Related Manuals for Funkwerk TM250
Summarization of Contents
Introduction to the TM250 Traffic Monitor
Symbols and Warnings
Explains warning and information symbols used in the manual.
Customer Service Information
Provides contact details for returns and suggestions.
TM250 Device Overview
Introduces the TM250's function and capabilities, including ADS-B, Mode S, and FLARM.
Operation of the TM250 Traffic Monitor
Operation Controls and Buttons
Details the function of the ON/OFF, PLUS, MINUS, and MODE buttons.
Powering On and Off
Describes the procedure for turning the device on and off.
Traffic Display Functionality
Explains the traffic view (TFC), its layout, and symbols.
System Configuration Settings
Details settings for Audio, FLARM, Mode S, Mode C, Display, Filter, Tfc Tx, and Demo.
Audio Alerts Configuration
Configures audio alert settings for different traffic types.
FLARM® Signal Settings
Controls FLARM® warnings and external device detection.
Mode S and Mode C Sensitivity
Adjusts sensitivity for Mode S and Mode C signal detection.
Display Mode Settings
Configures display brightness and color inversion (Day/Night mode).
Altitude Filtering for ADS-B
Filters ADS-B targets based on altitude relative to own aircraft.
Traffic Data Output Configuration
Sets the output format for traffic data to external devices.
Demonstration Mode Usage
Explains how to use the demo mode to test settings and functions.
ICAO Configuration and Initialization
Describes the process for initializing the ICAO 24-bit address.
Aircraft Status Information Page
Displays current aircraft status like GPS, LAT/LON, ALT, ICAO, and BARO.
Traffic Data Output
Details how to connect external displays and configure traffic data output.
Software Update Procedure
Outlines the steps and requirements for updating the TM250 software.
Installation of the TM250 Traffic Monitor
Unpacking and Inspection
Instructions for unpacking the device and handling transport damage.
Scope of Delivery Contents
Lists all items included in the TM250 package.
Device Mounting Guidelines
Provides recommendations for mounting the TM250 and antennas.
TM250 Connectors and Interfaces
Details the GPS, 1090MHz/FLARM, USB, and Power/RS-232 connectors.
Housing Dimensions and Cut-out
Specifies the physical dimensions of the TM250 and panel cut-out.
Installation Tips and Best Practices
Offers advice on mounting, wiring, and antenna placement.
Post-installation Checks
Outlines checks to ensure proper function and prevent interference.
Available Accessories
Lists additional accessories like antennas and cable harnesses.
Appendices and Technical Data
Technical Specifications
Lists technical data including regulations, temperature, power, and weight.
Wiring Diagrams
Provides wiring diagrams for different transponder types (TRT-Serie, OEM).
TRT-Serie Wiring Diagram
Shows the cable harness connections for the TRT-Serie transponder.
OEM-device Wiring Diagram
Illustrates the cable harness connections for OEM-device transponders.
Threat Classification Zones
Defines threat zones based on distance and altitude for collision avoidance.
Need help?
Do you have a question about the TM250 and is the answer not in the manual?
Questions and answers