Related Manuals for Arkel ADrive 4B110
Summarization of Contents
Introduction to ADrive
EMC Conformity
Ensures compliance with industrial environment standards for emission and immunity.
ADrive Dimensions and Mounting
Physical Dimensions: Size-B & Size-C
Details physical measurements for ADrive models Size-B and Size-C.
Physical Dimensions: Size-D
Provides physical measurements for ADrive model Size-D.
Mounting of ADrive Size-D
Step-by-step guide for mounting the ADrive Size-D unit.
ADrive Line Filter (EMI)
EMI Line Filter Dimensions
Diagram showing dimensions and installation of the EMI line filter.
ADrive Braking Resistors
Braking Resistor Dimensions
Illustrations and dimensions for ADrive braking resistor types A, B, and C.
RFI Filter (Zero-phase Reactor)
RFI Filter Wiring Diagrams
Wiring instructions for connecting RFI filters to ADrive Size-B/C and Size-D.
ENCABIT-Plus Module
ENCABIT-Plus Module Description and Mounting
Details the ENCABIT-Plus module's purpose and installation procedure.
ADrive Connections
Power Terminal Connections
Explains connections for mains, brake resistor, and motor power terminals.
Control Terminal Connections
Details connections for drive command inputs and control signals.
Incremental Encoder Connection
Guidance on connecting incremental encoders for asynchronous motors.
Absolute Encoder Connection
Instructions for connecting absolute encoders for synchronous motors.
Mechanical Brake Release Monitoring
Describes monitoring connections for mechanical brake release status.
Temperature Monitoring Inputs
Explains connections for motor and brake resistor temperature monitoring.
External Power Supply and Module Connection
Details external 24VDC supply and ENCABIT-Plus module communication.
ENCABIT-Plus Inputs/Outputs
Describes digital inputs and transistor outputs on the ENCABIT-Plus module.
Communication Interfaces
Covers serial communication with ARL-500 and remote keypad connection.
Emergency Evacuation Operation
Evacuation General Information & Power Supplies
Overview of evacuation modes and required back-up power sources.
Evacuation: Lower Load Direction
Details evacuation method in the lower load direction and power calculations.
Evacuation: Command Direction
Details evacuation method towards the command direction and power calculations.
Back-up Power Wiring
Shows wiring diagrams for battery and UPS back-up power during evacuation.
Evacuation Travel Process
Describes the sequence of operations during an elevator evacuation trip.
PC Connection and Software
ADrive-Win Software & Firmware Updates
Information on using ADrive-Win for monitoring and upgrading firmware.
LCD Screen and Keypad Usage
Startup and Monitoring Screens
Describes initial startup screen and various monitoring screen displays.
ADrive Parameter Configuration
1-Travel Curve Parameters
Defines parameters for elevator travel curve, speed, and acceleration profiles.
2-Motor Setup Parameters
Specifies parameters related to motor type, voltage, current, frequency, and poles.
3-Controller Setup Parameters
Details parameters for PI speed control, anti-rollback, and filters.
Parameter Groups: Key, Faults, Control, Language, Defaults
Covers parameter groups for data key, fault history, control type, language, and defaults.
Parameter Groups: Auto Tune and Password
Explains auto-tuning functions and password protection for parameter access.
11-Advanced Settings Parameters
Covers advanced settings like switching frequency, current control, and input functions.
12-Battery Operation Parameters
Defines parameters for battery voltage, direction, speed, and UPS power during evacuation.
13-Drive Mode Settings
Sets the operational mode of the drive, including normal, test, and unjamming modes.
Driving Synchronous Machines
Synchronous Motor Setup: Encoder, Parameters, Autotuning
Covers encoder setup, essential motor parameters, and autotuning for synchronous motors.
Need help?
Do you have a question about the ADrive 4B110 and is the answer not in the manual?
Questions and answers