Trumpf TruBend 7000 Series Retrofitting Manual

Angle measuring system ocb (option)

Retrofitting guide

TruBend Serie 3000, 5000 und 7000

Angle measuring system OCB (option)

2012-11-05

Material number: 1714400

Table of Contents

Need help?

Do you have a question about the TruBend 7000 Series and is the answer not in the manual?

Details the OCB angle measuring system, its components like the DP-601 goniometer, and compatible machine controls.

Explains the OCB radio transfer device, its function, and LED indicators for status and positioning.

Details the meaning of LED lights on the OCB radio measured value transfer device for battery and transfer status.

Describes the function of the OCB USB stick for receiving angle values and enabling communication via USB.

Guides on how to pair OCB transfer devices with OCB USB sticks when new arrangements are needed.

Information on using OCB with DELEM controls, noting limitations like DA65TW incompatibility.

Instructions on how to activate the OCB angle measurement system option using a voucher and the 'appopt.exe' application.

Step-by-step process for installing software options via file mode, using voucher identifiers and license files.

Details on OCB activation for TASC6000 controls, noting automatic activation upon USB stick insertion.

Explains the OCB correction input mask for applying measured angles as corrections to bends.

Describes how to input total angle corrections directly into the production mask, with automatic LED control.

Explains how to apply global corrections to nominal angles for all relevant bends in a program.

Lists the CE and FCC standards and regulations that the OCB system complies with.