EN 61000-6-4:2001, EN55011 (Group 1, Class B). Limited Warranty AQ M-Tech AB warrants to the original end user that the Level Switch is free from any defects in materials or workmanship for a period of one year from the date of purchase. During the warranty period, should the Level Switch have indications of failure due to faulty workmanship or materials, AQ M-Tech AB will replace it with no charge.
Level Switch is made to be used together with the Ultrasound Controller D72 or DP72. Level Switch LS is also available ATEX certified, see Level Switch EX manual. Level Switch KS is a new Level Switch with improved specifications that can be used instead of Level Switch LS.
Level Switch KS can be used in Gel Sensor Mode. The ultrasound must pass easy into the container or pipe; therefore there must be a tight ultrasound-connection without any air-gap between the Level Switch and the wall.
Attaching tape above or below the Level Switch does not help. The tape is supplied with the Level Switch in 500mm length and can also be ordered separately from AQ M-Tech, order number 101310. The material is polyurethane and acetone should not be used for cleaning the tape.
Need help?
Do you have a question about the RS and is the answer not in the manual?
Questions and answers