Related Manuals for Aqua Clear 50
Summarization of Contents
Important Safeguards
General Safety Instructions
Read and follow all safety instructions and notices for complete enjoyment and understanding of the product.
Electrical Shock Precautions
Take special care regarding electrical shock, especially when water is involved, and follow specific handling and repair guidelines.
Child and Physical Hazard Safety
Ensure close supervision when used by children and avoid contact with moving or hot parts to prevent injury.
Handling, Usage, and Restrictions
Always unplug before handling, avoid unintended uses, and adhere to temperature and liquid restrictions.
Contact and Warranty Information
How to Contact Us
Find contact information and support channels for product operation questions and troubleshooting assistance.
Product Warranty Details
Understand the unconditional guarantee for defects in material and workmanship for two years from the purchase date.
How it Works
Filtration System Overview
The AquaClear Power Filter draws water through an extension tube into the motor for purification via a multi-stage filtration system.
Multi-Stage Filtration
Details the three stages: Mechanical-Foam, Chemical-Activated Carbon, and Biological-BioMax, for optimal aquarium health.
Patented Refiltration System
Allows control of flow rate without compromising efficiency, processing water multiple times for clearer results.
Power Filter Maintenance
Routine Cleaning Procedure
Unplug the filter, remove and rinse parts in lukewarm water, clean intake tubes, and reassemble the unit.
Motor Cleaning
Every three months, thoroughly clean the motor by removing it, cleaning the impeller, and lubricating the seal ring.
Replacement Parts
Parts Identification and Ordering
Lists all replacement parts for AquaClear Power Filters by model number and provides corresponding article numbers.
Quick Start Guide
Packing List Verification
Inspect the package contents against the provided list to ensure all filter parts and inserts are included.
Preparing Filter Inserts
Instructions for rinsing and preparing Foam, Activated Carbon, and BioMax filter inserts before installation.
Installing Filter Inserts
Guide on placing prepared filter inserts into the filter basket and then seating the basket into the filter case.
Attaching Intake and Leveling Device
Steps for attaching the intake 'U' tube and extension tubes, and inserting the leveling device for proper filter placement.
Power Filter Start-Up
Instructions for filling the filter case, priming, plugging in, and adjusting the water flow control for initial operation.
Troubleshooting and FAQs
Motor Not Starting or Noise
Check impeller blades for free movement on the magnet assembly if the motor doesn't start or makes noise.
Filter Not Re-starting
Ensure the unit is plugged in, parts are clean and correctly replaced after maintenance for proper restart.
Priming Process Issues
Verify correct part installation, water level, power connection, and 'U' tube lever position for priming.
Cloudy Water
Bacterial cloudiness may occur in new aquariums; consult a professional if it persists beyond six weeks.
Filter Insert Maintenance
Clogged inserts reduce efficiency; immediate rinsing or replacement is required if the filter basket dislodges.
Reduced Flow Operation
Operate at reduced flow during feeding or for small/delicate fish to improve food consumption and reduce waste.
Rinsing Inserts with Aquarium Water
Use only aquarium water to rinse inserts, as chlorine/chemicals in tap water are toxic to fish.
Need help?
Do you have a question about the 50 and is the answer not in the manual?
Questions and answers