Xtant XSC Manual

Xtant Slim Components
Xtant Slim Components offer the flexibility of being
installed in a number of applications. The very shallow
mounting depth of the woofer allows mounting in
shallow doors. In addition, the variable mount tweeter
and built in attenuation circuit allow the user to cus-
tomize the system to his / her listening taste. Please
refer to the options below when installing the Xtant
Slim Components.
Dispersion Module Option
The Xtant Slim Components offer two tweeter dis-
persion modules for flexibility in mounting position.
The smaller module allows for a wider dispersion of
sound where as the larger option narrows the disper-
sion field thereby giving a more direct sound pattern.
In many applications, we have found with door mount-
ed locations, a wider dispersion pattern works well. In
contrast, a narrower dispersion pattern works well in
direct radiating situations. Both options are provided
to meet your listening needs.
Speaker Protection
Speaker grills are provided for use in protecting the
drivers when the components are mounted some-
where other than the existing factory locations.
Mounting the Driver
The most important factor in achieving good acoustic
response is properly mounting the driver. Be sure that
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. Xtant Technologies
Incorporated (Xtant)warrants its amplifiers and accessories to be free
from defects in materials and workmanship under normal use and ser-
vice for a period of two (2) years from the date of original purchase
when the unit is installed by an Authorized Xtant Select Dealer. Non-
Authorized Dealer installed products carry a ninty (90) day parts and
labor limited warranty. The extent and conditions of Xtant's Limited
Warranty are as follows:
1. Authorized Xtant Select Dealer Installed Products: Xtant will either
repair or replace at no charge, to the original purchaser, any unit which
Xtant's examination discloses to be defective and under warranty, pro-
vided the defect occurs within two (2) years from the date of purchase
when the unit is installed by an Authorized Xtant Select Dealer and the
product is returned immediately to Xtant. This warranty is not trans-
ferable.
2. Non-Authorized Xtant Dealer Installed Products: Xtant will either
repair or replace at no charge, to the original purchaser, any unit which
Xtant's examination discloses to be defective and under warranty, pro-
vided the defect occurs within ninty (90) days from the date of pur-
chase and the product is returned immediately to Xtant. This warranty
is not transferable.
3. The date of purchase and proof of Authorized Dealer Installation of
TWO- YEAR LIMITED U.S.A. WARRANTY
an Xtant amplifier and/or accessory must be established by an original
(or copy of the original) sales receipt which must accompany the article
being returned for warranty work.
4. This warranty shall NOT apply to any Xtant unit found to have the
original factory serial number removed or defaced. All products
received (by Xtant) for in warranty or out of warranty repair, with their
original serial numbers removed or defaced, will NOT be repaired and
will be returned to sender, freight collect.
5. The provisions of this warranty shall not apply to any Xtant unit used
for a purpose for which it is not designed, which has been repaired or
altered in any way, or which has been connected, installed, or adjusted
other than in accordance with the instructions furnished in Xtant's
owner's manual. Nor shall this warranty apply to any part which has
been subject to misuse, neglect, or accident.
6. Xtant does not authorize any other persons to assume any other lia-
bility in connection with its products. THIS WARRANTY IS THE ONLY
EXPRESS WARRANTY MADE BY XTANT APPLICABLE TO ITS PROD-
UCTS. ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE APPLICABLE TO XTANT'S
AMPLIFIERS AND OR ACCESSORIES IS LIMITED IN DURATION TO
THE DURATION OF THIS LIMITED WARRANTY. XTANT SHALL NOT
BE LIABLE FOR THE INCIDENTAL, CONSEQUENTIAL, OR COMMER-
CIAL DAMAGES RESULTING FROM THE BREACH OF THIS WRITTEN
the speaker is mounted to a
solid baffle in order to isolate
the front sound wave from the
back sound wave. This can be
achieved by creating a solid,
airtight seal between the speak-
er and its mount. Please review
the tweeter mounting options at the
end of this section.
Wiring the Driver and Crossover
It is important to use good quality speaker wire
when installing speakers. Additionally, a tight connec-
tion is very important in speaker installations. A loose
connection can cause a speaker to cut in and out or
become distorted and harsh.
A 12db per octave two-way crossover is included in
the Xtant Slim Components. When using the XSC
crossover with these speakers, run a positive and neg-
ative speaker lead from the amplifier (if no external
amplifier, use speaker outputs from source unit) to the
input section of the crossover. Wire a second set of
leads from each of the tweeter and woofer positions to
their corresponding drivers. The tweeter option allows
the installer to choose a +3db, 0, or –3db setting in
order to customize the driver for all vehicle types.
WARRANTY. Some states or provinces do not allow the exclusion or
limitation of incidental or consequential damages or limitations on how
long an implied warranty lasts; so the above limitations or exclusions
may not apply to you.
7. Your unit will be serviced on an in-warranty basis within the war-
ranty period for the correction of warranted defects. If improper opera-
tion of your Xtant product should occur, contact your Authorized Xtant
Select Dealer for assistance with the return and factory repair of your
Xtant product. If an Authorized Xtant Select Dealer is not available,
please contact Xtant's Customer Relations Department at (602) 431-
8686 from 8:00 am to 5:00 pm (MST) for assistance.
Xtant Technologies • 7676 South 46th Street • Phoenix, AZ 85040
TO RETURN XTANT PRODUCTS OUT OF WARRANTY: Contact
Xtant's Customer Relations Department at (602) 431-8686 from 8:00
am to 5:00 pm (MST) for a Return Authorization Number. Return the
unit, postage prepaid, in the original protective carton. Please include
a description of the problem and, if desired, a request for an estimate
of repair costs. Unless a request for an estimate is included, the unit
will be repaired as necessary. Repaired unit will be returned with an
itemized statement, C.O.D.