Related Manuals for Aqua Clear 70
Summarization of Contents
Important Safety Precautions
General Use and Electrical Safety
Follow all instructions and be aware of electrical hazards, proper cord use, and supervision.
Intended Use and Limitations
Use the pump only for intended purposes; avoid swimming pools, high temperatures, and flammable liquids.
Additional Safety Guidelines
Environmental and Operational Safety
Ensure indoor use, secure installation, proper extension cords, and prevent the pump from running dry.
Contact and Support Information
Customer Service Contact Details
Provides toll-free numbers and helpline for Canada and the UK for product inquiries and support.
Product Warranty Information
Warranty Coverage and Limitations
Details the two-year warranty, its conditions, and exclusions for defects in material and workmanship.
How the AquaClear Filter Works
Filter Operation Overview
Explains how the filter draws water, pumps it, and uses the intake tube to direct flow through filter inserts.
CycleGuard Multi-Stage Filtration
Provides optimal Mechanical, Chemical, and Biological filtration, maintaining beneficial bacteria levels.
Stage 1: Mechanical-Foam Insert
Performs mechanical filtration by trapping particles and debris with its optimized pore size.
Stage 2: Chemical-Activated Carbon Insert
Uses premium carbon to adsorb impurities, remove odors, and provide clear aquarium water.
Stage 3: Biological-BioMax Insert
Provides a complex pore system for beneficial bacteria to thrive, removing ammonia and nitrites.
Patented Refiltration System
Allows control of flow rate for gentler water flow, processing water multiple times for clearer results.
Power Filter Maintenance
Routine Cleaning Procedure
Unplug, disassemble, rinse collected debris, tubes, and impeller assembly in lukewarm water.
Motor Unit Cleaning
Every three months, clean the motor unit by removing and gently cleaning it after unplugging.
Impeller and Seal Ring Care
Pull and rinse the impeller to remove deposits; wet the motor seal ring before reassembly.
Replacement Parts
Parts List and Model Numbers
Lists replacement parts with corresponding article numbers for different AquaClear® Power Filter models.
Quick Start Guide
Packing List
Details the parts included in the AquaClear® Power Filter package for initial inspection.
Preparing Filter Inserts
Instructions on rinsing and preparing foam, activated carbon, and BioMax inserts before installation.
Installing Filter Inserts
Guidance on placing the prepared filter basket into the filter case, ensuring a snug fit.
Attaching Intake "U" Tube
Steps for installing the intake "U" tube, extension tube, and ensuring a secure connection.
Attaching Leveling Device
Instructions for inserting and adjusting the leveling device to ensure the filter is mounted correctly.
Power Filter Start-Up
Procedure for filling, priming, plugging in, and adjusting the water flow control for initial operation.
Troubleshooting and FAQs
Motor Not Starting or Noisy
Check impeller blades for free movement on the magnet assembly.
Motor Not Re-starting
Ensure the unit is plugged in and all parts are clean and correctly replaced.
Priming Process Issues
Verify correct part installation, water fill, power connection, and "U" tube lever position.
Cloudy Aquarium Water
Bacterial cloudiness is normal in new setups; consult a professional if it persists.
Impact of Forgetting Filter Cleaning
Clogged inserts reduce efficiency; immediate rinsing or replacement is required.
When to Operate Reduced Flow
Reduced flow is beneficial during feeding or for delicate fish.
Rinsing Inserts with Aquarium Water
Use aquarium water to avoid chlorine/chemicals toxic to fish found in tap water.
Need help?
Do you have a question about the 70 and is the answer not in the manual?
Questions and answers