Related Manuals for OriginGPS Hornet Series
Summarization of Contents
SETUP
Open CD and Select Series
Open CD and select the ORG14XX Series from the main menu to begin the setup process.
Install FTDI USB-UART Driver
Install the FTDI USB-UART driver by clicking the dedicated button for proper device communication.
Install SiRFLive Software
Install the SiRFLive software by following the on-screen instructions after pressing the setup button.
Connect FTDI USB to UART Cable
Connect the FTDI USB to UART cable between the Demo Board and the PC to establish hardware linkage.
SiRFLive ESSENTIALS
Open SiRFLive Application
Launch the SiRFLive software by clicking its desktop icon to access GPS module functionalities.
Configure Receiver Settings
Access and adjust receiver settings by clicking the 'Receiver Settings' button on the main SiRFLive toolbar.
Establish Connection
Initiate the connection to the GPS module by pressing the 'Connect' button on the main SiRFLive toolbar.
EVALUATION KIT ESSENTIALS
Patch Antenna Placement
Position the GPS antenna's upper surface towards the sky for optimal GPS satellite reception.
Tactile Switch Functionality
Use the tactile switch to wake the GPS module from Hibernate mode, typically for Push-To-Fix (PTF).
Need help?
Do you have a question about the Hornet Series and is the answer not in the manual?
Questions and answers