 External fan canopies Parry offer all of their canopies with the option of an external fan packs. Especially useful for difficult applications, long runs and runs with a change in direction. The external fan pack consists of a duct mount fan sized to the length of canopy, a pair of flanges, and a speed controller.
- Page 9 Installation Instructions not supplied as standard but can be bought separately from Parry. Parry can also supply reducers if you want to change the diameter of ducting leading away from the fan. Hanging the canopy on a wall The method chosen to hang the canopy to a wall or ceiling will depend greatly on the type and material of the wall or ceiling.
-
Page 10: Cleaning Instructions
Cleaning Instructions Cleaning Instructions The appliance should be cleaned after every use and drip trays emptied as and when they fill Allow canopy and any equipment sited below, to cool down before draining or cleaning the canopy Turn off the mains power. Remove baffle filters and clean in hot soapy water. -
Page 11: Fault Finding
This appliance should be routinely serviced to prolong its lifetime. Parry recommends that the appliance is serviced every 12 months by a Parry authorised engineer. Failure to service your product within the initial 12 month warranty period will cause the 24 month warranty to become void. -
Page 12: Wiring Diagram
Wiring Diagram Wiring diagram Speed Controller Instructions For models CONTRE3-A and CONTRE6-A Technical Data Code Current Range Fuse CONTRE3-A (STL-0-30-AT) 0.1-3.0A 5.0A CONTRE6-A (STL-0-60-AT) 0.5-6.0A 10.0A Enclosure: Plastic R-ABS, UL94-VO, grey RAL 7035, IP54 Max ambient temperature: 35degrees centigrade For indoor use only, non-condensing The electronic speed controller of these series control the speed of single phase (230 VAC –... - Page 13 Wiring Diagram CONTRE3-A (STL-0-30-AT) CONTRE6-A (STL-0-60-AT) Single phase wiring diagram for both comodels IN195-3...
-
Page 14: Fixing Diagram
Fixing Diagram Fixing Diagram Code CONTRE3-A (STL-0-30-AT) 162mm 96mm 75mm 71mm 108.8mm CONTRE6-A (STL-0-60-AT) 205mm 124mm 97mm 102mm 140mm IN195-3... -
Page 15: Parts List
Parts List Parts List Part Number Description Code Internal Fan Pack (IF) for use with all sizes of canopy Snail fan supplied with square FANBD9-9 mounting plate 6amp speed controller CONTRE6-A Set of two 400mm round flanges FLANGE8897 External Fan Pack (EF) for use with canopies 1000/1200/1500/1800mm 400mm round duct mount fan... -
Page 16: Warranty Information
Please be aware that the warranty perishable items, water damage or loss due to injury or fire starts from the date of purchase from Parry and not the sale damage. or installation date of the equipment. -
Page 17: Disposal And Recycling
Parry Catering recognises our obligations to the EU DIRECTIVE covering the waste disposal of electrical and electronic equipment (WEEE) Parry Catering are committed to this policy in order to help conserve the environment. At the end of this units life you MUST dispose of it in an approved manner. You MUST not discard the unit or place it in the refuse bin.
Need help?
Do you have a question about the Snack Series and is the answer not in the manual?
Questions and answers