Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sierra Wireless ACM
Summarization of Contents
Introduction to AirLink Connection Manager
What is the AirLink Connection Manager (ACM)?
Defines the ACM, its purpose, and deployment within an enterprise network, including its role in mobile connectivity.
FIPS-Compliant ACM
Describes the FIPS-compliant version of ACM and its enhanced security capabilities meeting federal standards.
Supported AirLink Gateways and Routers
Lists AirLink gateways and routers compatible with specific ACM software versions.
Installation
Physical Installation
Details the physical setup and requirements for installing the ACM server appliance.
Connecting the ACM to Your Network
Explains how to establish network connections for the ACM, including IP addressing and port configurations.
Configuration Overview
Logging In and Out
Provides instructions on accessing and exiting the ACM interface, including default credentials.
Configuration Tree
Explains the structure of ACM configuration, consisting of attributes and nodes, viewed via commands.
Manage Configuration Attributes
Covers commands for adding, modifying, deleting, and managing configuration attributes.
Basic Configuration
Admin Password
Details how to change the default administrator password for system security.
OUTSIDE Interface IP Address
Instructions for configuring the public IP address for the ACM's external interface.
INSIDE Interface IP Address
Instructions for configuring the private IP address for the ACM's internal interface.
DNS Server
Explains how to set the DNS server address for the ACM.
ACM VPN Configuration
IPsec VPN
Introduces IPsec VPN, explaining its role in securing communications and key parameters.
IKE Group Configuration
Guides on configuring IKE groups for VPNs, including MOBIKE and IKEv1.
ESP Group
Details how to configure ESP groups for IPsec VPNs, including compression and mode settings.
VPN Peers
Covers provisioning VPN tunnels by configuring peer IDs and attributes.
Certificate Management and Revocation
Explains how to use public key certificates for ACM access control and revocation.
Virtual Router Redundancy Protocol (VRRP)
Describes VRRP for ensuring ACM service availability through redundant configurations.
Troubleshooting
Upgrading to ACM 1.6
Provides steps for upgrading the ACM software to version 1.6.
View VPN Configuration Details
Explains commands to check the status of IKE and IPsec processes and associations.
Dead Peer Detection Issues
Addresses problems with Dead Peer Detection (DPD) and related commands.
NCP Certificate Authentication Failure
Troubleshoots NCP certificate authentication errors, focusing on ID type configuration.
Need help?
Do you have a question about the ACM and is the answer not in the manual?
Questions and answers