ESET GATEWAY SECURITY Installation Manual page 12

Once the product package has been successfully installed, it is time to become familiar with
its content.
AGENTS
esets_ftp
esets_http
esets_ssfi.so
The structure of ESET Gateway Security is shown in the figure 4-1. The system is composed of
the following components.
CORE
Core of ESET Gateway Security consists of ESETS daemon esets_daemon. The daemon uses
ESETS API library libesets.so and ESETS loading modules em00X_xx.dat to provide base system
tasks: scanning, maintenance of the agent daemon processes, maintenance of the samples
submission system, logging, notification, etc.. Please refer to esets_daemon(8) manual page for
details.
AGENTS
The purpose of ESETS agent modules is to integrate ESETS with the Linux/BSD/Solaris Server
environment. Please note a special chapter in this document devoted to the topic.
UTILITIES
The utility modules are particular fraction of the system. They are developed to provide
simple and effective management of the system. They are responsible for relevant system tasks,
e.g. license management, quarantine management, system setup and update. Please note a
special chapter in this document devoted to the topic.
CONFIGURATION
Proper configuration is the most important condition for the system operation. Therefore we
describe all the related components in the rest of this chapter. We also strongly recommend to
read esets.cfg(5) manual page, an essential information source regarding ESETS configuration.
After the product is successfully installed, all its configuration components are stored in
ESETS configuration directory. The directory consists of the following files.
12
Figure 4-1. Structure of ESET Gateway Security.
WWW INTERFACE
CONFIGURATION
esets.cfg
CORE
system
service
license
UTILITIES
scripts
scanning
engine
esets_lic
esets_quar
esets_setup
esets_update
ESET Gateway Security