Table of Contents
Advertisement
Chapter 6 Connecting to Ethernet
6.1
Setting the Transmission Speed of the CU-7011
Set the transmission speed of the CU-7011 to the same value as that of the BHT, by
using the DIP switch provided on the bottom of the CU-7011.
(1)
Unplug the AC adapter from the wall socket.
(2)
Turn the CU-7011 upside down.
(3)
Remove the protection sheet of the DIP switch from the CU-7011.
(4)
Set the selectors of the DIP switch as shown below.
DIP switch
(Protection
sheet already
removed)
• Do not set the DIP switch to any configurations other than either of the two
shown above.
• When the power is turned on, the DIP switch settings will be read in.
(5)
Reinstall the protection sheet.
(6)
Plug the AC adapter into a wall socket.
ON
1
2 3
Bottom View
5
For 115.2k bps
O N
ON
OFF
1 2 3
For 4M bps
O N
ON
OFF
1 2 3
Advertisement
Table of Contents
