Table of Contents
Advertisement
Quick Links
Operating
instructions
Belt-driven
screw compressors
S 40-2 ... S 341
SF 40-2 ... SF 220 series
Before installation or starting the
compressor for the first time, this
manual should be studied carefully to
obtain a clear knowledge of the unit
and of the duties to be performed while
operating and maintaining the unit.
RETAIN THIS MANUAL WITH UNIT.
This Technical manual contains
IMPORTANT SAFETY DATA and should
be kept with the air compressor at all
times.
separate manuals:
compressor control /
frequency converter
Advertisement
Table of Contents
Related Manuals for Boge SF 60-2
Summarization of Contents
General
1.1 General safety instructions
Safety guidelines for compressor operation, maintenance, repair, and accident prevention.
1.2 Introduction
Purpose of instructions, symbols used, intended/inadmissible use, data plate, and service information.
Product description
2.1 Technical data
Detailed specifications including dimensions, performance, and electrical data for S and SF series compressors.
2.2 Function description
Explains the air end operation, air circuit, and oil circuit of the compressor.
2.3 Compressor control
Covers supply pressure, operating states, operating modes, and short operating times.
2.4 Control devices
Details on operating pressure transmitter and optional proportional controller.
2.5 Safety and monitoring devices
Describes safety temperature limiting device, safety valve, and monitoring functions.
2.6 Water cooling
Information on water cooling system, serial and parallel connections.
2.7 Cooling water
Properties and quality requirements for cooling water.
Installation
3.1 Transport
Guidance on safe transportation of the compressor, including handling and lifting methods.
3.2 Compressor room
Requirements for the installation environment: surface, fire protection, and ambient conditions.
3.3 Installation
Step-by-step procedures for installing the compressor and connecting it to the air network.
3.4 Electrical connection
Instructions for safe electrical connection, including main switch and wiring.
3.5 Commissioning
Steps for initial start-up, checking rotation, leaks, and conducting a trial run.
Faults
4.1 General
General information on identifying and rectifying operating faults.
4.2 General faults
Table listing common faults, their possible causes, and rectification measures.
Maintenance
5.1 Safety instructions
Crucial safety precautions for performing maintenance work on the compressor.
5.2 General
Information on BOGE service, review of regular maintenance work, and maintenance intervals.
5.3 Regular maintenance work
Detailed procedures for routine maintenance: filter changes, oil checks, lubrication, V-belt adjustments.
5.4 Spare parts and optional equipment
List of recommended spare parts, wearing parts, and optional equipment for maintenance.
Appendix
6.1 Flow chart
Diagrams illustrating the air-cooled and water-cooled versions of the compressor.
6.2 List of maintenance and service work
A log to record completed maintenance and service tasks performed on the compressor.
Need help?
Do you have a question about the SF 60-2 and is the answer not in the manual?
Questions and answers