Download Print this page

HAUL MASTER 66260 Instructions And Precautions

Hitch mount vise plate

Advertisement

Quick Links

InstructIons and precautIons
saVe tHese InstructIons. read all
precautIons and InstructIons.
©
Copyright
2008 by Harbor Freight Tools
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and servise may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
specIFIcatIons
Square Steel Tube - 22"L x 2"
Material
Vise Mount Plate - 7-7/8"L x 7-7/8W x 3/16"T
Vise Mounting
1-7/8"L x 5/8"W (4)
Holes
unpackIng
When unpacking, make sure that the item
is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at the
number shown on the cover of this document as
soon as possible.
66260
distributed exclusively by Harbor Freight tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
®
. All rights reserved. No portion of this document or any artwork contained
HItcH mount
VIse plate
®
.
Important saFetY
InFormatIon
assembly precautions
1.
Assemble only according to these instruc-
tions. Improper assembly can create haz-
ards.
2.
Fits any standard 2" hitch receiver.
3.
Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly and
set-up.
4.
Keep assembly area clean and well lit.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 66260 and is the answer not in the manual?

Questions and answers

Summary of Contents for HAUL MASTER 66260

  • Page 1 HItcH mount VIse plate 66260 InstructIons and precautIons ® distributed exclusively by Harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com saVe tHese InstructIons. read all precautIons and InstructIons. © ® Copyright 2008 by Harbor Freight Tools .
  • Page 2 Pull out the Hairpin Clip (2) and slide out the Align up the holes in the vise with those in Receiver Retaining Pin (5). the Vise Mounting Plate. (See Fig. 3.) SKU 66260 For technical questions, please call 1-800-444-3353. Page 2...
  • Page 3 Clean off any chips, oil, grease, dirt, or other debris. repair Before use, a quick check is recommended to see if there are cracks or bent parts. SKU 66260 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 66260 For technical questions, please call 1-800-444-3353. Page 4...