IBIS Dear IBIS Customer, Congratulations on your fine new loudspeakers and thank you very much for choosing IBIS! You have made an excellent choice. The high-quality speakers produced by IBIS are bringing you a pleasant surprise! Please study the instructions and information below carefully before using your new loudspeakers.
BI-WIRING Bi-wiring option has been supplied on all IBIS H series loudspeakers, Bi-wiring involves the use of two pairs of speaker cables between your loudspeakers and amplifier. If you wish to bi-wire your H6 or H5 speakers, it is essential that you first unscrew all the binding posts and remove the motel links that join them together.
Page 4
If not, switch off and remake the connections. RUNNING IN Your IBIS loudspeakers require a little gentle use to allow their working components to settle into their proper working routine. Do not concerned if your new speakers sound aggressive and lacking in low-frequency authority when you first begin to use them.
Page 5
PROTECTIVE GRILLES Your IBIS loudspeakers are supplied with protective grilles. The use of these grilles is entirely optional and many owners prefer the appearance of the loudspeakers without them. A small reduction in clarity may be apparent with the grilles on. Do remember that young children and...
This warranty is applicable in China only and given in addition to your statutory rights. OUTSIDE CHINA Service enquiries in countries other than China should be addressed to the local IBIS agent or distributor. Warranties gr anted in these countries are entirely at the discretion of the agent or distributor.
Page 7
89dB/2.83V/1m Amplifier Compatibility 25 – 120 Watt (s) into 6 Ohms Positioning Not less than 20cm from rear wall IBIS IHT2540N, 25mm titanium dome, Neodymium Tweeter magnet system with aluminium heat sink, Dimond cutted Aluminium front plate with designed special...
Page 8
Amplifier Compatibility 50 – 150 Watt (s) into 6 Ohms Positioning Not less than 20cm from rear wall IBIS IHT2540N, 25mm titanium dome, Neodymium Tweeter magnet system with aluminium heat sink, Dimond cutted Aluminium front plate with designed special horn projection...
Page 9
LCD or LED monitor, if close to the floor, angle the speaker up a little to aim at listener’s face Tweeter IBIS IHT2540N, 25mm titanium dome, Neodymium magnet system with aluminium heat sink, Dimond cutted Aluminium front plate with designed special...
Page 13
IBIS IBIS - HC500 C500 HC500 IBIS H SUB 280 A L & R H SUB 280A(L&R) H500 or H600 5 AV Subwoofer 6 AV Subwoofer IBIS – IBIS + + + + IBIS IBIS IBIS IBIS + 86 0512 – 69598809 215000 www.IBIS-audio.com...
Page 14
IBIS H500 60 / 120 Watt (s) 50 – 40 000 Hz 6 Ohms normal 88dB/2.83V/1m 25 – 120 Watt (s) into 6 Ohms 20cm. IBIS IHT2540N, 25mm 130mm Conex ) – mm 326 x 174 x 210 14.2 Page 13...
Page 15
H600 85 / 150 Watt (s) 45 – 40 000 Hz 6 Ohms normal 89dB/2.83V/1m 25 – 120 Watt (s) into 6 Ohms 20cm. IBIS IHT2540N, 25mm 160mm Conex ) – mm 375 x 200 x 250 21.6 Page 14...
Page 16
(HC500) 85 / 150 Watt (s) 55 – 40 000 Hz 6 Ohms normal 90dB/2.83V/1m 25 – 150 Watt (s) into 6 Ohms 20cm IBIS IHT2540N, 25mm 130mm Conex ) – mm 450 x 174 x 230 11.2 Page 15...
If you are unable to register on line and you live in the China, please complete this card and return it to IBIS Ltd. If you live in in another country please complete this card and return it to the IBIS distributor. You will find all distributor address on the reserse side of this card.
Need help?
Do you have a question about the 600 and is the answer not in the manual?
Questions and answers