Table of Contents
Related Manuals for Mira Advance Low Pressure Flex
Summarization of Contents
INSTALLATION REQUIREMENTS
General
Covers acclimatisation, pipework/cable entry, and general setup.
1. Plumbing
Details water supply requirements and connection methods.
Pipework
Provides guidance on pipe sizing, layout, and head loss calculations.
2. Electrical
Outlines electrical supply, earthing, circuit protection, and connection details.
COMMISSIONING
Set Maximum Temperature and Commissioning Cycle
Guides setting max temp and performing the initial learning cycle for optimal performance.
BEAB Care
Explains the BEAB Care compliant mode and its indicators.
FAULT DIAGNOSIS
1. Installer Troubleshooting Guide
Provides initial steps for diagnosing issues, including safety precautions for cover removal.
2. DIAGNOSTIC PROCEDURE
Details the step-by-step process for diagnosing and resolving faults using indicator lights.
Advance² Error Codes X - 7 / Display, Causes and Rectification
Lists error codes, their display patterns, and potential causes/solutions.
Unattended Operation
Describes the automatic 30-minute shut-off timer for safety.
BEAB CARE IN-SERVICE TESTS
Frequency of Inspections
Outlines the schedule and purpose of regular performance checks for the BEAB Care mark.
Equipment Required
Lists the necessary tools and equipment for conducting in-service tests.
CUSTOMER SERVICE
Guarantee
Details the manufacturer's warranty terms, conditions, and exclusions.
What to do if something goes wrong
Advises users on initial troubleshooting steps before contacting support.
Extended Guarantees
Information on available protection plans for extended coverage.
Need help?
Do you have a question about the Advance Low Pressure Flex and is the answer not in the manual?
Questions and answers