Advertisement
TO EXPEL AIR POCKETS IN THE BARREL
If the grease gun does not work properly, there may be air pockets in the barrel.
1.
Unscrew the gun head 1-1
2.
Depress the Release Latch, and slowly push the Plunger Rod forward toward the
Barrel.
3.
After all excess air is expelled from the Barrel, retighten the gun head.
1.
NOTE: ALWAYS clean the grease fitting carefully and completely with a clean
cloth prior to inserting the Grease Gun's Coupler onto the grease fitting.
Insert the Coupler of the Grease Gun fully onto the clean grease fitting of the object
2.
you are lubricating.
3.
With one hand, hold the Barrel securely. With the other hand, pump the Handle of
the Grease Gun several times or until a small amount of grease begins to flow back
out of the grease fitting.
4.
Remove the Coupler from the grease fitting, and wipe any excess grease from the
exterior of the grease fitting and Coupler.
5.
When finished, store the Grease Gun in a clean, dry, safe location out of reach of
children.
INSPECTION, MAINTENANCE, AND CLEANING
1.
Before each use, inspect the general condition of the Grease Gun. Check for
misalignment or binding of moving parts, cracked or broken parts, leaking
connections, and any other condition that may affect its safe operation. If a problem
occurs, have the problem corrected before further use.
Do not use damaged equipment.
2.
Daily, with a soft, dry cloth, remove all dirt, grease, and debris from the exterior of
the Grease Gun. Do not use solvents to clean the Grease Gun. Do not immerse the
Grease Gun in any liquids.
3.
When storing, always keep the Grease Gun in a clean, dry, safe location out of
reach of children.
SKU 1703
For technical questions, please call 1-800-444-3353.
1
/
turns.
2
TO OPERATE THE GREASE GUN
Page 6
Advertisement
