Page 1
Te s t e d a n d a p p r o v e d t o A u s t r a l i a n Standards AS2918-2001 and AS/NZS 4013/4012-2014 Prior to installation check with your state and local authorities regarding any specific regulations that may apply.
Page 2
Congratulations on your purchase of a quality Saxon wood heater. This product is designed according to strict environmental, quality and safety standards and should give you years of trouble free home heating. Read these instructions carefully to get the most out of your heater and to ensure safe and satisfactory heater performance.
Page 4
WARNING: THE APPLIANCE AND FLUE- SYSTEM SHALL BE INSTALLED IN ACCORDANCE WITH AS/NZS 2918 AND THE APPROPRIATE REQUIREMENTS OF THE RELEVANT BUILDING CODE OR CODES. * WARNING: APPLIANCES INSTALLED IN ACCORDANCE WITH THIS STANDARD S H A L L C O M P L Y W I T H T H E REQUIREMENTS OF AS/NZS 4013 W H E R E R E Q U I R E D B Y T H E REGULATORY AUTHORITY I.E.
Page 5
Model All dimensions are in millimetres Walnut Rosewood Blackwood Mahogany Mk II 1000...
Page 6
WARNING: This appliance and flue MUST be installed in a full masonry fireplace. If it is to be fitted into a combustible wall, then it must be fitted with a Maxiheat Zero Clearance Box . ’ The appliance must be installed by a qualified wood heater installer according to the latest version of AS2918. non-combustible must Blackwood Insert...
Page 7
Few things affect the performance of your heater as much as the fuel you burn. Take note of the following:...
Page 8
Before using your wood heater, study this entire section carefully. It will assist you in achieving maximum efficiency and enjoyment.
Page 10
Your heater has been designed as a heavy duty appliance capable of withstanding normal operating conditions.
Page 11
Caring for our planet means reducing pollution and managing our resources intelligently. Every resource we use today we are borrowing from our future generations. The key to successfully meeting our future energy requirements lies in our ability to manage existing resources wisely.
Need help?
Do you have a question about the Blackwood Insert and is the answer not in the manual?
Questions and answers