Download
Share
Print this page
  1. Manuals
  2. Brands
  3. HAUL MASTER Manuals
  4. Motorcycle Accessories
  5. 99900
  6. Set up and operating instructions manual

HAUL MASTER 99900 Set Up And Operating Instructions Manual

Motorcycle lift ramp
Hide thumbs

Advertisement

Quick Links

Download this manual
MOTORCYCLE LIFT RAMP
SET uP And OPERATIng InSTRuCTIOnS
distributed exclusively by Harbor Freight Tools
Read this material before using this product.
Failure to do so can result in serious injury.
SAvE THIS MAnuAL.
Copyright
2008 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Motorcycle Lift Ramp partially hidden in truck bed.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
. All rights reserved. No portion of this manual or any artwork
®
99900
.
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the 99900 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HAUL MASTER 99900

Summary of Contents for HAUL MASTER 99900

  • Page 1 MOTORCYCLE LIFT RAMP 99900 SET uP And OPERATIng InSTRuCTIOnS Motorcycle Lift Ramp partially hidden in truck bed. distributed exclusively by Harbor Freight Tools ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product.

  • Page 2: General Safety Warnings

    Always wear AnSI-approved hazardous situation which, if safety goggles and heavy duty not avoided, could result in work gloves. Safety equipment minor or moderate injury. SKU 99900 For technical questions, please call 1-800-444-3353. Page 2...
  • Page 3 1000 pounds. Maintain the Motorcycle Lift Ramp. Check for misalignment or binding SKU 99900 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4 Do not use the Motorcycle Lift with It must be understood by the operator the truck or motorcycle engines’ run- that common sense and caution are ning. factors which cannot be built into this SKU 99900 For technical questions, please call 1-800-444-3353. Page 4...

  • Page 5: Specifications

    InjuRY FROM ACCIdEnTAL of the truck bed or tailgate. OPERATIOn: Release any load from the Motorcycle Lift before assembling or making any adjustments to the unit. Also SKU 99900 For technical questions, please call 1-800-444-3353. Page 5...
  • Page 6 Use the one mounting hole in either the Middle Mounting Channel or Rear Mounting Channel as a template to mark and drill one 17/32” diameter hole in the truck bed. (See Figures C and d.) SKU 99900 For technical questions, please call 1-800-444-3353. Page 6...
  • Page 7 Guide Pipe Support (15). Slide the Rod down through the Sup- port, then through the Hinged Guide, then into the Guide Block (15) under the Wheel Pan. (See Figure g.) SKU 99900 For technical questions, please call 1-800-444-3353. Page 7...
  • Page 8 Steel Cable over Cut the long wires from the Winch the Nylon Guide Wheel (9) near the Solenoid Box (26A) to length and at- Winch, and under the Slide Wheel SKU 99900 For technical questions, please call 1-800-444-3353. Page 8...

  • Page 9: Operating Instructions

    Remove the Small Lock Pin (51) to allow the Wheel Bracket Assembly (39) to travel down the Large Slide LARgE LOCK PIn Base (21). (50) (See Figure j, next page.) FIguRE H SKU 99900 For technical questions, please call 1-800-444-3353. Page 9...
  • Page 10 Large Slide Base to install the Small Push the motorcycle up to the Wheel Lock Pin. (See Figure L.) Bracket Assembly (39) and push the front wheel into the Wheel SKU 99900 For technical questions, please call 1-800-444-3353. Page 10...
  • Page 11 Winch Drum. the right (away from you) when pulled (See Figure O, next page.) into the Wheel Bracket Assembly (39). SKU 99900 For technical questions, please call 1-800-444-3353 Page 11...
  • Page 12 Slide Base hits the stop at the end of the Base Frame (1). Release the tension on the Steel Cable (15A) so it is snug. SKU 99900 For technical questions, please call 1-800-444-3353 Page 12...
  • Page 13 Base Frame (1). Straps used to secure the motorcycle (See Figure u, next page.) to the Large Slide Base (21). Remove the Large Lock Pin (50). (See Figure T.) SKU 99900 For technical questions, please call 1-800-444-3353 Page 13...
  • Page 14 LOCK Once the motorcycle is fully on the (40) ground, with its front wheel suspend- ed in the Wheel Bracket Assembly (39), install the Small Lock Pin (51) SKU 99900 For technical questions, please call 1-800-444-3353 Page 14...
  • Page 15 TO PREvEnT dren and other unauthorized persons. SERIOuS InjuRY FROM ACCIdEnTAL OPERATIOn: Remove any load from the Motorcycle Lift before performing any inspection, maintenance, or cleaning procedures. SKU 99900 For technical questions, please call 1-800-444-3353 Page 15...

  • Page 16: Troubleshooting

    Gear Housing (Motor Side) Nylon Ring Copper Bushing Planet Gear (Stage 2) Motor Square Nut Long Bolt Drum Support Solenoid Box Assy. Drum Bushing Battery Cable Tie Rod Remote Control Drum SKU 99900 For technical questions, please call 1-800-444-3353 Page 16...
  • Page 17 ASSEMBLY dIAgRAM - WInCH COMPOnEnTS 15A 16A SKU 99900 For technical questions, please call 1-800-444-3353 Page 17...
  • Page 18 Lock Nut (M10) Flat Washer (M12) Flat Head Screw Nut (M10) Bearing Bolt (M10 x 35) Rear Slide Wheel Hex Sleeve Bolt (M10 x 110) Rivet Nut Cable Guide Wheel SKU 99900 For technical questions, please call 1-800-444-3353 Page 18...
  • Page 19 ASSEMBLY dIAgRAM - LIFT RAMP COMPOnEnTS SKU 99900 For technical questions, please call 1-800-444-3353 Page 19...
  • Page 20 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 99900 For technical questions, please call 1-800-444-3353 Page 20...