Related Manuals for Aqua Clear 110
Summarization of Contents
Important Safeguards
General Safety Instructions
Read and follow all safety instructions and important notices for proper use and understanding.
Electrical Shock Hazards
Take special care with electrical components as water is used; do not attempt repairs.
Child Supervision and Moving Parts
Supervise children and avoid contact with moving or hot parts for safety.
Aquarium Appliance Safety
Always disconnect appliances from electricity before placing hands in water or performing maintenance.
Pump Usage Guidelines
Use pump for intended purposes only and avoid unrecommended attachments or specific water types.
Additional Safety and Usage Tips
Indoor Use and Installation
Use appliance indoors only and ensure it is securely installed before operation.
Cord Usage and Dry Operation
Use correctly rated extension cords and never operate the pump dry.
How to Contact Us
Customer Support Information
Contact customer service via toll-free phone or website for assistance with product operation or questions.
Warranty Information
Product Guarantee Details
The AquaClear Power Filter is guaranteed for two years against defects in material and workmanship.
How It Works
Filter Function Overview
The filter draws water through an extension tube into the motor, pumping it out after passing through inserts.
CYCLEGUARD® Multi-Stage Filtration
Optimal Mechanical, Chemical, and Biological filtration by changing one component at a time to retain bacteria.
Stage 1: Mechanical-Foam Filter Insert
Performs mechanical filtration by trapping particles and debris with its optimal pore size.
Stage 2: Chemical-Activated Carbon Insert
Uses premium carbon for adsorption of impurities, removing odors and discoloration for clear water.
Stage 3: Biological-BioMax Insert
Contains ceramic rings providing surface area for beneficial bacteria to thrive, removing ammonia and nitrites.
Patented Refiltration System
Allows control of flow rate without compromising filtration efficiency, processing water multiple times.
Aquaclear® Power Filters Flow Rates
Flow Rate Specifications
Details maximum and minimum flow rates in gph and lph, along with wattage and RPM for different models.
Power Filter Maintenance
Routine Cleaning Procedure
Unplug filter, remove parts, rinse debris in lukewarm water, and reassemble.
Motor and Impeller Cleaning
Clean motor and impeller assembly every three months by twisting motor and rinsing impeller.
Replacement Parts
Parts List by Model
Lists part numbers for each component (Filter Case, Basket, Cover, etc.) for various AquaClear models.
Quick Start Guide
Packing List
Confirms included parts like Intake 'U' Tube, Motor, Filter Case, Basket, Foam, Activated Carbon, BioMax, etc.
Preparing Filter Inserts
Rinse and Prepare Inserts
All filter inserts must be rinsed thoroughly prior to installation for optimal performance.
Foam Filter Insert Preparation
Rinse Foam Filter Insert and place in filter basket, filling the bottom completely.
Activated Carbon Insert Preparation
Rinse Activated Carbon Insert to remove dust and place horizontally on top of Foam Insert.
BioMax Insert Preparation
Transfer BioMax contents into mesh bag, trim, rinse, and place on the third level of the basket.
Filter Insert Maintenance Schedule
Replace Foam every two months, Activated Carbon every month, and BioMax every three months.
Installing Filter Inserts
Placing Filter Basket into Case
After preparing inserts, place the filter basket into the filter case, applying gentle pressure if needed.
Attaching Intake "U" Tube
Intake Tube Installation
Install the intake 'U' tube, ensuring it clicks into position, and attach extension tubes as needed.
Attaching Leveling Device
Leveling Device Installation
Insert the leveling device into the bottom of the filter case to ensure the Power Filter is level.
Power Filter Start-Up
Mount Filter and Adjust Leveling
Mount the Power Filter onto the rear of the aquarium and adjust the leveling device as required.
Priming the Filter
Fill filter case with water, plug in, and allow 30-45 seconds for priming to expel air.
Adjusting Water Flow
After priming, adjust the water flow control lever on the 'U' tube to the desired rate.
Critical Operation Notes
Never operate the filter without water. Regular cleaning is recommended for efficiency.
Troubleshooting & FAQs
Motor Issues and Troubleshooting
Troubleshoot motor not starting, noise, or not re-starting after maintenance by checking impeller and connections.
Priming and Water Clarity
Verify parts, water level, power, and 'U' tube lever for priming issues. Consult professionals for persistent cloudiness.
Filter Insert Maintenance
Clean or replace clogged filter inserts promptly to maintain filtration efficiency and prevent case damage.
Reduced Flow and Aquarium Water
Operate at reduced flow during feeding or for delicate fish. Use only aquarium water to rinse inserts.
Need help?
Do you have a question about the 110 and is the answer not in the manual?
Questions and answers