Table of Contents
Advertisement
OPERATION AND CARE OF
q PB-101
q PB-101B
6900-189-000 July 2012
INSTRUCTIONS FOR
INSTITUTIONAL
PARAFFIN BATH
(MODELS PB-101, PB-107, PB-104 & PB-105)
q PB-107
q PB-107B
P.O. Box 3527 • City of Industry, CA, 91744-0527, U.S.A.
800-782-7706 • 626-968-6681 • www.whitehallmfg.com
q PB-104
q PB-104B
Member of
q PB-105
q PB-105B
Advertisement
Table of Contents
Related Manuals for Dickson PB-104
Summarization of Contents
Why Dickson Paraffin Baths?
Stainless Steel Tank
Explains the construction material and its benefits.
Precise Temperature Control
Details the temperature accuracy and its importance.
High Heat Warning Light
Describes the indicator for high temperatures.
Timed Melting or Sanitizing Circuit
Explains the timer function for specific models.
Integrated Heating Elements
Details the heating element design and safety features.
Directions for Operating
Temperature Verification Warning
Crucial warning to always check the thermometer for operating temperature.
Maintenance Circuit Operation
Explains how the maintenance circuit maintains the treatment temperature.
Adjusting Temperature Higher
How to increase temperature using the high-heat knob.
Adjusting Temperature Lower
How to decrease temperature by unplugging the unit.
High Heat Indicator Light
Explains the function and limitation of the high heat indicator light.
Sanitizing the Bath
Instructions for sanitizing the paraffin bath.
Temperature Limits and Safety
Explains temperature limits and safety features like limit switches.
Critical Operation Warning: Empty Tank
Warning against operating the unit without paraffin in the tank.
Directions for Adjusting the Maintenance or Treatment Circuit Thermostat
Thermostat Adjustment Location
Details where thermostat adjustment is located on different models.
Adjusting Thermostat Lower
Instructions on how to lower operating temperature via adjustment screw.
Adjusting Thermostat Higher
Instructions on how to raise operating temperature via adjustment screw.
Thermostat Malfunction Note
Advise to call for instructions if thermostat malfunctions.
Directions for Treatment
Pre-Treatment Preparation
Steps for washing and drying the appendage before treatment.
Treatment Immersion Duration
Recommended immersion times for paraffin glove.
Recommended Immersion Times
Lists recommended immersion times for different body parts.
Precautions for Specific Patients
Advises caution for old, weak, or debilitated individuals.
Modified Treatment for Sensitive Patients
Suggests alternative treatment method for sensitive patients.
Alternative Treatment Method
Describes using saran wrap for prolonged heat benefit.
Higher Temperature for Some Patients
Suggests higher bath temperatures for younger, healthy patients.
Paraffin Glove Disposal and Refills
Discusses discarding used paraffin gloves and using refill kits.
Cleaning the Bath
Daily Sanitizing Procedure
How to perform daily sanitization using the melting circuit.
Deep Cleaning Procedure
Steps for deep cleaning requiring full paraffin removal.
Using the Drain Ring
Instructions on using the drain ring for paraffin removal.
Post-Drainage Cleaning Steps
Actions after draining, including flushing and cleaning slats.
Paraffin Re-introduction
How to return clean paraffin to the bath.
Changing the Fuse
Fuse Replacement Procedure
Step-by-step guide to replacing a blown fuse.
Paraffin Refills
Refill Paraffin Specifications
Details on purchasing and specifying refill paraffin wax.
Dickson Paraffin Bath FAQ
Breaker Tripping Issues
Explains why circuit breakers might trip when the unit is plugged in.
Fuse Blowing Issues
Discusses causes for fuses blowing, indicating a dead ground.
Indicator Light Not Turning On
Troubleshooting steps for a non-functional indicator light.
Overheating/Failure to Cool
Troubleshooting for baths that overheat or fail to cool down.
Failure to Reach Sanitize Temperature
Diagnoses issues preventing the bath from reaching sanitize temperature.
Temperature Fluctuations and Cooling Issues
Troubleshooting for baths that overheat then cool down.
Stuck Timer Troubleshooting
Steps to address a timer that is stuck.
Incomplete Wax Melting
Addresses issues where the wax does not melt completely.
Old Wax Performance Issues
Explains problems with old wax and potential solutions.
Wax Too Hot at Lowest Setting
Troubleshooting when wax is too hot even at the lowest setting.
Model Reference Notes
Information on older model references.
Sanitize Mode Activation
How the sanitize mode is activated on specific models.
PB-101 Sanitize Mode Switch
Describes the PB-101's sanitize mode activation method.
Standard Operating Temperature Range
Specifies the standard operating temperature range.
Capillary Thermostat Explanation
Explains the function of the capillary thermostat.
Overheating Sensor Details
Information on overheating sensors and their function.
Timer Functionality for Sanitize
Clarifies the timer's role in the sanitize sequence.
Need help?
Do you have a question about the PB-104 and is the answer not in the manual?
Questions and answers