Denon AVR-3801 Operating Instructions Manual page 56

• Operating the surround mode and surround parameters from the main unit's panel.
1 Turn the SELECT knob to select the surround mode.
(Main unit)
• When turned clockwise
DIRECT STEREO
MATRIX
• When turned counterclockwise
DIRECT STEREO
MATRIX
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode button
then operate the selector.
SURROUND
(Main unit)
2 Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and Parameters" on page 57.)
SURROUND
PARAMETER
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC, DTS NEO:6 modes and the input signal switches to a digital
signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode
automatically switches to DTS surround.
SELECT
DOLBY PRO LOGIC DTS NEO:6
VIDEO GAME JAZZ CLUB
DOLBY PRO LOGIC DTS NEO:6
VIDEO GAME JAZZ CLUB
MODE
5/7CH STEREO WIDE SCREEN
ROCK ARENA MONO MOVIE
5/7CH STEREO WIDE SCREEN
ROCK ARENA MONO MOVIE
55