Maintenance And Servicing; Cleaning, Maintenance, And Lubrication - CEN-TECH 40963 Set Up And Operating Instructions Manual

mainTenance and
SerVicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
FrOm ShOck Or Fire:
disconnect from the vehicle
battery before performing any
inspection, maintenance, or
cleaning procedures.
TO preVenT SeriOuS
injurY FrOm TOOL
FaiLure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, maintenance, and
Lubrication
1. BeFOre each uSe,
general condition of the tool. Check
for loose hardware, misalignment
or binding of moving parts, cracked
or broken parts, damaged electrical
wiring, and any other condition that
may affect its safe operation.
aFTer uSe,
2.
of the tool with clean cloth.
SKU 40963 For technical questions, please call 1-800-444-3353.
TO preVenT
SeriOuS injurY
inspect the
wipe external surfaces
To check the Lamp:
Xenon Bulb
1. Remove Rubber Sleeve (3) from
nozzle of the Timing Light.
2. Remove the Bulb Cover (4).
3. The Xenon Bulb may develop a black
spot around the anode; this is normal.
If the bulb turns completely black
however, it should be replaced.
4. Contact a certified technician to
replace the Xenon Bulb.
Bulb cover (4)
rubber
Sleeve (3)
Page 12