Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Aichi SP14CJ
Summarization of Contents
Safety Rules
Electrocution Hazards
Warnings and precautions regarding electrical shock hazards, including safe approach distances.
Tip-Over Hazards
Guidelines to prevent machine tip-over, including load limits and stable ground requirements.
Fall Hazards
Precautions to prevent personnel from falling from the platform or during operation.
Collision Hazards
Warnings and procedures to prevent collisions with objects or structures during operation and travel.
Crushing Hazards
Hazards related to being crushed by the machine's boom or platform.
Damaged Machine Hazards
Risks associated with operating a damaged or malfunctioning machine and decal importance.
Fire Hazards
Precautions related to flammable materials and fire prevention during operation.
Battery Safety
Guidelines for safe handling and maintenance of the machine's battery system.
Decals and Symbol Definitions
Symbol and Pictorial Definitions
Provides meaning for various safety symbols and operational pictograms used in the manual.
Safety Signs and Locations
Identifies the placement of safety signs and decals on the machine for hazard awareness.
Safety Systems
Hydraulic Safety Valves
Explains holding valves and relief valves for hydraulic system safety.
Control and Interlock Systems
Describes foot switches, enable switches, emergency stops, and interlock systems for safe control.
Monitoring and Warning Systems
Covers tilt alarms, travel speed limits, overload sensing, and wire rope failure detection.
Structural Safety Features
Details features like oscillation axle locking, lanyard anchorage, and guardrails for structural integrity and personnel safety.
Machine Components
Main Part Identification
Lists and illustrates the primary components of the machine, including boom, platform, and chassis.
Upper Control Panel
Describes the switches, levers, and indicators on the platform's upper control panel.
Lower Control Panel
Details the controls, switches, and indicators located on the ground-level control panel.
Pre-Start Checks
Visual Check Procedures
Steps for performing a thorough visual check of the machine for leaks, damage, and fluid levels.
Preparation for Function Tests
Steps to set up the machine in the correct state for functional testing.
Function Checks
Procedures to verify the proper operation of safety systems, controls, and machine functions.
Daily Maintenance Procedures
Storage Method
Guidelines for proper storage, cleaning, and preparation of the machine after use.
Daily Maintenance Checks
Covers hydraulic oil, battery fluid levels, and scheduled maintenance references.
Machine Operation
Engine Start and Stop
Procedures for safely starting, idling, and stopping the machine's engine.
Platform Controls Operation
How to operate the boom, platform rotation, and traveling functions from the upper control panel.
Ground Controls Operation
Instructions for operating the machine using the lower control panel.
Emergency Operation Modes
Details on using emergency stop, emergency pump, and system failure indicators.
Platform Level Adjustment
How to adjust the platform's levelness for safe and efficient operation.
Towing Procedures
Instructions for releasing brakes and safely towing the machine when it's inoperable.
Emergency Operation
Emergency Stop Function
How to use the emergency stop button to immediately halt all machine movements.
Emergency Lowering Procedure
Using the emergency pump to safely lower the platform in case of power failure.
Transporting the Machine
Loading and Securing Preparations
Precautions for loading the machine onto a carrier, including locking mechanisms and securing points.
Hoisting Methods
Instructions on how to lift the machine using slings and chains, with or without the boom raised.
Machine Specifications
General Specifications
Provides overall dimensions, weight, capacities, and power source details.
Work Range Diagrams
Graphical representation of the machine's working envelope and reach capabilities.
Need help?
Do you have a question about the SP14CJ and is the answer not in the manual?
Questions and answers