Related Manuals for Seiki VS60
Summarization of Contents
Machine Operation Procedures
Daily Machine Maintenance
Essential daily checks for optimal machine performance and safety.
Operation Panel Layout and Functions
Details the layout and functions of the main and NC operation panels.
Step-by-Step Machine Operations
Guide for starting, warming up, and completing daily machine operations.
Manual Machine Control
Explains manual feed, rapid traverse, and tool handling.
Manual Data Input (MDI) Procedures
How to input data directly using the MDI function for various operations.
Program Registration Methods
Steps for registering programs from external devices or via manual input.
Searching Registered Programs
Methods to search for programs by their number or list.
Editing CNC Programs
Covers insertion, alteration, deletion, and background editing of programs.
NC Program Output
How to output NC programs to external equipment via RS-232C.
Automatic Machine Operation
Managing Program Memory
Procedures for operating and verifying programs in memory.
Manual Interventions in Automatic Mode
How to perform manual operations while an automatic cycle is running.
MDI Operations During Automatic Cycles
Integrating MDI commands into automatic program execution.
Automatic Tool Changer (ATC) Operations
ATC Component Identification
Identifies and labels the various parts of the ATC system.
Tool Attachment and Detachment
Procedures for manually attaching and detaching tools from the ATC.
Machine Data Setting
Setting Data Screen Overview
Introduction to the setting data screen and navigation.
Time Measurement and Data Management
Machining Time Measurement
Details the four types of time measurements available on the machine.
Tool Path Animated Drawing
Animated Drawing Parameter Settings
Settings for range, plane, and color in the animated drawing feature.
Work and Tool Setter Operations
Setting Work Origin via Reference Surface
Procedure for setting the work origin using a reference surface with a touch probe.
Setting Work Origin via Reference Hole
Procedure for setting the work origin using a reference hole with a touch probe.
Tool Setter Calibration Procedures
How to set tool offsets and lengths using the tool setter.
Safety Guard Functions
Tool Length Safety Guard
Measures tool length for safety during automatic machining operations.
Workpiece Profile Comparison
Verifies workpiece profile and checks for interference during operation.
Tool Life Management System
Overview of Tool Life Management
Explains how the system counts tool usage and manages tool life.
Managing Spare Tools
Procedures for setting up and utilizing spare tools for continuous machining.
Pre-Machining Tool Verification
Checks tools for defects before starting a machining program.
Tool Life Management M-Codes
Utilizes M-codes to control tool life and cutting monitoring functions.
Operating Tool Life Management
Steps for preparing and executing tool life management functions.
Tool Life Data Screen
Displays and allows modification of tool life data.
Tool Status Overview
Lists the status (USED, OUT OF LIFE, etc.) of all registered tools.
Tool Life Management Parameter Settings
Details parameters and their settings for tool life management functions.
Cutting Load Monitoring System
Cutting Monitoring Process
Explains how monitoring is performed on main and sub-monitoring axes.
Cutting Monitoring Functions
Details overload, no-load, wear, adaptive control, and idle cutting reduction.
Cutting Monitoring Program Control
Uses M-codes and data settings to configure cutting monitoring.
Setting Cutting Monitoring Data
How to select monitoring axes and set data for cutting monitoring.
Enabling Cutting Monitoring
Conditions and procedures required to activate cutting monitoring.
Load Setting Screen
Screen for setting load parameters for cutting monitoring functions.
Tool Life Graph Display
Graphs tool life data showing load changes over its usage period.
Cutting Monitoring Parameter Configuration
How to display and set parameters related to cutting monitoring.
Need help?
Do you have a question about the VS60 and is the answer not in the manual?
Questions and answers