Content Product Introduction Product Introduction 9.4 Unlock Time Thank you for purchasing the intercom. Please read instructions carefully and follow directions before Parts and Features 9.5 CCTV Surveillance Period Menu Introduction 9.6 Extension Switch Time installing products. Any problems regarding this product, please contact your supplier. Main Menu Interface 10.System Setup Function Setup...
Take Photo Speaker(E706FC Series) Right/Down/Mute Review Picture Unlock/Return Down Select Menu Talk/Stop/Power Return NOTE Delete 1.The button function of E705FC Series and E706FC Series are corresponding. 2. Touch the center of button to operate the unit (as the finger indicate).
Exit main menu touch Away setting (Only available for W100) AWAY MUTE Do Not Disturb (mute) Setup Note: During operation, power LED keeps lighting. Keytone Setup E705FC W100 TIME Unlock Time Setup OPEN CCTV TIME CCTV Surveillance Period Setup TIME Extension switch time setup AUX.
Menu Function Menu Function System setup Help Menu 2ND / PEDAL CTRL 20140222 Under main menu interface, touch Under main menu interface, touch 20140113 ROOM NO. SET HOLD LEFT REVIEW PHOTO Storage Help choose the “SYSTEM SET” item, then touch choose the “HELP SET”...
When the door station rings, touch to start talk. (You need to pickup the handset to talk when connect with Door 2. you use E705FC) 3.2 When the room station is in monitor mode, touch to start talk. Note:Refer to operation 4.1 for Monitor operation.
The function is invalid. meanwhile mute LED flashes, it means the extension switch Outer device is triggered. The switch will be automatically turned off after the E705FC/E706FC-W100 5.Unlock POWER setting time. When the room station is talking with door station, touch to open the door.
Operation Operation 9.1 Away Setup (Only available for W100) to turn ON/OFF keytone. AWAY Under function setup interface, choose the “AWAY SET” item by touching , then touch MUTE Storage Help SOUND to turn ON/OFF away mode. OPEN TIME CCTV TIME MANUAL AUX.
Operation Operation 10.System Setup AWAY MUTE Under main menu interface, touch to choose SYSTEM , then touch to enter into Storage Help SOUND OPEN TIME function setup interface. CCTV TIME MANUAL AUX. TIME 2ND / PEDAL CTRL ROOM NO. SET MANUAL Storage Help...
Operation Operation 2ND / PEDAL CTRL ROOM NO. SET Storage Help MUSIC TIME 20XX/01/01 01:00 RESET LANGUAGE ENGLISH Calling from 1 door (the outdoor unit) Calling from 2 door (equipped with the calling device) Note: Please make sure every room has its own room number to avoid confliction. When you turn on pedal control for talk mode 10.3 Ringtone Setup 1.
Operation Operation 2ND / PEDAL CTRL MUSIC 2ND / PEDAL CTRL MUSIC MUSIC MUSIC ROOM NO. SET ROOM NO. SET MUSIC VOLUME MUSIC VOLUME Storage Help MUSIC MUSIC Storage Help MUSIC TIME MUSIC TIME TIME 20XX/01/01 01:00 TIME 20XX/01/01 01:00 RESET RESET LANGUAGE...
Operation Operation 10.6 Language Setup 20XX/XX/XX 12:00 Under system setup interface, choose LANGUAGE ,and touch to confirm, then you can choose Storage Image the language between ENGLISH POLSKI and РУССКИЙ. 2ND / PEDAL CTRL ROOM NO. SET Storage Help MUSIC 11.1 Take Photo TIME 20XX/01/01 01:00...
Operation Operation 12.2 Contrast 11.3 Delete Picture Under image adjustment interface, choose CONTRAST to adjust the contrast, you are able to adjust Under image memory interface, choose DEL ALL, touch to confirm, all of the pictures will be in 100 levels. Deleted.
Operation Operation 13.Busy Status 15.Alarm Guide When one of the room stations is under talking or monitoring mode, others will enter into busy mode. 15.1 Room Number Confliction Alarm After finishing talking or monitoring, all of the units will go back to standby mode. When the system has more than two room station with a same room number, the unit will sound “DI”...
LED flashes The extension switch is triggered. door station. LED flashes Improper hang up(E705FC, E705FC-W100) The main unit is OFF. Refer to Operation 1 “ON/OFF”, turn on the unit. “DI DI” at intervals when the system connects -The connection between this unit and the -Check the connection between this unit and with more room stations.
Specifications Model No. E705FC E705FC W100 E706FC E706FC-W100 Item Screen 7’color TFT Power voltage and current AC100-240 ~50Hz/60Hz 15VA or DC13.5-15V/1.5A Connection In series Talk mode Handset Hands free Power consumption 600mA ) CCTV input Typical 1Vp-p(75ohm -10℃ +55℃ Operation temperature...
Need help?
Do you have a question about the E706FC and is the answer not in the manual?
Questions and answers