Related Manuals for Masoneilan 172 Series
Summarization of Contents
Safety Information and Warnings
Hazard Level Definitions
Defines DANGER, WARNING, and CAUTION hazard levels and the safety alert symbol.
General Safety Precautions
Lists essential safety precautions for installation, operation, and maintenance, including handling damaged equipment.
Manual and Warranty Details
About This Manual
Information regarding manual scope, subject to change, and reporting errors.
Product Warranty Terms
Details Dresser's product warranty for defects in materials and workmanship.
General Information
Introduction to Maintenance
Overview of instructions for maintenance of 171 & 172 Series regulators.
Transport, Storage, and Handling
Guidelines for Transport, Storage, and Handling
Covers methods for transport, storage conditions, and handling precautions for regulators.
Installation and Assembly: 171 & 172 Series
Cross-Sectional Drawings and Part Identification
Detailed cross-sectional views and identification of parts for 171 & 172 Series regulators.
Installation of 171 & 172 Series Regulators
Regulator Orientation and Piping Preparation
Details correct actuator orientation and the necessity of clean piping for installation.
ATEX Usage and Sensing Line Connections
Covers ATEX usage warnings and the use of external sensing lines for stable pressure.
Pressure Sensing and Filter Recommendations
Addresses pressure sensing port location, pressure drop effects, and filter installation advice.
Start-Up and Calibration
Adjusting Pressure Setting
Instructions on how to adjust the regulator's pressure setting using the adjustment screw.
Maintenance Procedures: 171 & 172 Series
General Maintenance and Disassembly
Covers establishing maintenance intervals and steps for actuator and body disassembly.
Parts Inspection and Reassembly
Guidance on inspecting components, paying attention to wear, and reassembly procedures.
Diaphragm Replacement
Details the process for replacing the diaphragm, including isolation and actuator removal.
Model 171 Specifics
Model 171 Cast Iron Body Differences
Highlights differences for Model 171 with cast iron body, particularly blindhead attachment.
Installation and Assembly: 172-50 Differential Pressure
Cross-Sectional Drawings for Single Diaphragm
Detailed cross-sectional views and part identification for 172-50 Single Diaphragm regulators.
Installation and Assembly: 172-50 Double Diaphragm
Cross-Sectional Drawings for Double Diaphragm
Detailed cross-sectional views and part identification for 172-50 Double Diaphragm regulators.
172-50 Regulator Groups and Installation
172-50 Regulator Groups Explained
Describes Group 1 (Single Diaphragm) and Group 2 (Double Diaphragm) regulators.
172-50 Installation Requirements
Details required actuator orientation and diaphragm positioning for 172-50 regulators.
172-50 Installation Diagrams and Piping
Covers installation diagrams, piping considerations, isolation valves, and filters.
172-50 Pressure Sensing and Safety Valve
Addresses pressure sensing port, pressure drop effects, and safety valve installation.
172-50 Start-Up, Calibration, and Maintenance
172-50 Start-Up and Calibration
Procedures for start-up and calibration of 172-50 regulators, including valve sequencing.
172-50 Maintenance and Disassembly
General maintenance intervals and steps for actuator and body disassembly for 172-50 regulators.
172-50 Reassembly and Diaphragm Replacement
172-50 Reassembly Procedures
Steps for reassembling 172-50 regulators, including diaphragm and component installation.
172-50 Diaphragm Replacement
Details the process for replacing the diaphragm in 172-50 regulators.
Need help?
Do you have a question about the 172 Series and is the answer not in the manual?
Questions and answers