ESET NOD32 TYPICAL - V2.7 Installation Manual page 9

Whether from a CD or from a download, the installation instructions from
this point are the same.
You will see this screen:
Click to begin
Extract
the installation process.
The extraction path can be changed in the
box. This will not affect the final installation directory, only
where the installation files are put during setup. These files
can be removed after NOD32 setup completes.
If installing onto a 64-bit operating system, the installer will
automatically install a compatible version, but the Extract
path will read:
After clicking
Extract
you will see the files
being expanded onto
the disk:
...and then you should
see the following
message:
Once the Setup Wizard has started, you will be presented with the
Installation choices....
NOD32 Typical
C:\Program Files (x86)\ESET\Install
Installation Guide
"Extract to"
9