LED Digital Instructions
Normal Display:
Mode Description:
Time Mode
Hour
Minute
Press and hold for 1 second to wake up the watch
12 Hour and 24 Hour Display:
Time Mode
(12 Hour format)
Hour
Minute
(Hour: 1−12)
Time Mode:
12 Hour/
24 Hour Setting
Hold
2 seconds
Press to toggle
12/24 hour format
Calendar Mode:
Year Setting
(2004−2053)
Hold
2 seconds
• Press and hold " " for one second to "wake up" the watch. The watch will display time mode.
" " will take you to the next mode. Mode sequence is time, calendar and "sleep mode."
• Watch will return to "sleep mode" if no button is pressed for 2 seconds.
• If " " is pressed for over 1 second, the display will light up for 6 seconds. The watch will then
return to sleep mode, even if the button is still pushed in.
• When in setting modes, if " " is pressed and held for 2 seconds, the digits will automatically
advance.
Calendar Mode
Sleep Mode
Month
Press
Press
Date
Time Mode
(24 Hour format)
Hour
Minute
(Hour: 0−24)
Hour Setting
Press
Press to advance
Press to exit
Month Setting
(1−12)
Press
Press to exit
1. Press and hold the " " button for 1 second to
Minute Setting
Press
2. Press " " to adjust the flashing digits.
3. Press " " to set and advance to the next adjustable
Press to advance
4. Repeat steps 2 and 3 to set the hour and minutes.
5. " " will exit set mode.
1. Press and hold the " " button for 1 second to
Date Setting
(1−28,29,30,31)
depends on year
and month
Press
2. Press " " To adjust the flashing digits.
3. Press " " to set and advance to the next adjustable
4. Repeat steps 2 and 3 to set the month and date.
5. " " will exit set mode and update the calendar.
6. If no button is pressed for 30 seconds, the setting
"wake up" the watch. In time mode, press and
hold " " for 2 seconds to enter time setting mode;
12/24 hour time setting will flash.
element (in this case the hour digits).
"wake up" the watch. Press " " again to enter
calendar mode. In calendar mode, press and hold
" " for 2 seconds to enter calendar setting mode;
year digits will start to flash. Year digits will be
between 2004-2053, and then return to 2004.
element (in this case the month).
values will be ignored and the watch will return to
time mode.