Model
instructions and precautions
distributed exclusively by Harbor Freight tools
Visit our website at: http://www.harborfreight.com
saVe tHese instructions. read all
precautions and instructions.
©
Copyright
2008 by Harbor Freight Tools
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
speciFications
Maximum Weight
Bike Capacity
Holding Mechanism
Class Uses
Swing-down feature
unpacking
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.
iMportant saFetY
inForMation
assembly precautions
1.
Assemble only according to these instruc-
tions. Improper assembly can create haz-
ards.
98019
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this document or any artwork contained
100 lbs
2
Thermoplastic Bike Holders,
Velcro Straps
Class I, II, III, IV Hitches
For opening hatches
2-Bike HitcH
rack
2.
Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3.
Keep assembly area clean and well lit.
4.
Keep bystanders out of the area during as-
sembly.
5.
Do not assemble when tired or when under
the influence of drugs or medication.
6.
Contact the Department of Transportation
and local regulations for laws regarding the
use of this bike rack.
use precautions
1.
This product is not a toy. Do not allow chil-
dren to play with or on this item.
2.
Use for intended purpose(s) only.
3.
Inspect before use; do not use if parts loose
or damaged.
4.
Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
®
.