Related Manuals for bit 2K
Summarization of Contents
Important Safety Warning
1-1. Transportation
Transport UPS in original package for protection against shock and impact.
1-2. Preparation
Acclimate UPS to environment, avoid moisture and direct sunlight, ensure ventilation.
1-3. Installation
Connect devices properly, use grounded outlets, certified cables, avoid overloading.
1-4. Operation
Do not disconnect mains during operation; UPS output remains live.
1-5. Maintenance, Service and Faults
Repairs by qualified personnel only. Disconnect batteries before service and check for voltage.
Installation and Setup
2-1 Rear Panel View
Diagrams illustrating rear panel connections for different UPS models and ports.
2-2 Install the UPS
Steps for connecting battery wires, rack-mount, and tower installation.
2-3 Setup the UPS
Connect UPS input to a grounded receptacle and output to devices.
Communication and Network Setup
Connect communication cables and network lines for monitoring and surge protection.
EPO Function
Procedure to enable or disable the Emergency Power Off (EPO) function.
Powering On and Software Installation
Instructions to turn on the UPS and install monitoring software.
2-4 Battery Replacement
Step-by-step guide for hot-swappable battery replacement.
2-5 Battery Kit Assembly
Instructions for assembling optional battery kits for the UPS.
Operations
3-1 Button Operation
Explains the functions of the ON/Mute, OFF/Enter, and Select buttons on the UPS.
3-2 LCD Panel Overview
Details the LCD display elements and information for Rack and Tower models.
3-3 Audible Alarm
Describes alarm patterns for low battery, overload, and fault conditions.
3-4 LCD Display Wordings Index
Provides a reference for abbreviations and their meanings shown on the LCD.
3-5 UPS Settings
Guides through configuring UPS parameters via Parameter 1 and Parameter 2.
Output Voltage Setting
Allows selection of the UPS output voltage from available options.
Frequency Converter Mode
Enables or disables the frequency converter mode for the UPS.
Output Frequency Setting
Configures the output frequency for battery or converter modes.
ECO Mode
Explains how to enable or disable the Energy Saving (ECO) mode.
AECO Mode
Details the enabling/disabling of Advanced ECO (AECO) mode for energy efficiency.
Bypass Mode
Covers enabling or disabling the bypass mode for direct power pass-through.
Programmable Outlet Configuration
Manages enabling/disabling and setting backup time for programmable outlets.
LCD Display Direction
Sets the LCD display orientation to horizontal or vertical.
Acceptable Input Voltage Range
Configures the acceptable input voltage range for the UPS unit.
3-6 Operating Mode Description
Explains various UPS operating modes like Online, ECO, Battery, and Fault.
3-7 Faults Reference Code
Lists fault events, codes, and icons for troubleshooting UPS issues.
3-8 Warning Indicator
Details warning indicators, their codes, and associated alarm sounds.
Storage and Maintenance
5-1. Operation Notes
Information on UPS lifespan, battery replacement, and proper disposal of used batteries.
Storage Guidelines
Recommendations for storing the UPS, including charging frequency and duration.
Need help?
Do you have a question about the 2K and is the answer not in the manual?
Questions and answers