Fossil DIGITAL BJ2693 Manual

Digital BJ2693
B C
A D

Normal Time Display

1. Press A to change mode. Mode sequence is normal time, alarm, chronograph and timer.
2. Press B for EL.
3. Press C to toggle normal time display/time zone 2.
Note: At any point in any setting mode, press D to exit setting mode.

Time and Calendar Setting

1. In normal time display, press and hold D; seconds will begin flashing.
2. Press C to set seconds to zero.
3. Press A to advance to minutes.
4. Press C to advance digit; press and hold C for fast advance.
5. Press A to set and advance to next setting value.
6. Setting sequence is: seconds, minutes, hour, 12/24-hour format, month, date, and weekday.
7. Press D to exit setting mode.

Time Zone 2 Setting

1. In normal time display, press C to toggle to time zone 2.
2. Press and hold D; minutes will begin flashing.
3. Press C to advance digit; press and hold C for fast advance.
4. Press A to set and advance to hour.
5. Press C to advance digit; press and hold C for fast advance.
6. Press D to exit setting mode.

Alarm Mode

1. Press A to change to alarm mode.
2. Press C to toggle alarm/chime on/off.
3. Alarm will sound at preset time for 20 seconds. Press A,C or D to silence alarm.

Alarm Setting

1. In alarm mode, press and hold D; hour will begin flashing.
2. Press C to advance digit; press and hold C for fast advance.
3. Press A to set and advance to minutes.
4. Press C to advance digit; press and hold C for fast advance.
5. Press D to exit setting mode.

Chronograph Mode

1. Press A to change to chronograph mode.
2. Press C to start/stop the chronograph.
3. Press D to reset to zero.

Split Time

1. Press D while the chronograph is running for split time.
2. Press D again to return to chronograph.
3. Press C to finalize timing.
4. Press D to reset to zero.

Countdown Timer

1. Press A to change to timer mode.
2. Press C to start/stop the timer.
3. Press D to reset timer to preset value.

Timer Setting

1. In timer mode, press and hold D; hour will begin flashing.
2. Press C to advance digit; press and hold C for fast advance.
3. Press A to set and advance to minutes.
4. Press C to advance digit; press and hold C for fast advance.
5. Press D to exit setting mode.