Table of Contents
Advertisement
INSPECT THE SHIPPING CONTAINER IMMEDIATELY UPON RECEIVING YOUR UNIT. ANY DAMAGE SHOULD BE NOTED ON
FREIGHT BILL BEFORE SIGNING AND CLAIMS SHOULD BE FILLED WITH CARRIER AS SOON AS POSSIBLE. MAKE SURE THAT
13, 14 & 16 SEER SPLIT SYSTEM AIR CONDITIONERS
Conforms to UL Standard 1995. Certifi ed to
CAN/CSA Standard C22�2 No�236�
9700539
WARNING
!
ELECTRICAL SHOCK, FIRE OR
EXPLOSION HAZARD
FAILURE TO FOLLOW SAFETY WARNINGS
AND INSTRUCTIONS EXACTLY COULD RE-
SULT IN SERIOUS INJURY, DEATH OR PROP-
ERTY DAMAGE.
THIS INFORMATION IS INTENDED FOR USE
BY QUALIFIED HVAC TECHNICIANS
POSSESSING ADEQUATE BACKGROUNDS
OF ELECTRICAL AND MECHANICAL
EXPERIENCE. ANY ATTEMPT TO REPAIR
A CENTRAL AIR CONDITIONING PRODUCT
MAY RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
THE MANUFACTURER OR SELLER CANNOT
BE RESPONSIBLE FOR THE
INTERPRETATION OF THIS INFORMATION,
NOR CAN IT ASSUME ANY LIABILITY IN
CONNECTION WITH ITS USE.
UNIT CONTAINS R-410A REFRIGERANT
AND POE COMPRESSOR OIL! USE ONLY
R-410A REFRIGERANT AND APPROVED POE
COMPRESSOR OIL.
REFRIGERANT LINES MUST BE BRAZED AND
RATED FOR R410 PRESSURES!
PROPER SERVICE EQUIPMENT IS
REQUIRED. USE ONLY R-410A APPROVED
SERVICE EQUIPMENT.
FAILURE TO USE PROPER SERVICE TOOLS
MAY RESULT IN EQUIPMENT DAMAGE OR
PERSONAL INJURY.
RATING PLATE MATCHES THE MODEL NUMBER YOU PURCHASED.
INSTALLER: P LEASE FAMILIARIZE YOURSELF WITH THIS MANUAL BEFORE
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
INSTALLATION AND OPERATING
!
Congratulations on the purchase of your Napoleon Air Conditioner.
Napoleon's line of Split Air Conditioners offer industry leading quality
and are equipped with multiple advanced features:
FEATURES:
• 13, 14 &16 SEER effi ciencies
• Capacities from 1.5 ton to 5.0 tons
• Utilizes environmentally friendly R-410A refrigerant
• High Effi ciency Copeland Scroll Compressors
• Micro Channel Condenser
• Swept Fan Blades
MANUFACTURER RESERVES THE RIGHT TO DISCONTINUE, OR CHANGE AT ANY TIME,
SPECIFICATIONS OR DESIGNS WITHOUT NOTICE AND WITHOUT INCURRING OBLIGATIONS.
Wolf Steel Ltd�, 24 Napoleon Rd�, Barrie, ON, L4M 0G8 Canada /
Phone 866-820-8686 • Fax 705-725-1150 • www.napoleonheatingandcooling.com •
PROCEEDING WITH THE INSTALLATION. LEAVE THIS MANUAL
WITH THE APPLIANCE FOR FUTURE REFERENCE.
INSTRUCTIONS
103 Miller Drive, Crittenden, Kentucky, USA, 41030
hvac@napoleonproducts.com
IOM
Powered By:
W415-1395 / C / 06.26.2017
Advertisement
Table of Contents
Related Manuals for Napoleon 16 SEER
Summarization of Contents
Safety Guidelines for Air Conditioner Installation
Safety Symbols Explained
Explains danger, warning, caution, and important symbols used in the manual for hazard communication.
Critical Safety Rules
Provides critical safety rules and warnings for installation, servicing, and operation of the unit.
Applicable Codes and Regulations
Details electrical connection codes and authorities having jurisdiction for proper installation.
Location and Clearance Requirements
Unit Clearance Specifications
Specifies minimum clearances required for unit installation and accessibility for servicing.
Location Restrictions
Outlines restrictions for placing the unit to avoid noise, water damage, and ensure proper operation.
Installation Procedures
Support Pad Requirements
Details requirements for the support pad, including its size, separation, and leveling.
Unit Placement Instructions
Instructions for removing shipping brackets and correctly positioning the unit onto the prepared pad.
Refrigerant Line Set Installation
Covers limitations and procedures for installing refrigerant lines, including piping, connections, and brazing.
Evacuation of Refrigerant Lines
Evacuate Refrigerant Lines and Indoor Coil
Detailed steps and warnings for evacuating refrigerant lines and the indoor coil using a micron gauge.
Service Valve Operations
Opening Service Valves
Procedures and warnings for safely opening the system's service valves after leak check and evacuation.
Electrical Connections and Requirements
High Voltage Electrical Setup
Details high voltage power supply, disconnect switch, grounding, and wiring diagram for unit installation.
High Voltage Disconnect Switch
Instructions for installing a separate disconnect switch at the outdoor unit.
High Voltage Grounding
Requirements for grounding the outdoor unit according to national, state, and local codes.
Thermostat Installation Guidelines
Guidelines for installing the room thermostat in optimal locations for accurate temperature sensing.
Wiring Diagram and Color Codes
Provides the wiring diagram and color code legend for field wiring connections.
System Charge Adjustment Procedures
Total System Charge
Discusses pre-charged systems and field line set corrections for R410A refrigerant.
Adjusting Charge with TXV Systems
Step-by-step procedure for adjusting system charge with TXV, including subcooling and superheat checks.
Adjusting Charge with Fixed Orifice
Procedure for adjusting system charge using fixed orifice, referencing a charging chart for superheat.
Recording System Information
Instructions for recording system pressures and temperatures after charging for future reference.
Checkout and Operational Procedures
Instructing the Owner
Guidance for instructing the owner on operation, maintenance, and warranty registration.
Pre-Operation Checkout Checklist
A checklist for final unit inspection and verification of all components and connections.
System Operation Verification
Steps to check system operation, voltage, and amperage after initial startup for proper function.
Maintenance Procedures
Indoor Unit Maintenance
Maintenance tasks for the indoor unit, including filter replacement and coil cleaning.
Outdoor Unit Maintenance
Maintenance for the outdoor unit, focusing on condenser coil cleaning and avoiding electrical controls.
Need help?
Do you have a question about the 16 SEER and is the answer not in the manual?
Questions and answers