Icron Ranger 2344 User Manual

4-port usb 2.0 fiber optic extender system

Advertisement

Quick Links

USB 2.0 Ranger
2324/2344
®
4-Port USB 2.0 Fiber Optic Extender System
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ranger 2344 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction
Product Contents
Lists all items included in the USB extender system package.
Key Features
Highlights the main capabilities and technologies of the USB extender system.
The LEX Unit
LEX Unit Components and Indicators
Details the front/rear components, LEDs, and ports of the Local Extender unit.
The REX Unit
REX Unit Components and Indicators
Details the front/rear components, LEDs, ports, and power input of the Remote Extender unit.
Installation Guide
System Installation Overview
Covers fiber optic cabling, requirements, and site preparation for installing the USB 2.0 Ranger system.
LEX Unit Installation and Connection
Steps for installing the LEX unit and connecting it to the REX unit via fiber optic cable.
REX Unit Installation and Verification
Instructions for installing the REX unit and checking the system installation status.
Connecting and Verifying USB Devices
Guides on connecting USB devices to the REX and verifying their detection by the operating system.
USB Device Compatibility Notes
Discusses compliance with USB standards and potential compatibility issues with devices over extended distances.
Optional USB Extender Mounting
USB Extender Mounting Kit Installation
Instructions for installing the optional mounting kit, including bracket and screw details.
Direct Surface Mounting Stencil and Instructions
Provides instructions and a stencil for mounting the extender directly onto a surface using custom hardware.
Troubleshooting Common Issues
LED Status and Connectivity Problems
Solutions for issues related to all LEDs being off, link LEDs off, or host LEDs off.
System Suspend and Device Recognition
Addresses problems where the REX unit enters suspend mode or the system is not recognized correctly.
USB Device Not Operating or Detected
Troubleshoots scenarios where USB devices fail to operate or are detected as "Unknown Device".
Power, Firmware, and Compatibility Issues
Solutions for device LED issues, power overcurrent, and potential firmware mismatches or device incompatibility.
Warranty Information
Hardware Warranty Terms and Exclusions
Details the limited hardware warranty period, coverage, and exclusions for defects.
Warranty Remedies and Liability Limits
Explains Icron's liability limits and the remedies available for warranty claims.
Procedure for Obtaining Warranty Service
Outlines the steps to follow for obtaining warranty service, including RMA process.
Product Specifications
Range, Throughput, and Device Support
Specifies operational range, maximum throughput, and support for USB devices and hubs.
LEX/REX Unit Physical and Electrical Specs
Lists dimensions, connectors, enclosure material, and power supply details for both units.
Environmental, Compliance, and Warranty
Covers operating conditions, humidity, compliance certifications, and warranty duration.
Contacting Technical Support
Information for Support Requests
Lists required information to provide when contacting support for troubleshooting assistance.
Product Return and Sales Contact Information
Provides the address for product returns and contact details for sales inquiries.
Technical Glossary
USB 2.0 Cable Connectors Explained
Explains the function of USB Type-A and Type-B connectors on USB 2.0 cables.
Duplex LC Fiber Optic Cable Definition
Defines Duplex LC fiber optic cables and their transmit (TX) and receive (RX) signals.

Table of Contents