Table of Contents
Advertisement
Quick Links
Installation, Operation & Maintenance
Instructions
Please leave this instruction booklet with the owner as it contains
important guarantee, maintenance and safety information
Read this manual carefully before commencing installation.
This manual covers the following products:
Jet 55-45 B
Pt. No. 46619
Jet 80-45 B
Pt. No. 46620
CE compliant product
Advertisement
Table of Contents
Related Manuals for Stuart Turner Jet 80-45 B
Summarization of Contents
Pre-Installation Assembly
Re-positioning of Pressure Vessel
Guidance on rotating the pressure vessel to alternative positions for installation.
Before Commencing Pump Installation
Water Storage and Temperature Requirements
Ensuring sufficient water storage capacity and adhering to water temperature limits.
Pipework Design and Regulations
Guidelines for secure pipework, design to prevent airlocks, and compliance with plumbing regulations.
Safety Warnings and Prohibitions
Critical warnings against specific materials, flux use, and connecting to mains water.
Location - General
Access, Protection, and Ventilation
Guidelines for pump placement, accessibility, protection from freezing, and adequate airflow.
Safety, Water Retention, and Temperature
Safety considerations, spillage containment, and ambient temperature limits for pump siting.
Pressure Limits and Pipework
Ensuring correct static inlet/outlet pressures and optimal pipework sizing.
Flow Direction and Installation Components
Correct water flow direction, use of isolating valves, strainers, and suction lift considerations.
Location - Pump Mounted Below Water Source
Water Supply Requirements
Ensuring a dedicated water supply is made directly to the pump via a tank connector.
Location - Pump Mounted Above Water Source
Self Priming and Footvalve Use
Details on self-priming capability, and the importance of using a footvalve and strainer.
Suction Pipe and Connections
Guidance on suction pipe layout, ensuring airtight connections, and preventing collapse.
Footvalve/Strainer Positioning
Correct positioning of the footvalve/strainer to avoid blockage from debris or silt.
Electrical Installation and Earthing
Regulations and Safety Precautions
Adherence to electrical regulations, use of RCD, and ensuring power isolation before work.
Earthing and Pipework Bonding
Proper earthing of the appliance via supply cord and supplementary bonding of metallic pipework.
Wiring and Connections
Guidance on connecting the pump to the mains supply and wiring colour codes.
Wiring Diagram and Fuses
Wiring Diagram Explanation
Illustration of the pump's internal and supply cord wiring connections.
Recommended Fuse Size
Specifies the appropriate fuse size (13 Amps) for all pump models.
Commissioning
System Flushing and Water Supply
Flushing the system before connection and ensuring adequate water supply for priming.
Priming and Starting Procedure
Steps for priming the pump chamber and starting the pump correctly.
Operational Checks and Support
Verifying correct operation, leak checks, and contact for technical support.
Maintenance
Pressure Vessel Air Charge Check
Procedure for checking and replenishing the pressure vessel's air charge every six months.
Cleaning Agents and Chemical Safety
Warning against using aggressive cleaners and procedures for system flushing.
Technical Specification
Pump Model Specifications
Detailed comparison of Jet 55-45 B and Jet 80-45 B models' features and performance.
Electrical and Physical Data
Specifications for electrical supply, power consumption, fuse rating, and physical dimensions.
Noise Level Information
Specifies the equivalent continuous A-weighted sound pressure level at 1 metre.
Trouble Shooting Guide
Pump Not Starting or Hunting
Diagnosing and resolving issues related to the pump failing to start or cycling frequently.
Pump Runs with No Water or Poor Performance
Troubleshooting common causes for no water flow or reduced performance.
Fault Finding and Protection
Dry Run Protection Sequence
Explanation of the protective logic sequence for detecting and responding to dry running.
Fault Finding Indicator Light
Procedure to check the 'power on' indicator light on the PCB for fault diagnosis.
Environment Protection
Product End-of-Life Disposal
Information on recycling valuable materials and proper disposal at civic waste points.
Your 1 Year Guarantee
Guarantee Terms and Conditions
Details of the 1-year guarantee, coverage, exclusions, and claim procedures.
Installer Registration
Information for installers to register and gain benefits like Approved Installer status.
Need help?
Do you have a question about the Jet 80-45 B and is the answer not in the manual?
Questions and answers