Related Manuals for Sufag Power
Summarization of Contents
Safety for Handling Snowmakers
Electrical System Safety
General safety rules for electrical systems, including checks, disconnections, and expert intervention.
Hydraulic System Safety
Rules for hydraulic systems, focusing on hoses, couplings, pressure, and handling.
Safety for Handling Snowmakers
Additional Safety Instructions
Specific safety measures for operation, placement, and handling of the snowmaker.
Protection of Other Persons
Measures to protect guests and ensure safety around the snowmaker during operation.
Description of the Snowmaker
Construction and Mode of Operation
Explains how the snowmaker works, mixing water and air to create snow crystals.
Description of the Snowmaker
Technical Data and Performance Characteristics
Presents technical specifications and performance data for different snowmaker models.
Description of the Snowmaker
Dimensions and Weights
Provides a table detailing the dimensions and weights for different snowmaker configurations.
Operation
Placement of Snowmaker
Instructions on how to position and secure the snowmaker in the terrain.
Water Connection
Details on connecting the snowmaker to the water supply using a 2" hose.
Power Connection
Important safety and technical information regarding electrical power connection.
Operation
Startup of the Snowmaker
Step-by-step guide for starting up the snowmaker, including pre-heating and checks.
Operation
Changing the Water Flow Rate
Explains how to adjust the water flow rate based on climatic conditions and nozzle ring combinations.
Operation
Switching Off the Snowmaker
Procedure for safely shutting down the snowmaker after use.
Continuous Operation
Advice on maintaining continuous operation, including oil checks and swivel mechanism.
Operation
Alarm Device
Describes the function of the alarm device and fault indicators.
Automatic Swivel Mechanism
Details the operation and control of the automatic swivel mechanism.
Automatic System
Mentions the availability of an automatic control system (STF).
Soft Starter Function - Fan Motor
Explains the soft starter function for the fan motor and motor protection settings.
Maintenance
Summer Service
Recommendation for annual revision and check list before storing the machine.
Compressor
Guidelines for compressor oil changes and oil quality.
Nozzle Ring
Information on cleaning clogged atomizing nozzles in the nozzle ring.
Water Filter
Advice on water filter cleaning intervals and methods to avoid soiling.
Maintenance
Pressure Regulation Nucleator
Instructions for adjusting and maintaining the pressure regulator for nucleation water.
Maintenance
Electric Part
Annual maintenance tasks for electrical components, connections, and safety checks.
Defects - Causes - Solutions
Tripped Motor Protection for Fan
Reasons and solutions for fan motor protection tripping.
Tripped Motor Protection for Compressor
Reasons and solutions for compressor motor protection tripping.
Tripped Breaker for Heating
Identifies causes and troubleshooting steps for heating circuit breaker trips.
Defects - Causes - Solutions
Tripped Breaker for Transformer
Solutions for transformer circuit breaker trips, including load checks.
Tripped Breaker for Socket
Troubleshooting for socket circuit breaker trips, focusing on device load and connection.
Check List for Service
Check List for Control and Service
Outlines daily, every 200 hours, yearly, and every 2 years service tasks.
Warranty
Terms of Warranty
Details the warranty period, reporting procedures, and exclusions.
Need help?
Do you have a question about the Power and is the answer not in the manual?
Questions and answers