Related Manuals for Applied Energy Solutions Series 2
Summarization of Contents
5 INSTALLATION
5.1 PHYSICAL LOCATION
Guidance on selecting an appropriate location for installation, considering environmental factors.
5.2 MOUNTING
Instructions for mounting the charger cabinet securely on a suitable surface.
5.3 INPUT POWER CONNECTION
Details on connecting the charger to the AC power supply, including wiring and safety.
6 OPERATING PROCEDURE
6.1 PRELIMINARY SET-UP
Steps to perform before starting the charger operation, including idle mode.
6.2 IMMEDIATE/DELAY START
Configuring the charger for immediate or delayed start of the charging cycle.
6.3 CHARGING THE BATTERY
Procedure for connecting the battery and initiating the charging process.
6.4 TERMINATION OF CHARGE
Explanation of the different methods for terminating a charging cycle.
6.5 REFRESH CHARGE
Description of the automatic refresh charge cycle that occurs after full charge.
6.6 THREE HOUR EQUALIZE CYCLE
Details on the automatic or manual three-hour equalize charge cycle.
8 MAINTENANCE
8.1 MONTHLY PREVENTIVE MAINTENANCE
Routine monthly tasks to ensure the charger remains in good working order.
8.2 CHARGER ADJUSTMENTS
Procedures for adjusting charger settings, including voltage configuration.
CHARGING CURRENT START & FINISH RATE ADJUSTMENT
Adjusting the charger's output current for optimal charging performance.
Need help?
Do you have a question about the Series 2 and is the answer not in the manual?
Questions and answers